01-08-2021, 05:47 PM | #1 |
Private First Class
139
Rep 166
Posts |
Dumb question of the day...
I just picked up a set of silver 666M wheels for my 2016 F80, non-ZCP. I currently have 19" 437M wheels, Is it OK to run my stock non-ZCP springs with the 20" 666M wheels? BTW no wonder why they are called 666 wheels, I can tell there going to be a devil to keep clean so I just ordered a set of Akebono Ceramic brake pads to minimize brake dust. As always, I appreciate your advice Bimmerpost fam! Matt |
01-08-2021, 08:04 PM | #2 |
Second Lieutenant
235
Rep 200
Posts |
You should be fine running OEM 666s with your 2016 F80 on stock springs. I have the Akebono pads on my ride and it literally takes me weeks to see any dust on my wheels. They were a good investment.
MB |
Appreciate
2
///MB ///M3138.50 Gunzy79.50 |
01-08-2021, 08:37 PM | #3 |
Private First Class
139
Rep 166
Posts |
Thank you! So excited to get these wheels and brake pads installed! Won't be until spring though...
|
Appreciate
0
|
01-09-2021, 08:31 AM | #4 |
Lieutenant Colonel
775
Rep 1,751
Posts |
I had 666s on my nonZcp f80. No issues at all. Enjoy
|
Appreciate
1
///MB ///M3138.50 |
01-13-2021, 03:59 PM | #7 | |
Lieutenant Colonel
775
Rep 1,751
Posts |
Quote:
Here’s something I found on the suspension sticky OEM spring rates for the F80/F82 is 185 lb/in Front, 575 lb/in Rear OEM COMPETITION PACK spring rates for the F80/F82 is 198 lbs/in Front, 685 lbs/in Rear |
|
Appreciate
1
_Timm334.00 |
Post Reply |
Bookmarks |
|
|