eBay product ratings thread

[Dang3r]

Originally Posted by Kilabyte

Are your handles plastic or did you wrap the leather? I just got my 6D wrap delivered and went out to the car noticing that mine are leather.

Had leather ones too and bought second had plastic ones, wrapped with said 6D CF and be done.

[Kilabyte]

Originally Posted by Dang3r

Had leather ones too and bought second had plastic ones, wrapped with said 6D CF and be done.

Thanks. I'll do that.

I do need to replace the inner side of the handle in the driver's door as there's some wear, do they sell both pieces?

[Dang3r]

Originally Posted by Kilabyte

Thanks. I'll do that.

I do need to replace the inner side of the handle in the driver's door as there's some wear, do they sell both pieces?

No need to replace the inner handles into your car, if you remove the covers carefully with a plastic spatula, the material should receive no noticeable damage.
The handle covers got usually sold as pairs, have a look at ebays, e.g. here and here.

[Hoppyumr]

Originally Posted by Patural

RKP replica carbon spoiler F83 ebay. Paid $260 shipped and the test fitment is pretty damn good 9/10. Quality 9/10. Took a few months to get to me.

https://www.ebay.com/itm/Carbon-Fibe...97.m4902.l9144

I appreciate the info so far on this. Any possibility of snapping a few close up shots shots of the RKP style spoiler? Is the carbon weave good too?

I've been eyeing this type spoiler for a bit now. Just gotta convince the wife after spending almost 60k out the door already.

[Patural]

Originally Posted by Hoppyumr

I appreciate the info so far on this. Any possibility of snapping a few close up shots shots of the RKP style spoiler? Is the carbon weave good too?

I've been eyeing this type spoiler for a bit now. Just gotta convince the wife after spending almost 60k out the door already.

The weave looks good imo. Not sure if you can zoom in on this shot. I'll take a few more up close once I wash the car for the weekend.

[churchillps]

Originally Posted by Patural

The weave looks good imo. Not sure if you can zoom in on this shot. I'll take a few more up close once I wash the car for the weekend.

Link?

[Patural]

Originally Posted by churchillps

Link?

https://www.ebay.com/itm/Carbon-Fibe...97.m4902.l9144

Looks like it's sold out but you could ask if they are going to restock.

[Kilabyte]

Originally Posted by churchillps

Link?

Keep in mind that the product linked is for a coupe.

[Hoppyumr]

Originally Posted by Kilabyte

Keep in mind that the product linked is for a coupe.

The link 2 posts directly above is for the F83/F33, so it is for the Convertible trunk rather than the F80/F82.

[11LMBiSTT]

Anyone have a link for the 6D Carbon Vinyl?

[jd__m4]

Originally Posted by 11lmbistt

anyone have a link for the 6d carbon vinyl?

Originally Posted by jd__m4

just finished wrapping them, man the 6d stuff looks great. The one i bought from amazon is also much easier to work with than the vvivid stuff.

Here's the 6d wrapped one (bottom) vs. The amazon handles



6d (bottom) vs. Vvivid's 3d:



another shot of the 6d:



for anyone interested, here's the vinyl i bought:

https://www.amazon.com/gp/product/b0...?ie=utf8&psc=1

👍🏻

[Kilabyte]

Originally Posted by Hoppyumr

The link 2 posts directly above is for the F83/F33, so it is for the Convertible trunk rather than the F80/F82.

Person asking lists an f80 in their profile, hence my response.

[F80RN]

Ordered this. Will report back with my impressions.

[aliiin]

Saw a few steering wheel recommendations in the thread, some of the links expired. I was also wondering how they held up over time for those of you that got one. Some of them seem like a steal compared to other ones on the market.

Anyone got any steering wheel recs?

[MNhv]

anyone got links to a M3 CS style rear spoiler?

[blkcow]

Originally Posted by F80RN

Ordered this. Will report back with my impressions.

Any feedback yet?

[Kilabyte]

Originally Posted by MNhv

anyone got links to a M3 CS style rear spoiler?

https://www.ebay.com/itm/For-2015-18...=10001&mkevt=1

[F80RN]

Originally Posted by blkcow11291

Any feedback yet?

So for the lightweight lip, I'd pass on it. It seems that there's a lot more work involved to try and get it mounted and I'm sure there's better options out there


As for the splitters fitment is 8/10. On the right side there's a very small gap which you'd only notice if you searched for it. It's minor but enough of an irritation if you're a perfectionist.

I also included a roof shot case, at least to me, the splitters seems to be a very very close match to the carbon roof, and I personally can't seem to find a difference

[blkcow]

Originally Posted by F80RN

So for the lightweight lip, I'd pass on it. It seems that there's a lot more work involved to try and get it mounted and I'm sure there's better options out there


As for the splitters fitment is 8/10. On the right side there's a very small gap which you'd only notice if you searched for it. It's minor but enough of an irritation if you're a perfectionist.

I also included a roof shot case, at least to me, the splitters seems to be a very very close match to the carbon roof, and I personally can't seem to find a difference

The splitters look pretty good! As for the lip what do you think it would have taken to get it mounted? It looks like there isn’t a center post for support for one…

[F80RN]

Originally Posted by blkcow11291

The splitters look pretty good! As for the lip what do you think it would have taken to get it mounted? It looks like there isn’t a center post for support for one…

Honestly I feel it isn't worth it. As you mentioned there's no center post. And it also seems to be too wide for the car.

[Dav3]

Originally Posted by FatHulk

would be interested to see how the fitment is keep us in the loop and pics please!

The Aliexpress CF seat inserts ended up being of really high quality

Real carbon fiber, perfect fitment and great price. 1/3 of the price of alternatives, and I dare to say the same quality.

[Whatcoloristhat]

Originally Posted by Dav3

I picked up these from aliexpress, can anyone who previously bought them comment on fitment and quality?

Pictures look good, pricing is even better, anywhere from 50-80% less than traditional retailers (whom some I suspect straight up dropship from here)

Around 300$ for seat rear carbon shells, 15$ for door handle trim and 30$ for dct surround carbon bit

Did you install the door level handles and seat shells? How’s the fitment and comparison to oem 2x2 weave?

Edit:just noticed you wrote about seat shells, so it matches oem cf weave? If so might pull the plug but more interested in the full seat shell versions if they offer it?