|
Post Reply |
|
Thread Tools | Search this Thread |
10-31-2011, 02:30 PM | #1 |
Moderator / European Editor
1590
Rep 6,752
Posts |
BMW Patents Its Electric Turbocharger Technology. More Power, Less Lag.
BIMMERPOST NEWS BMW Patents Its Electric Turbocharger Technology. More Power, Less Lag. Turbochargers are a popular technology in the automotive world as of late. It allows rather low displacement engines to have relatively high power outputs, while also managing to return fairly good fuel consumption figures (on paper). Despite the technology being decades old, some of its drawbacks could still be improved upon. One of these issues is the well-known problem of turbo size. A smaller turbine spools up quicky but runs out of steam at higher revs while a bigger turbine offers enough power at high revs but often is too slow at lower revs which results in turbo lag. BMW has now patented its own idea on how to address these issues, and it involves the use of an often rumored "electric turbocharger". We reported before that BMW has considered (or may still be considering) the use of an electric turbocharger as part of a potential tri-turbo 6-cylinder engine for the next generation F80 M3 (the latest rumors point towards a bi or tri-turbo inline-6 as the new M3's powerplant). While we still don't know if the next gen M3 will be powered by an engine with an electric turbocharger, we do now know how such an electric turbocharger would be implemented, courtesy of a patent application BMW submittted to the German patent office. First, here's an explanation of the electric turbo's individual parts (as labeled in the diagrams): 1) turbo layout 2) turbine 2') turbine axle 3) compressor 3') compressor axle 4) electric motor (and alternator) 5) turbo axle 6) (turbine axle) clutch 7) (compressor axle) clutch 8) gearing We've highlighted and colored the following schematic diagrams to show how the technology works: Unlike a traditional mechanical turbo layout, (exhaust) turbine and (intake) compressor aren't fixed on the same axle. Via the clutches #6 and #7 both the turbine and the compressor can be uncoupled from the turbine axle (#5). When the engine is idling or coasting, both clutches are open and an electric motor (#4) can operate without any load. Via gearing (#8) the speed of of the e-motor and the turbo axle can be further adjusted. If the driver steps on the pedal the clutch (#7) closes and connects the electric motor (#4) to the compressor (#3). Due to the inertia of the (running!) electric motor, the compressor spools up quickly and compresses enough air to make for a fast engine response, which results in less lag. The turbine (#2) which wouldn't be able to spool up the compressor quickly enough is decoupled due to the clutch (#6) still being open. Once the turbine (#2) has reached a certain speed, the clutch (#6) closes and both the turbine and the electric engine are used to run the compressor (#3). When maximum boost is reached, the electric motor switches to an alternator mode, generates power for the battery, and avoids the turbine exceeding a certain speed. This renders a wastegate needless and ensures sure no energy from the turbine is wasted. If the driver backs off the accelerator, both clutches (#6, #7) open and the electric motor can continue running without any load from the turbine or the compressor. According to BMW's patent application, this invention makes for a great engine response, particularly during the transition from idling to load. It also renders a wastegate needless and adds efficiency. We can't tell if this technology will actually make it into the next M3, but this sounds amazing without any doubt. Thanks to klaus kneip for his tips! We'll keep you updated on the subject, in the meantime check out our previous coverage and spyshots of the F80 M3: http://www.bimmerpost.com/m3/f30m3/ |
10-31-2011, 03:34 PM | #3 |
Captain of the Enterprise
104
Rep 1,424
Posts |
Why is it that these patent drawings always look like Thomas Edison drew them with a straight-edge and quill?
Doesn't anyone at the office have AutoCad?
__________________
2011 1 Series M Coupe VO M3 vs 1M Comparo Review 2011 M3 E90 DCT ZCP (sold) * 2010 335i Sedan (sold) 2005 M3 Convertible (sold) * 2003 325i Sedan (sold) |
Appreciate
2
An20Olives136.00 |
10-31-2011, 03:38 PM | #4 |
First Lieutenant
3
Rep 398
Posts |
interesting, this will obviousley solve the turbo lag problem. i can def. see this being on the new M3 or atleast i hope it will be. a tri-turbo sounds better then a bi-turbo.
__________________
BMW= |
Appreciate
0
|
10-31-2011, 03:41 PM | #5 |
Captain
118
Rep 888
Posts |
|
Appreciate
0
|
10-31-2011, 03:43 PM | #6 |
Captain
70
Rep 883
Posts |
I was thinking the same thing about the drawings. It's like the format needs to be as if it were conceived on the underside of a napkin in a bar.
