Akrapovic slip on Axle-back exhaust

[jakebentz]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

Full titanium Akrapovic exhaust. Was on the car for 500 miles, looking for a different sound.

[audioMeth]

looks like you are missing some parts. also, this is a V1, how many miles from previous owner(s)?

[jakebentz]

Originally Posted by audioMeth

looks like you are missing some parts. also, this is a V1, how many miles from previous owner(s)?

Pulled off previous car with 1500 miles. Can get any style tips to attach.

[jakebentz]

Originally Posted by aBMWfan

Your missing the 2 reducer clamps. I can get someone tips to fit this exhaust. Pm me for details

This is the V2 muffler, you can tell because the valves are on the sides, so this one is pretty new

Correct V2 muffler

[BzsBimmer]

Can I call BS on this?
1. This is a V1 muffler. The V2 mufflers have the serial now etched
2. This is a very used looking exhaust for only 500 miles

Are you sure you know the history of this exhaust? Any damage on the ends of the exhaust where the tips would go?
Why are the actuator pipes shinier than the rest of the exhaust?

The previous owner only put 1500 miles? What happened to the tips?

[audioMeth]

Originally Posted by BzsBimmer

Can I call BS on this?
1. This is a V1 muffler. The V2 mufflers have the serial now etched

definitely v1 and requires the valve harness extension connectors, pipe reducers, and then there is the 1500 akrapovic tips.

edit: added photo stolen from another thread

[BzsBimmer]

You won’t need the extensions. You will need to disconnect the harness from its mounting clip to extend the wiring on one side. Can’t remember which.
But yes, will need connecting clamps and the tips. For the price and the add on needed, you can just about get an entire used Evo.

I’m waiting for the OP to chime in... because this is almost definitely my old exhaust so there’s some explaining to do...