DIY: F8x M3/M4 Brembo ///M M2C 2NH OEM BBK full install

[E46M3forRay]

This would probably also apply to the Brembo GT, Stoptech, AP Racing, etc. as a baseline BBK guide.

[erik_m3g80]

Nice video. But i dont like the way to cut the Dust shields on the rear that much. I used the bigger one which are requiered for the BBK. Its a little bit more work to remove the old shields but at the end of the day its the better way.

Anyway, nice DIY

[jlp429]

Awesome job man. Where did you order the brakes from?

[E46M3forRay]

Originally Posted by jlp429

Awesome job man. Where did you order the brakes from?

Got it from a member in here that replaced it with an AP racing.

There’s a few bmw vendors that sells the Perf kit in red.

Just Google search this. Same as the gray M2c
BMW M PERFORMANCE M SPORT RETROFIT BRAKE KIT - RED - BMW (34-11-2-462-268)

[Mospeada]

Originally Posted by E46M3forRay

Got it from a member in here that replaced it with an AP racing.

There’s a few bmw vendors that sells the Perf kit in red.

Just Google search this. Same as the gray M2c
BMW M PERFORMANCE M SPORT RETROFIT BRAKE KIT - RED - BMW (34-11-2-462-268)

yes that red BBK kit will come with bigger dust shield, pads, rotors, etc. it's a pretty good deal. very tight fit to the rim though

[E46M3forRay]

Originally Posted by Mospeada

yes that red BBK kit will come with bigger dust shield, pads, rotors, etc. it's a pretty good deal. very tight fit to the rim though

They’re the same red ones that are now found on the M2 CS.