__________________
'12 E92 M3 | 6MT | ZCP
|
Appreciate
0
|
10-31-2011, 03:53 PM | #7 |
First Lieutenant
3
Rep 398
Posts |
its like their stuck in the past. i guess if it works then why update. who knows.
__________________
BMW= |
Appreciate
0
|
10-31-2011, 04:25 PM | #9 |
Banned
24
Rep 495
Posts |
Originally the rumors were that a tri-turbo set-up would be two traditional turbos and one electric one. Now that we know more about this "electric" turbo, it looks to be an evolution of the turbo that adds electric assist to get it spooling until there is enough exhaust gas to take over. This could allow for the use of bigger turbos without the lag that they are known for.
It seems like this could be used to reduce the number of turbos needed rather than be a supplemental turbo. It will be interesting to see how these are used and how they perform. |
Appreciate
0
|
10-31-2011, 04:51 PM | #12 |
Major
430
Rep 1,461
Posts
Drives: 2018 M3CS
Join Date: Mar 2011
Location: Winnipeg
|
Wow this is incredibly brilliant. However, it also sounds overly complex. Also, what will the lifespan of the clutches be? Sounds like it would be a nightmare to fix if something went wrong.
|
Appreciate
0
|
10-31-2011, 05:09 PM | #13 |
First Lieutenant
3
Rep 398
Posts |
it sounds like this would be 1 contained unit per turbo, so if something goes wrong they might just swap the whole unit out and yes that does sound expensive.
__________________
BMW= |
Appreciate
0
|
10-31-2011, 05:10 PM | #14 |
Colonel
57
Rep 2,197
Posts |
Tricky technology
Although turbochargers by definition operate on exhaust gases. So the electric motor is a supercharger. Or the unit can operate as a turbocharger or a supercharger. Or something. |
Appreciate
0
|
10-31-2011, 06:05 PM | #16 |
247
Rep 2,781
Posts
Drives: E90 335i Racecar
Join Date: Jan 2010
Location: San Diego, CA
|
This will be fun for HPF to do a single turbo upgrade. LOL.
__________________
HG Motorsports | Motiv Motorsport | Sparta Evolution | BBS Motorsports | Sabelt | JRZ | NASA ST1 SoCal --- 554whp/487wtrq --- 3200lbs <<YouTube Channel w/ Race Videos>> |
Appreciate
0
|
10-31-2011, 06:42 PM | #18 |
Happy Camper
629
Rep 7,869
Posts
Drives: C63 AMG & 280 SL on Weekends :
Join Date: May 2010
Location: GTA, Ontario - Canada
iTrader: (0)
Garage List 1969 Restored Merce ... [7.50]
2011 M3 Coupe TRADED [7.34] 1987 BMW 535is [1.00] Cars from the Past [6.50] The ///M3 Engine S65 [9.59] |
Would have expected some nicer up to date drawings for this presentation ... If one of my designers would come up with this simple building block I would have fired him, since every computer in a design department should have SutoCad installed .... Gosh
__________________
Cheers, Rolf-Dieter
Life will take us to some interesting places, fortunately The ///M3 will too with a many of us know this very well, now my C6.3 AMG with 487 HP does it too ---> Click here for some good stuff I found |
Appreciate
0
|
10-31-2011, 06:51 PM | #19 |
Colonel
113
Rep 2,855
Posts
Drives: 2011 335is E93
Join Date: Aug 2011
Location: Ontario
|
This will be the new "HPFP" issue, but for the M3's. Can you imagine the headache if this isn't properly test run for years. And it'll cost an arm and leg when it's new, will probably drag up the price for a new M3. I just hope that proper testing is done before they release these cars on the road and another 335i happens.
|
Appreciate
0
|
10-31-2011, 06:57 PM | #20 | |
Major
39
Rep 1,118
Posts |
Quote:
if its very detailed someone can come in and do the same style turbo but different motor or bigger shaft and get away with it. This way BMW can just say that was our idea u cant use it |
|
Appreciate
0
|
10-31-2011, 08:10 PM | #21 |
Colonel
69
Rep 2,352
Posts
Drives: IS 300
Join Date: Mar 2010
Location: Bradenton FL
|
Thats probably why they never work...
__________________
--------------------------------------------------------------
"Speed never killed anyone its very important to get that straight, Speed has never killed a soul. Suddenly becoming stationary thats what gets people." - Jeremy Clarkson |
Appreciate
0
|
10-31-2011, 08:14 PM | #22 |
Second Lieutenant
5
Rep 217
Posts |
This system sounds awesome for maximizing power and efficiency, which is right up BMW's alley these days. The first thing I think of is KERS from F1 with the energy recovering wastegate replacement.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|