F80 Intrax lowering springs

[Ade_7]

Hi Everyone.

I've been offered a very good price on a set of these but cannot find any reference or images about them?!

They list a 25mm drop front and rear which sounds like it will be too much for the back end IMHO but without pictures etc it's difficult to be sure.

So has anyone got a set?
Know someone that has?
Got some pictures ideally?
Got any feedback about the ride etc?

I know the company have a good reputation but it's currently a bit too much of a stab in the dark for my tastes....

Ade

[Wills2]

Can't help you with Intrax as I've never heard of them, the drop seems OK if a little aggressive on the back especially as you're running 15mm spacers back there

Look at this thread it references all the major suppliers and drops.

http://f80.bimmerpost.com/forums/sho....php?t=1143161

In fact looking at the thread 25mm on the rear for the F80 looks very low, personally I'd fit the ACS springs for piece of mind they're not expensive but a quality product and you don't want to take risks with such a lovely car.

[Ade_7]

Originally Posted by Wills2

Can't help you with Intrax as I've never heard of them, the drop seems OK if a little aggressive on the back especially as you're running 15mm spacers back there

Look at this thread it references all the major suppliers and drops.

http://f80.bimmerpost.com/forums/sho....php?t=1143161

In fact looking at the thread 25mm on the rear for the F80 looks very low, personally I'd fit the ACS springs for piece of mind they're not expensive but a quality product and you don't want to take risks with such a lovely car.

Thanks, I've read all of those at least a few times

I was pretty much decided between ACS or Macht Schnell and was talking to a company who sell the later and they mentioned Intrax and the cost was very reasonable but although the I've heard of the company I've heard nothing of them on this platform. Hence my question

[Wills2]

I'd probably go the tried, tested and recommended route then.