FS: MCS 3WR *like new*

[mikerunt]

BIMMERPOST / Classifieds

Asking Price:

USD 5,995.00

Item Interest

Selling a set of MCS 3WR shocks that were on my GTS for less than 5hrs.

These do not come with the camber plates at the $6495 price.

I spoke with MCS - it will cost ~$1500 to put the correct shafts on the front shocks to work with a standard M4. The rears will work as is. If there is a buyer who owns an M4 I’m open to giving a partial credit for this.

$6495 for MCS 3WR Set
$395 for GC Camber Plates

Front Springs
Length: 5”
Diameter: 60mm
Rate: 14kg/mm

Rear Springs
Length: 6”
Diameter: 60mm
Rate: 12mg/mm

[Lienrocs]

What are the spring rates, lengths and diameters?

[herbotis]

GLWS. I have a 1 way and love my MCS. An amazing suspension upgrade. These should be phenomenal. Each click is one you can feel.

[mikerunt]

Originally Posted by Lienrocs

What are the spring rates, lengths and diameters?

Front
Length: 5”
Diameter: 60mm
Rate: 14kg/mm

Rear
Length: 6”
Diameter: 60mm
Rate: 12mg/mm

[M3SQRD]

Awesome slightly used setup for a great price! Just an FYI, these will only fit in the GTS specific front machined knuckles. I don’t think the adapter sleeve used on the standard/zcp/cs MCS dampers are a direct fit on MCS gts dampers. I’d ask MCS if they able to make a GTS to non-GTS adapter sleeve that fits the standard/zcp/cs front strut and cast knuckles.

[mikerunt]

Originally Posted by M3SQRD

Awesome slightly used setup for a great price! Just an FYI, these will only fit in the GTS specific front machined knuckles. I don’t think the adapter sleeve used on the standard/zcp/cs MCS dampers are a direct fit on MCS gts dampers. I’d ask MCS if they able to make a GTS to non-GTS adapter sleeve that fits the standard/zcp/cs front strut and cast knuckles.

Thanks for the bump. I’ve already spoken to MCS and that info is included in copy above already. Reposting here:

I spoke with MCS - it will cost ~$1500 to put the correct shafts on the front shocks to work with a standard M4. The rears will work as is. If there is a buyer who owns an M4 I’m open to giving a partial credit for this.

[M3SQRD]

Originally Posted by mikerunt

Thanks for the bump. I’ve already spoken to MCS and that info is included in copy above already. Reposting here:

I spoke with MCS - it will cost ~$1500 to put the correct shafts on the front shocks to work with a standard M4. The rears will work as is. If there is a buyer who owns an M4 I’m open to giving a partial credit for this.

Oops… my bad for missing it! I was about to upgrade from 2WR to 3WR but health issues got in the way

[mikerunt]

Originally Posted by M3SQRD

Oops… my bad for missing it! I was about to upgrade from 2WR to 3WR but health issues got in the way

Ah sorry to hear!

[mikerunt]

Midweek Bumpity Ump

[mikerunt]

With a price cut.

[mikerunt]

Bump - looking at all reasonable offers. Easy to adapt for an NON GTS via MCS.