BMW M4 GT Edition

[Gurucollector]

Hey guys,
Figured that I would make a thread of my build alongside the modifications since the car has gone through quite a number of stuff since my post back in 2020.

Current Modifications :
- GotTuned Stage 3 Turbos (700+)
- AEM Electronics Water Methanol
- VRSF Catless Downpipes
- VRSF High Flow Intakes
- VRSF Charge Air Cooler
- VRSF Heat Exchanger
- VRSF Single Midpipe
- BMS J Pipe with Blow Off Valve
- BMS Billet Exhaust Tips
- BMS Methanol Stealth Tank
- FTP Turbo Inlets
- VTT Spline Lock CrankHub
- VTT Crank Bolt Capture
- ARM Motorsport Chargepipes
- Stage 3 Custom Tune ( around 700ish HP )
- XHP Stage 3 Transmission
- Maverick Forged 2 Piece Rims
- Hacks Engineering Oil Thermostat

- XPEL Ceramic Window Tint
- XPEL Paint Protection Film
- XPEL Ceramic Coating
- XPEL Headlight PPF

Bodykit
- PSM Dynamic Diffuser
- GTS Spoiler
- PSM Dynamic Side Skirt
- M Performance Carbon Shrouds
- Custom Carbon GT4 Canards
- Varis Carbon Front Lip

Currently finishing off my performance mods then will be working on suspension modifications ( waited to do this last as the roads here are terrible so static fitment will not be suitable since front lips aren't cheap, looking at getting an air cup setup done )

Hope you like the build !

Follow me on Instagram ( 24,600 Followers )
www.instagram.com/gurucollector

Follow me on TikTok ( 322,000 Followers )
www.tiktok.com/@Gurucollector

P.S : I like the wrap job and it's MY car so no point commenting " take off the wrap " or " ugly wrap " .. lol I know some people love hating on it.

[bigj505]

I actually like the wrap. Beautiful car.

[65fastback]

Thats a very serious car. I am sure I would get laughed at driving something like that around seattle but...I like it... a lot.
Way over the top for a street car but hard not to appreciate it. its a great look around a palm tree type climate.

[M5D]

Beautiful cars! Don’t mind the haters , it is all penis envy! Love love it!

[Gurucollector]

Originally Posted by 65fastback

Thats a very serious car. I am sure I would get laughed at driving something like that around seattle but...I like it... a lot.
Way over the top for a street car but hard not to appreciate it. its a great look around a palm tree type climate.

It's a very fun car. I do content creating thus why the wrap. More of a weekend / content creating car

[Suds]

Looks Hot!
Keep on posting as you build on.

Originally Posted by Gurucollector

It's a very fun car. I do content creating thus why the wrap. More of a weekend / content creating car

[Jbrown7403]

That is quite the build! Good stuff on your IG and I’m curious about the back story on the Martini Porsche 911 in one of your posts (I’m a sucker for the Martini Racing livery….best in all of motorsports, IMO).

[Gurucollector]

Originally Posted by Jbrown7403

That is quite the build! Good stuff on your IG and I’m curious about the back story on the Martini Porsche 911 in one of your posts (I’m a sucker for the Martini Racing livery….best in all of motorsports, IMO).

Agreed ! That livery is one of my favourites. That however is not my personal car and it is in the Porsche Showroom for Display so I wouldn't be able to provide a proper backstory on the build. Sorry !!

[Gurucollector]

Originally Posted by M5D

Beautiful cars! Don’t mind the haters , it is all penis envy! Love love it!

is there a reason why you kept one airbox and not the other ? I run my setup with both airboxes. They aren't fitting in the photo as they are being hydrodipped in forged carbon. I couldn't stand the dull black plastic look hahaha.

[M5D]

Originally Posted by Gurucollector

is there a reason why you kept one airbox and not the other ? I run my setup with both airboxes. They aren't fitting in the photo as they are being hydrodipped in forged carbon. I couldn't stand the dull black plastic look hahaha.

