Meat on 666m

[6SPD GOD]

So it's that time of the season to get some new rubber. I have my eye on PS4S

Can someone please share pictures of the following tire spec on an F82 with 666M wheels!


265/30/20 front 295/30/20 rear

275/30/20 front 295/30/20 rear

I've been searching for over an hour, but I have not been able to find any photographs of an F82, most of the pictures only display F80s


Also, any personal input regarding the pros/cons of this tire change would be heavily appreciated.

[LOW4LYF]

All over again, a 265/35 will not fit in the front without rubbing.

[4151zero]

and 275/30/20 ps4s rubs on the front of F80's and NOT f82's

[6SPD GOD]

Originally Posted by 4151zero

and 275/30/20 ps4s rubs on the front of F80's and NOT f82's

I have a stock ZCP F82 on stock suspension with 15mm spacers, hopefully the combo of 275/30/20 front 295/30/20 rear doesn't rub on heavy cornering.

[mitch32]

I posted this a few months ago showing exactly what your looking for!

275/30/20 front
295/30/20 rear

https://f80.bimmerpost.com/forums/sh...60&postcount=9

I'm on coilovers, if you need more photos let me know.

[6SPD GOD]

Originally Posted by mitch32

I posted this a few months ago showing exactly what your looking for!

275/30/20 front
295/30/20 rear

https://f80.bimmerpost.com/forums/sh...60&postcount=9

I'm on coilovers, if you need more photos let me know.

Sweet!! thank you! just placed my order.

Have you had any rubbing since you're running coilovers ?

[mitch32]

Originally Posted by 6SPD GOD

Sweet!! thank you! just placed my order.

Have you had any rubbing since you're running coilovers ?

Nada! No rubbing on the strut or the fender.

I did raise the car slightly as the roads around where I live are absolutely horrible. I'm about 1.25-1.5" lower then stock in the front and maybe 0.75" in the rear but even if i was slammed to the floor (as the kids say) I don't think it would ever rub unless you had a spacer. I'm not running spacers though and have no plan to.

Did you order P4S tires?