Removing KW EDC Cancelation kit

[MINERALGREY_F80M3]

How's it going everyone!

My first post here since my recent purchase of a 15' Mineral white with carbon interior F80 M3!

Very excited to be apart of the community!

When I purchased the car I had some previous info about it from the previous owner. The issue I am having is that the car previously had KW V3 coilovers installed and returned to the oem EDC suspension. However, the shop left the KW cancellation kit connected and obviously it does not change settings when i press the EDC button.

I managed to find the cable from the top of the shock tucked away under some plastics, but since the KW module is connected I cannot disconnect and connect the oem cable, do I need to purchase the new connectors and re-pin them to work?

I am going nuts here because I cannot find a solution online.

Any help is appreciated!!

[Keebin]

yeah you will need new connectors, i remember swapping mine when i did the v3 install with the delete. i know some one will chime in with the part numbers.

[MINERALGREY_F80M3]

Ah awesome! I figured that would be the case, part # would be fantastic!

Thanks for the confirmation

[jd__m4]

I'm guessing you're the fella on reddit from yesterday?

Is this what you're looking for? https://www.ecstuning.com/b-genuine-...c/31312284780/

[MINERALGREY_F80M3]

Yes that was me!

Not quite, that part is intact and connected, the KW lot comes with its own connector that replaces the oem unit, similar to the one pictured below

The current plug that comes from the KW unit will not plug into the blue end of the oem unit

[MINERALGREY_F80M3]

Updated last comment with picture of the plugs I believe I will need, but OEM version!

Thank you

[danniexi]

Originally Posted by eyeamgrewt

I'm guessing you're the fella on reddit from yesterday?

there are dozens of us

[jd__m4]

Originally Posted by MINERALWHITE_F80M3

Yes that was me!

Not quite, that part is intact and connected, the KW lot comes with its own connector that replaces the oem unit, similar to the one pictured below

The current plug that comes from the KW unit will not plug into the blue end of the oem unit

Is this what you're talking about?

[MINERALGREY_F80M3]

Yeap that's them!

Fortunately I've been speaking to the previous owner and he let me know he has the original plugs! I'm going to try and have them installed and will report back

Thanks all for your insight

[MINERALGREY_F80M3]

Yeap that's them!

Fortunately I've been speaking to the previous owner and he let me know he has the original plugs! I'm going to try and have them installed and will report back

Thanks all for your insight

[PJDK]

Anyone have a part number for the yellow plugs? Thx.

[Spun Crankhub]

Originally Posted by PJDK

Anyone have a part number for the yellow plugs? Thx.

They are part of the KW EDC delete kit. You can try contacting KW but their service and access to parts has been significantly hindered by the pandemic.

[smokeywokey]

Originally Posted by MINERALWHITE_F80M3

Updated last comment with picture of the plugs I believe I will need, but OEM version!

Thank you

sorry to open up an old thread but i’m in the same boat, my car has bags on it and trying to revert back to stock but i need OEM harness side connectors, were you able to find any? or am i just gonna have to snip both sides of each connector and wire it together like that