European Auto Source (EAS)
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > Wheels | Tires -- Sponsored by The Tire Rack

Post Reply
 
Thread Tools Search this Thread
      05-22-2021, 05:57 PM   #1211
TopJimmy
Major General
TopJimmy's Avatar
United_States
5394
Rep
5,123
Posts

Drives: 2023 M3 Comp xDrive
Join Date: Jul 2019
Location: Chester County, PA

iTrader: (5)

Today I picked up my SV107s (19x9.5 and 11.5) fitted with Toyo Proxies in 265/35 and 325/30. Yes the massive meats fit and I've only heard one rub on a deep dip. I can always raise up the MP-HAS a little if needed, but this is the same height where I ran my 305 RE71Rs. Since I drag race my F80 I'm not going to camber and tuck. I'm good with my "fat ass" look.

PS: I found the little spot that rubbed the one time, it's the rear bumper cover (inside the pointy end at 2 o'clock position on the rear wheel in the pic). On one side there was some extra plastic that stuck out inside that point and now it's buffed flat. The tire is fine, and the rub hasn't returned. I even fueled up (E) plus five more 5gal pails in the trunk, to add some weight. These fatties fit!
Attached Images
       
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
Appreciate 6
VeloF1318.00
sly1types426.50
AlterZgo1537.50
Shadow2121.00
AND1_M369.00
      05-29-2021, 10:27 AM   #1212
coibeo2610
A BMW Enthusiast
United_States
4
Rep
189
Posts

Drives: BMW F07 5GT
Join Date: Mar 2013
Location: Garden Grove

iTrader: (0)

Quote:
Originally Posted by Signature Wheel BMW View Post
Signature Precision Series SV705
Sahara Brushed Sand with Optional Diamond Cut
Centerlock made for a Lamborghini Huracan Performante
Hi Jimmy, do you happen to have some a set of diamond cut with brushed grey or brushed dark? I'm imagining how they would look.
Appreciate 0
      05-30-2021, 07:40 PM   #1213
romeoc021291
New Member
romeoc021291's Avatar
0
Rep
8
Posts

Drives: BMW M4
Join Date: Apr 2021
Location: Philippines

iTrader: (0)

Quote:
Originally Posted by RevNev View Post
SV104's (bright silver) 19x9.5 ET20 and 19x11.5 ET45 with 265/35 and 315/30 Cup 2's.
Re your setup with 265F and 315R, do your tires rub? Do you use spacers? Also, is your car lowered?
Appreciate 0
      06-03-2021, 03:44 PM   #1214
AND1_M3
Second Lieutenant
United_States
69
Rep
236
Posts

Drives: 2018 M3 Comp
Join Date: Jun 2020
Location: FLORIDA

iTrader: (0)

Quote:
Originally Posted by TopJimmy View Post
Today I picked up my SV107s (19x9.5 and 11.5) fitted with Toyo Proxies in 265/35 and 325/30. Yes the massive meats fit and I've only heard one rub on a deep dip. I can always raise up the MP-HAS a little if needed, but this is the same height where I ran my 305 RE71Rs. Since I drag race my F80 I'm not going to camber and tuck. I'm good with my "fat ass" look.

PS: I found the little spot that rubbed the one time, it's the rear bumper cover (inside the pointy end at 2 o'clock position on the rear wheel in the pic). On one side there was some extra plastic that stuck out inside that point and now it's buffed flat. The tire is fine, and the rub hasn't returned. I even fueled up (E) plus five more 5gal pails in the trunk, to add some weight. These fatties fit!
Bro they look feen sweet and thick. you managed to get 325 under that ass. lol
Appreciate 1
TopJimmy5394.00
      06-04-2021, 04:21 PM   #1215
StockM4
Lieutenant
No_Country
169
Rep
441
Posts

Drives: BMW M3
Join Date: Mar 2021
Location: new york

iTrader: (1)

Whats ur rear offset?
Appreciate 0
      06-06-2021, 08:48 PM   #1216
TopJimmy
Major General
TopJimmy's Avatar
United_States
5394
Rep
5,123
Posts

Drives: 2023 M3 Comp xDrive
Join Date: Jul 2019
Location: Chester County, PA

iTrader: (5)

Quote:
Originally Posted by StockM4 View Post
Whats ur rear offset?
Mine are 19x11.5ET45
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
Appreciate 0
      06-07-2021, 03:57 AM   #1217
horsepower_and_hounds
Brigadier General
1836
Rep
4,204
Posts

Drives: BMW
Join Date: Aug 2012
Location: USA

iTrader: (9)

