Help coding off side markers in Xenons

[tavio1227]

Hello I want to code off the side markers on my f80 I have the E-Sys program but the launcher won't work. Anyone can help me out? Thank you

[kubax86]

Can help via TV. Pm me

[backagain]

Originally Posted by tavio1227

Hello I want to code off the side markers on my f80 I have the E-Sys program but the launcher won't work. Anyone can help me out? Thank you

The launcher expired at the end of 2018. You'll need the re-arm program, https://f30.bimmerpost.com/forums/sh....php?t=1457494. Pretty straight forward.

Good luck.

[tavio1227]

Originally Posted by backagain

The launcher expired at the end of 2018. You'll need the re-arm program, https://f30.bimmerpost.com/forums/sh....php?t=1457494. Pretty straight forward.

Good luck.

Thank you sir, now I'm getting an error after the launcher (connection to e-sys launcher failed. Restart and try again) but e-sys program still open but can't connect with the car it won't let me hit the connect bottom

[backagain]

Originally Posted by tavio1227

Thank you sir, now I'm getting an error after the launcher (connection to e-sys launcher failed. Restart and try again) but e-sys program still open but can't connect with the car it won't let me hit the connect bottom

Without re-arming and adjusting the date, can you connect to the vehicle and get the VIN?


If the launcher is working properly, you should be able to start the program; connect to the vehicle; read the FDL file; but can't edit the FDL file because it will ask for the token repeatedly. This is where the re-arm program is needed. So make sure you launcher is working properly.