09-22-2021, 06:37 PM | #2 |
Captain
956
Rep 624
Posts |
5 step process:
1. Buy a quality replica brand lip as the lip will be inevitably damaged/destroyed eventually 2. Apply 3M double-sided tape to underside of bumper 3. Position lip as desired using 3M tape to hold in place 4. Drill pilot holes for 5 self-taping screws spaced out across lip somewhat evenly while lip is held in place by tape 5. Screw lip in place with washers, tightening the lip firmly but not so tight as to crack the lip That is the only way. Watch out for roadkill. |
Appreciate
1
FrankMstein1019.50 |
09-23-2021, 09:21 AM | #3 | |
BimmerPost Supporting Vendor
24191
Rep 190,805
Posts |
Quote:
+1
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
|
Appreciate
1
FrankMstein1019.50 |
Post Reply |
Bookmarks |
|
|