F8X M3/M4 Macht Schnell wheel spacer reference thread

[Sivart321]

Originally Posted by Nate@IND

Did the support team take care of you? If not, let me know and we will get a new set shipped out. Sorry for the trouble.

Yeah, new ones packaged awesomely. Car looks great now! Thanks!

[dfwf80]

Does anyone know if spacers from f30 335i will fit 16 m3?
Thanks

[kevin @ eas]

Originally Posted by dfwf30

Does anyone know if spacers from f30 335i will fit 16 m3?
Thanks

They will work on an f80 as well. Same diameter and bolt sizes.

[dfwf80]

Ty

[M3ANOXGREEN]

20x8.5 et35 and 20x10.5 et40
what size spacer should i run up front? I am on H&R supersports.
also could you reccomend a tire size for these?

[nets52791]

does anyone have an m4 with 12mm all around and another m4 with 12mm-F 15mm-R

[kevin @ eas]

Originally Posted by M3ANOXGREEN

20x8.5 et35 and 20x10.5 et40
what size spacer should i run up front? I am on H&R supersports.
also could you reccomend a tire size for these?

The front offset is kind of weak I would go about a 20mm up front. Thats the largest we have. Rear you dont need as large, I would do a 10mm rear. Tires for the front cant go too wide since you have an 8.5, a 255 would be sufficient., Rear you can go with a 295.

[M3ANOXGREEN]

Originally Posted by kevin @ eas

The front offset is kind of weak I would go about a 20mm up front. Thats the largest we have. Rear you dont need as large, I would do a 10mm rear. Tires for the front cant go too wide since you have an 8.5, a 255 would be sufficient., Rear you can go with a 295.

Thanks kevin!!!

[M3ANOXGREEN]

Originally Posted by kevin @ eas

The front offset is kind of weak I would go about a 20mm up front. Thats the largest we have. Rear you dont need as large, I would do a 10mm rear. Tires for the front cant go too wide since you have an 8.5, a 255 would be sufficient., Rear you can go with a 295.

what profile should i look for for the tire? 30 all the way around?

[M4 LF]

Originally Posted by biggripper

I have an M4 (arriving soon) with the 19" wheels. No plans to lower the car. I went with 12/12. I wanted to push the wheels out but not too far. Plus I was afraid if I pushed my fronts out too far I might increase risk for rock chips.

I should be good to go with this setup right?

Originally Posted by tom @ eas

If going 18mm front, should go with 15mm rear to balance out. This setup will only work with non-lowered cars as it's a bit aggressive for lowered vehicles.

Any feedbacks on whether running spacers would pickup more dirt, road debris or paint damage to the side and rear panels? I like the look but rather not deal with the extra mess. Thanks.

[kevin @ eas]

Originally Posted by M3ANOXGREEN

what profile should i look for for the tire? 30 all the way around?

Correct the 30 profile all around is good on your 20's

[kevin @ eas]

Originally Posted by M4 LF

Any feedbacks on whether running spacers would pickup more dirt, road debris or paint damage to the side and rear panels? I like the look but rather not deal with the extra mess. Thanks.

As long as you dont push the wheels out super aggressively you wont have any issues with paint damage or road debris. We didnt have any issues on our car when we had the spacer setup.

[M4 LF]

Originally Posted by kevin @ eas

As long as you dont push the wheels out super aggressively you wont have any issues with paint damage or road debris. We didnt have any issues on our car when we had the spacer setup.

When you say aggressive, are you referring to 18F/15R or more? Or is that still considered conservative? And this is on stock suspension/ wheels.

[JSBhopal]

Year/model BMW
2015 M3

Wheels/offset
Front: (ie: 19 x 9.0 Style 437M, ET29)
Rear: (ie: 19 x 10.0 Style 437M, ET40)

Tire size
Front: Michelin Pilot Super Sport 255/35-19
Rear: Michelin Pilot Super Sport 275/35-19

Suspension
Adaptive M Suspension, Stock springs

Spacer size
Front: 15mm
Rear: 15mm

Before:


After:


Before:


After:


A huge thanks to @kevin@eas ! Would highly recommend. No issue with rubbing etc so far.

[kevin @ eas]

Originally Posted by JSBhopal

Year/model BMW
2015 M3

Wheels/offset
Front: (ie: 19 x 9.0 Style 437M, ET29)
Rear: (ie: 19 x 10.0 Style 437M, ET40)

Tire size
Front: Michelin Pilot Super Sport 255/35-19
Rear: Michelin Pilot Super Sport 275/35-19

Suspension
Adaptive M Suspension, Stock springs

Spacer size
Front: 15mm
Rear: 15mm

Before:


After:


Before:


After:


A huge thanks to @kevin@eas ! Would highly recommend. No issue with rubbing etc so far.

Car definitely looks great! Crazy how much spacers change the overall look of the car.

[manticor]

Originally Posted by kevin @ eas

Car definitely looks great! Crazy how much spacers change the overall look of the car.

ok so after seeing the front poke out in that pic with 15mm im glad i waited to buy these till my car arrives at the end of the month... waaay too much sticking out for me, i want flush but absolutely no poke. So 12/12 it shall be for me and when I lower it on US eibachs if they ever are made or swifts ill consider going to 15mm then if the 1" drop affects things much... thanks to JSBhopal for the pics.

[S65V8]

are the spacer plates themselves identical between E92 and F8x? The only difference are the bolts?

[firedown31]

Originally Posted by manticor

ok so after seeing the front poke out in that pic with 15mm im glad i waited to buy these till my car arrives at the end of the month... waaay too much sticking out for me, i want flush but absolutely no poke. So 12/12 it shall be for me and when I lower it on US eibachs if they ever are made or swifts ill consider going to 15mm then if the 1" drop affects things much... thanks to JSBhopal for the pics.

Right there with you. 15f/12r seemed to be the way to go but after seeing JSBhopal's front end I agree with 12/12.

[kevin @ eas]

Originally Posted by SROC5

are the spacer plates themselves identical between E92 and F8x? The only difference are the bolts?

Correct the spacers are the same, just the bolts changed from 12x1.5 to a 14x1.25 thread pitch

[G4BR13L]

Anybody care to share pics with 12/12 ?

[TRKY]

This is 12/12 and lowered with KW Has

[XenaBimmer]

12/12 looks good!