Combining a Vorsteiner GTS Lip with Dual CF Splitters

[Equilibrandt]

I'm a huge fan of how the Vorsteiner GTS/GTS-V lips mold the the contours of the bumper. The issue I'm trying to resolve revolves around fitting a lip like this with the dual CF Splitters.



This looks like it'll lead to a gap along the mid portion of the lip because it's forced a cm lower due to the thickness of the CF splitters, as well as a gap along the edges near the deflectors. Has anyone attempted any fitment with a molded bumper of this style (Vorsteiner, AutoTecknic)? For the central gap I was planning to use some black compression foam, but I'm not sure how to resolve the edge/deflector area gap. All the fasteners would have to use a few washers, the same thickness as the offset made by the splitters. Maybe some kind of thick rubber matting, cut to shape?

Thoughts?

[NYBulldog]

I tried it. Didn’t work. I’m sure you could modify the lip enough to make it work but I had zero desire to ruin the Vorsteiner lip. There is barely any give in the lower lip. The jam also creates an issue toward the outer edge of the bumper. I will look for some pictures of my test fit.

[mgm.m4]

You can, just gotta use something to cut the under part of the CF splitters (lol @ cutting a vorstiener lip). One of my friends did this with theirs to fit the cs lip and it looks great

[Equilibrandt]

Originally Posted by NYBulldog

I tried it. Didn’t work. I’m sure you could modify the lip enough to make it work but I had zero desire to ruin the Vorsteiner lip. There is barely any give in the lower lip. The jam also creates an issue toward the outer edge of the bumper. I will look for some pictures of my test fit.

That'd be great if it wasn't too much trouble!

Originally Posted by mgm.m4

You can, just gotta use something to cut the under part of the CF splitters (lol @ cutting a vorstiener lip). One of my friends did this with theirs to fit the cs lip and it looks great

I was thinking of that over the weekend, would be a lot of tape test fitting and dremeling off bit by bit. Any chance he/she has any pictures of it floating around?

[Gatoferoz25]

Originally Posted by bspaulsen

That'd be great if it wasn't too much trouble!

I was thinking of that over the weekend, would be a lot of tape test fitting and dremeling off bit by bit. Any chance he/she has any pictures of it floating around?

+ 1
This is a great point, please keep us update it

[M-PRESIV]

I’m standing by for this one as well. I was hoping the splitters would fit in conjunction with the GTS-V front lip, but it’s not looking good.