Nice shoes Jimmy, what are they....like it all murdered out
Appreciate 0
      06-07-2021, 04:10 AM   #1218
Weytens
Private
33
Rep
55
Posts

Drives: M4
Join Date: Mar 2021
Location: Belgium

iTrader: (0)

Where can I buy Signature wheels in Europe?
Appreciate 0
      06-14-2021, 05:22 PM   #1219
VeloF1
Second Lieutenant
VeloF1's Avatar
318
Rep
280
Posts

Drives: F82, 996 Turbo S, E46 & E36
Join Date: Oct 2015
Location: Sacramento, CA

iTrader: (0)

Garage List
2015 M4  [0.00]
New SV504 Track wheels

Big thanks to Jimmy for delivery these quality track specific wheels in under 6 weeks, including my specific specs. A little dirty from a few runs at Thunderhill, CA 5 mile. Yet, super solid, and, fairly light weight for track wheels. Front:18x10 ET20. Rear:18x11 ET43
Attached Images
 
__________________
IG @velof1
Appreciate 6
      06-15-2021, 10:20 AM   #1220
blkcow
Private First Class
58
Rep
186
Posts

Drives: BMW X3MC LCI
Join Date: Jul 2019
Location: South Orange County

iTrader: (0)

Garage List
Dumb question - is there a particular wheel roundel size that works with all Signature wheels or is it specific to each wheel? I got some SV101s and I wanted to add the BMW wheel roundels on them but I wasn't sure what size to get.
Appreciate 0
      06-15-2021, 02:19 PM   #1221
TopJimmy
Major General
TopJimmy's Avatar
United_States
5394
Rep
5,123
Posts

Drives: 2023 M3 Comp xDrive
Join Date: Jul 2019
Location: Chester County, PA

iTrader: (5)

Quote:
Originally Posted by blkcow11291 View Post
Dumb question - is there a particular wheel roundel size that works with all Signature wheels or is it specific to each wheel? I got some SV101s and I wanted to add the BMW wheel roundels on them but I wasn't sure what size to get.
When I purchased my SV107s there was the option for Custom Milled Centers so my OEM roundel caps would fit (and no S caps come with the wheels). If I picked Standard then I would get the Signature center caps but no OEM roundels would fit. Maybe it's the same with yours...
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
Appreciate 0
      06-25-2021, 10:42 AM   #1222
Thekidhodges
Enlisted Member
No_Country
179
Rep
45
Posts

Drives: 2018 Bmw M3
Join Date: Jun 2021
Location: Los Angeles

iTrader: (0)

Quote:
Originally Posted by TopJimmy View Post
Today I picked up my SV107s (19x9.5 and 11.5) fitted with Toyo Proxies in 265/35 and 325/30. Yes the massive meats fit and I've only heard one rub on a deep dip. I can always raise up the MP-HAS a little if needed, but this is the same height where I ran my 305 RE71Rs. Since I drag race my F80 I'm not going to camber and tuck. I'm good with my "fat ass" look.

PS: I found the little spot that rubbed the one time, it's the rear bumper cover (inside the pointy end at 2 o'clock position on the rear wheel in the pic). On one side there was some extra plastic that stuck out inside that point and now it's buffed flat. The tire is fine, and the rub hasn't returned. I even fueled up (E) plus five more 5gal pails in the trunk, to add some weight. These fatties fit!
Man never thought about doing a meaty set up on the f80 but I think you just changed my mind haha
Appreciate 1
TopJimmy5394.00
      07-09-2021, 05:34 PM   #1223
AND1_M3
Second Lieutenant
United_States
69
Rep
236
Posts

Drives: 2018 M3 Comp
Join Date: Jun 2020
Location: FLORIDA

iTrader: (0)

Sv104 m3 fitment

Big thanks to Jimmy at Signature wheels. Can't wait to install these on my Sakhir M3.
Attached Images
 
Appreciate 3
      07-17-2021, 08:12 AM   #1224
AND1_M3
Second Lieutenant
United_States
69
Rep
236
Posts

Drives: 2018 M3 Comp
Join Date: Jun 2020
Location: FLORIDA

iTrader: (0)

SV104

Finally got them on the SAKHIR M3...
Attached Images
 
Appreciate 7
      07-17-2021, 02:05 PM   #1225
OH IT'S KINO
New Member
12
Rep
13
Posts

Drives: F80 M3/GS350F/F350SD
Join Date: Jan 2018
Location: Mid-Atlantic

iTrader: (0)

Got a set on the way!

