Anyone running Ferodo 3.12 on standard rotors and calipers?

mynameisplayer · 02-27-2021, 02:43 PM

I know a lot run them on BBK, but they do make them in the factory shape pad. It is intended for track use, with GT4 cooling. Have come from RSL29, these seem like the next step?

HA55L3R · 03-16-2021, 09:56 AM

I just started using them at the end of last season, they're definitely better than RSL29's. Better initial bite and modulation and they hold up better under high temps

swagon · 03-16-2021, 01:37 PM

FWIW, I have DS1.11 and they behave well on stock rotors even on the street. Cannot compare them to Pagids, though.

stevehifi · 03-17-2021, 12:06 AM

They don't make 3.12 for factory calipers. You can get ds1.11 for track and they are not bad if you don't want to spend money on BBK. very noisy on street.

mynameisplayer · 03-17-2021, 02:30 AM

Quote:

Originally Posted by stevehifi

They don't make 3.12 for factory calipers. You can get ds1.11 for track and they are not bad if you don't want to spend money on BBK. very noisy on street.

They do, and they should be here soon.
https://ecat.ferodoracing.com/produc...s/code/FCP4611
I'm going to run DBA 5000 T3
https://dba.com.au/products/products...ors/hd-5000xs/
Cooling ducts are being constructed to mimic M4GT3. Just need to find a cheap bumper insert, or I'll 3d print a mold, and then make my own with pre-preg cf.

mynameisplayer · 03-26-2021, 05:29 AM

Rotors arrived, pads soon I hope

02-27-2021, 02:43 PM	#1
mynameisplayer SCHNELL 225 Rep 835 Posts Drives: F15 50i, E46, E90, Crafter van Join Date: May 2016 Location: Australia iTrader: (0)	Anyone running Ferodo 3.12 on standard rotors and calipers? I know a lot run them on BBK, but they do make them in the factory shape pad. It is intended for track use, with GT4 cooling. Have come from RSL29, these seem like the next step?
	Appreciate 0 Tweet Quote

03-16-2021, 09:56 AM	#2
HA55L3R Private First Class 53 Rep 104 Posts Drives: 15' M4 Join Date: Jan 2018 Location: Boston, MA iTrader: (0)	I just started using them at the end of last season, they're definitely better than RSL29's. Better initial bite and modulation and they hold up better under high temps
	Appreciate 0 Quote

03-16-2021, 01:37 PM	#3
swagon Major General 13518 Rep 8,163 Posts Drives: F80 6MT Join Date: Jun 2013 Location: . iTrader: (0)	FWIW, I have DS1.11 and they behave well on stock rotors even on the street. Cannot compare them to Pagids, though. __________________
	Appreciate 0 Quote

03-17-2021, 12:06 AM	#4
stevehifi Captain 527 Rep 855 Posts Drives: 17 F80 M3 ZCP Join Date: May 2008 Location: Irvine,CA iTrader: (5)	They don't make 3.12 for factory calipers. You can get ds1.11 for track and they are not bad if you don't want to spend money on BBK. very noisy on street.
	Appreciate 0 Quote

03-26-2021, 05:29 AM	#6
mynameisplayer SCHNELL 225 Rep 835 Posts Drives: F15 50i, E46, E90, Crafter van Join Date: May 2016 Location: Australia iTrader: (0)	Rotors arrived, pads soon I hope Attached Images
	Appreciate 0 Quote