05-26-2021, 12:19 PM | #1 |
Colonel
505
Rep 2,152
Posts |
Powerflex rear diff bush
Has anyone fitted one of these. I'm looking at the purple one for road use.
Are they a pain to fit? Cheers Lee
__________________
Current: BMW M4 F83 - Mods : Pedal Covers, LCI Stereo facia Retrofit and Carbon Rear corner covers
Old: F32 435d M Sport - Mods : HR Sport Springs, 20" Veemann V-FS23 in Gun Metal, M Performance Body Kit, Pedal Covers, Eurspec CF Mirror Caps, More-BHP remap 364 BHP 741 NM, M4 Under Chassis Brace, 15mm Rear ARB, 8.8" Screen Retrofit and LCI Stereo facia Retrofit |
05-28-2021, 08:46 AM | #2 |
Captain
591
Rep 988
Posts |
Its not complicated. Its straight forward but a lot of stuff to move around to get to it. You can approach it in different ways. Lowering and removing the entire subframe or lowering it and dropping one side.
There is a lot of info/pics spread throughout this thread. https://f80.bimmerpost.com/forums/sh....php?t=1685809 |
Appreciate
0
|
05-29-2021, 12:46 PM | #3 |
First Lieutenant
227
Rep 369
Posts |
Replacing the rear diff bushings is about as complicated as doing a clutch replacement. Ecs has pdf instructions for installing their dual mount plate. Check that out, it’s a lot more straightforward of a procedure than the TIS.
__________________
///M3
|
Appreciate
0
|
05-29-2021, 06:08 PM | #5 |
First Lieutenant
227
Rep 369
Posts |
Not possible, the bolts for the bushings are long enough that dropping the subframe isn’t negotiable.
__________________
///M3
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|