They are both in, but the other side I had to modify a bit so the intake and filter would fit. Forged carbon would look better!

[msiegel117]

Originally Posted by Gurucollector

Hey guys,
Figured that I would make a thread of my build alongside the modifications since the car has gone through quite a number of stuff since my post back in 2020.

Current Modifications :
- GotTuned Stage 3 Turbos (700+)
- AEM Electronics Water Methanol
- VRSF Catless Downpipes
- VRSF High Flow Intakes
- VRSF Charge Air Cooler
- VRSF Heat Exchanger
- VRSF Single Midpipe
- BMS J Pipe with Blow Off Valve
- FTP Turbo Inlets
- VTT Spline Lock CrankHub
- VTT Crank Bolt Capture
- ARM Motorsport Chargepipes
- Stage 3 Custom Tune ( around 700ish HP )
- XHP Stage 3 Transmission
- Maverick Forged 2 Piece Rims
- XPEL Paint Protection Film
- XPEL Ceramic Coating
- XPEL Headlight PPF

Bodykit
- PSM Dynamic Diffuser
- GTS Spoiler
- PSM Dynamic Side Skirt
- M Performance Carbon Shrouds
- Custom Carbon GT4 Canards
- Varis Carbon Front Lip

Currently finishing off my performance mods then will be working on suspension modifications ( waited to do this last as the roads here are terrible so static fitment will not be suitable since front lips aren't cheap, looking at getting an air cup setup done )

Hope you like the build !

Follow me on Instagram ( 24,600 Followers )
www.instagram.com/gurucollector

Follow me on TikTok ( 322,000 Followers )
www.tiktok.com/@Gurucollector

P.S : I like the wrap job and it's MY car so no point commenting " take off the wrap " or " ugly wrap " .. lol I know some people love hating on it.

Bro - LOVE THAT WRAP. Very cool and different!

[khoa@x-ph.com]

Great build! The wrap is on point.

[HotRodM4]

😍

[spidy512]

Great looking car!

Ignore the haters...

josh

[AR_Motorwerkz]

Originally Posted by Gurucollector

Hey guys,
Figured that I would make a thread of my build alongside the modifications since the car has gone through quite a number of stuff since my post back in 2020.

Current Modifications :
- GotTuned Stage 3 Turbos (700+)
- AEM Electronics Water Methanol
- VRSF Catless Downpipes
- VRSF High Flow Intakes
- VRSF Charge Air Cooler
- VRSF Heat Exchanger
- VRSF Single Midpipe
- BMS J Pipe with Blow Off Valve
- FTP Turbo Inlets
- VTT Spline Lock CrankHub
- VTT Crank Bolt Capture
- ARM Motorsport Chargepipes
- Stage 3 Custom Tune ( around 700ish HP )
- XHP Stage 3 Transmission
- Maverick Forged 2 Piece Rims
- XPEL Paint Protection Film
- XPEL Ceramic Coating
- XPEL Headlight PPF

Bodykit
- PSM Dynamic Diffuser
- GTS Spoiler
- PSM Dynamic Side Skirt
- M Performance Carbon Shrouds
- Custom Carbon GT4 Canards
- Varis Carbon Front Lip

Currently finishing off my performance mods then will be working on suspension modifications ( waited to do this last as the roads here are terrible so static fitment will not be suitable since front lips aren't cheap, looking at getting an air cup setup done )

Hope you like the build !

Follow me on Instagram ( 24,600 Followers )
www.instagram.com/gurucollector

Follow me on TikTok ( 322,000 Followers )
www.tiktok.com/@Gurucollector

P.S : I like the wrap job and it's MY car so no point commenting " take off the wrap " or " ugly wrap " .. lol I know some people love hating on it.

Nice wrap! Diggin the DTM vibe!

[RoccoMarcellus]

Sick Build 👌🏽 Love the rims

[Gurucollector]

Thanks Guys for all the kind words <3 !! Glad you all like the wrap