SV702's in Brushed Smoke Tint
19x9.5 ET18 | 19x11.5 ET 43
Attached Images
 
Appreciate 5
      08-10-2021, 05:12 PM   #1226
x.shell
▆ ✚✚   ▆▆▆▆▆▆
x.shell's Avatar
6577
Rep
5,304
Posts

Drives: ▋ ▉▉
Join Date: Nov 2012
Location:  ▆▆▆ ▆▆▆ ▆

iTrader: (3)

More SV601





Appreciate 6
      10-06-2021, 07:47 PM   #1227
FAM3LYCAR
Enlisted Member
FAM3LYCAR's Avatar
United_States
78
Rep
41
Posts

Drives: Tanzanite F80-6MT
Join Date: May 2019
Location: Virginia

iTrader: (1)

Garage List
2016 M3  [0.00]
Just came back here to say how awesome these wheels are after having them on for most of the year. I might go back to stock 437s in a few weeks for the 2.3 months of winter we have here in Virginia, but I couldn't be happier with my Signature wheels. They've been easy to keep clean, stylish, and look way better in person than in photos. Just detailed the car last weekend, and love how they look in natural light.
Attached Images
 
Appreciate 7
Shadow2121.00
RSXDC5704.00
f80tanz233.50
AND1_M369.00
Belong560.00
///MPhatic13544.50
      10-07-2021, 09:49 PM   #1228
RSXDC5
Captain
RSXDC5's Avatar
704
Rep
886
Posts

Drives: M3
Join Date: Sep 2012
Location: Scottsdale, AZ

iTrader: (0)

Loving my Signature SV103 after 4yrs!

Rears pictured; 19x11.5 +44 with a 325/30/19

😎
Attached Images
 
__________________
2015 M3 - AW 6Spd w/ CCB
MCS 2WR Dampers, Spec Twin Disk Clutch, MaxPSI CH, F80Paul Ethanol Tune, 3.5in DPs
Appreciate 6
TopJimmy5394.00
AND1_M369.00
AlterZgo1537.50
x.shell6576.50
sly1types426.50
      12-30-2021, 09:34 AM   #1229
Signature Wheel BMW
Major
Signature Wheel BMW's Avatar
United_States
1103
Rep
1,083
Posts

Drives: Signature BMW
Join Date: Sep 2016
Location: IG: signature_bmw

iTrader: (0)

Sahara Brushed Sand

A close up look at Sahara Brushed Sand finish.
Attached Images
   
__________________
Jimmy | BMW Addict | Signature Performance Wheels | OBSESSED WITH PERFECTION | IG: Signature_BMW | Email: jimmy@signaturewheel.com
Appreciate 1
AND1_M369.00
      02-16-2022, 04:22 PM   #1230
Signature Wheel BMW
Major
Signature Wheel BMW's Avatar
United_States
1103
Rep
1,083
Posts

Drives: Signature BMW
Join Date: Sep 2016
Location: IG: signature_bmw

iTrader: (0)

Signature SV107

Signature SV107 in Brushed Aluminum


Proud Owner's IG: https://www.instagram.com/yaadman_f80/
Attached Images
 
Appreciate 1
TopJimmy5394.00
      03-01-2022, 06:45 PM   #1231
armo
Private
armo's Avatar
United_States
60
Rep
51
Posts

Drives: 2015 M3
Join Date: Mar 2020
Location: NJ

iTrader: (0)

I'm lowered on Ohlins suspension (not slammed). Stock camber plates. What offsets and size would work? Would spacers be necessary ?

A buddy of mine let me trial fit one of his wheels for fitment. The tire rubbed on the front coilover. Spec on the wheel was 19x9.5 et23 w a 265 tire.

Any assistance would be appreciated.
__________________
2015 M3 - Carbahn Stage 1 - Ohlins R&T - Apex VS-5RS - Gintani Crankhub

Last edited by armo; 03-02-2022 at 01:51 AM..
Appreciate 0
      03-06-2022, 05:19 AM   #1232
Stefan88
New Member
Stefan88's Avatar
United Kingdom
42
Rep
10
Posts

Drives: F80 m3 cp
Join Date: Mar 2022
Location: Nottingham, England

iTrader: (0)

Garage List
2017 bmw f80 m3  [0.00]
Hi guys. I'm new to the forum,
I've been reading through the thread and absolutely love the svt104 wheels
Can i get some advice please.
I'm looking at
Front 20" 10j et24. 265/30/20
Rear 20" 10.5j et30 285/30/20
On eibach springs.
Will these fit OK without any rubbing issues etc. Thank you in advance. Looking forward to being part of the forum from the UK

Stefan.
Attached Images
  
Appreciate 0
Post Reply

Bookmarks

Tags
f80 wheel, f82 wheel, forged wheels, signature movement, signature wheel

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:48 AM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST