Advice on 20" HRE P101's?

[scott13]

Looking to get into a set of 20" HRE P101's in Satin Black fitted with PS4S's to go on a 2020 F82 lowered to max setting on MP HAS w/ non-ceramic OEM brakes. Currently on 20" OEM 666's and OEM 265/30/20 + 285/30/20.

Want to make sure I don't get any rubbing, so was wondering if there's a consensus on wheel widths, offsets and tire sizes.

Seems like 20x9.5 Et 20 with 20x11 Et 37 w/ 265/30/20 and 295/30/20 is quite popular and a good fit???

Also...major question to the friendly neighborhood forum vendors...what sort of availability are we looking at these days?

Thanks for any help/advice!

[AlterZgo]

That would fit with no issues at all. I am running almost exact same setup but 20x9.5 +17 up front which I think matches the 20x11 +37 rears in terms of how flush it is. No rubbing at all with car lowered.

[x.shell]

To OP,

AlterZgo has a better offset spread (front/back) than what you posted. If you're adamant about 20x9.5 et20 on the front, then a 20x11 et40 will be better. If you want the 20x11 et37 in the rear, then a 20x9.5 et17 will match better.

I know 3mm seems like no big deal, but it really does make a difference when you're getting that close to flushed fitment.

[scott13]

Originally Posted by AlterZgo

That would fit with no issues at all. I am running almost exact same setup but 20x9.5 +17 up front which I think matches the 20x11 +37 rears in terms of how flush it is. No rubbing at all with car lowered.

Cool! Thanks for the info...much appreciated!

Originally Posted by x.shell

To OP,

AlterZgo has a better offset spread (front/back) than what you posted. If you're adamant about 20x9.5 et20 on the front, then a 20x11 et40 will be better. If you want the 20x11 et37 in the rear, then a 20x9.5 et17 will match better.

I know 3mm seems like no big deal, but it really does make a difference when you're getting that close to flushed fitment.

Nope, not adamant about those widths/offsets at all. Quite the opposite.

Wanted to get the experience and wisdom from folks that know better than I. These ain't gonna be cheap and there's no try before you buy...

It's my daily driver, so getting a good looking, yet functional fitment is way more important to me than being "hella" anything.

[1FZFE]

Just copy BBS. They know wtf they're doing.

20x9.5 et 22 (from FI-R)
20x11 et 40 (from LM-R)

+

265/30/20 and 295/30/20 PS4S

[scott13]

Originally Posted by 1FZFE

Just copy BBS. They know wtf they're doing.

20x9.5 et 22 (from FI-R)
20x11 et 40 (from LM-R)

+

265/30/20 and 295/30/20 PS4S

Thanks! That's sound advice.

Actually...I think I'm going to go in a different direction anyway. I'm seeing some REALLY long lead times for the HREs. I like them a lot, but don't really have the patience to wait MONTHS.

Thinking I may go with Signature SV104's with:

20x9.5 ET18 265/30/20 PS4S
20x11 ET38 295/30/20 PS4S

Pretty similar design-wise and ready in like 4 weeks.

[bigj505]

Originally Posted by scott13

Thanks! That's sound advice.

Actually...I think I'm going to go in a different direction anyway. I'm seeing some REALLY long lead times for the HREs. I like them a lot, but don't really have the patience to wait MONTHS.

Thinking I may go with Signature SV104's with:

20x9.5 ET18 265/30/20 PS4S
20x11 ET38 295/30/20 PS4S

Pretty similar design-wise and ready in like 4 weeks.

If you were a Cali dude, I'd say keep an eye on the classified section lol

But seriously, don't forget to check local stuff like Facebook marketplace. You never know what will pop up.

I found the one HRE FF11 color I wanted 90 miles away with 2k miles on the set. Not only did I get to skip the waiting line but I got them for less than a brand new set would cost.