- GT Motoring - Official F80 M3 / F82 M4 BBS Wheels Gallery and Fitment Guide

[GTM_Challenge]

Originally Posted by JL M3

I see there is a 10" +35 RI-D. Would that fit in the front? If not, is there a 10" that would?

I don't see this in the application listing for the RI-D at all?

20x10 +35 5x114.3 is the only thing i see close?

[Poofyo101]

e92 m3 20" fitment bbs lm do not fit the m4?

[l!ve]

Originally Posted by GTM_Challenge

The width is conservative on the RI-D, but the offsets are actually very good for a nice flush fitment with even a little room for wider tires.


19x9 +22 Front
19x10 +25 Rear

Am I right that this extends the wheel out 7mm in the front and 15mm in the rear vs. the OEM 19"?

If so, this seems pretty good to go without spacers right?

[GTM_Challenge]

Originally Posted by l!ve

Am I right that this extends the wheel out 7mm in the front and 15mm in the rear vs. the OEM 19"?

If so, this seems pretty good to go without spacers right?

Stock Wheel size and offsets:
- 19x9.0 Front (ET29) 19x10.0 Rear (ET40)

You are correct in your math. No spacers would be needed unless you wanted to push the front out a little more

[Noel_Costa]

Originally Posted by GTM_Challenge

Stock Wheel size and offsets:
- 19x9.0 Front (ET29) 19x10.0 Rear (ET40)

You are correct in your math. No spacers would be needed unless you wanted to push the front out a little more

Hi, I'm looking for a Brake Clearance Template for the normal M3/4 Brake Calipers, is yours in the meantime available?

Thanks an lot!

Noel

[0-60Motorsports]

I'm looking for new hardware for my LMs. Can you guys supply that?

[Alpine-F80]

Originally Posted by 0-60Motorsports

I'm looking for new hardware for my LMs. Can you guys supply that?

No clue about this "company", but I'd recommend Black Forest Industries. BBS LM Hardware.

I used them for new hardware when converting my LM's to 3pc, but they also have the BBS OE spec hardware for 2 piece BBS LM (M7x24). Looks like they don't have them in black though, but I imagine there's other options if you just look for "M7x24 BBS LM hardware"

[0-60Motorsports]

Originally Posted by Alpine-F80

No clue about this "company", but I'd recommend Black Forest Industries. BBS LM Hardware.

I used them for new hardware when converting my LM's to 3pc, but they also have the BBS OE spec hardware for 2 piece BBS LM (M7x24). Looks like they don't have them in black though, but I imagine there's other options if you just look for "M7x24 BBS LM hardware"

Thanks brother! I just need the in chrome/steel. I'll reach out to them today.

[LanceM26]

Originally Posted by GTM_Challenge

- GT Motoring - Official F80 M3 / F82 M4 BBS Wheels Gallery and Fitment Guide



As usual, BBS wheels will make sure they have great fitments for the new F8X BMW M3. We will be keeping a full fitment and photo log of these on the M3 and M4 for you guys here.

We should be able to have details of what will be able to fit here in the next 2 weeks or so as cars are made available here. In addition to wheel fitment we will try to also include tire fitment and suggestions when possible.

GT Motoring will also be making CAD drawings for wheel fitment templates and will make this available here so customers can check caliper clearance on any wheels they are looking at. We will make templates for both standard and optional carbon ceramic brakes.

Keep an eye out here for more details daily!


UPDATED 7/1/14

- BMW F8X M3 / M4, non MCCB brakes

BBS CH-R

Front:
19x9 +20 (OEM tire size only)
19x9.5 +35, use 10mm spacer (OEM tire size only)
Rear:
19x10.5 +25 (OEM tire size only)

Front:
20x9 +29
Rear:
20x10.5 +35


BBS CH

Front:
19x8.5 +20
Rear:
19x10 +20 (OEM tire size only)


BBS FI

Front:
20x9.5 +26
Rear:
20x10.5 +28 (aggressive fitment)


BBS RE-V

Front:
19x9 +22
Rear:
19x10 +25 (OEM tire size only)


BBS RX-R

Front:
19x9 +32, use 10mm spacer
Rear:
19x10 +35

Front:
20x9 +32, use 10mm spacer
Rear:
20x10 +35


BBS Super RS

Front:
19x9 +20
Rear:
19x10 +20 (OEM tire size only)




Suggested tire fitments:

Coming soon...

Sorry to revive an old thread, do you have the brake templates for steel rotors?

[LanceM26]

Originally Posted by Noel_Costa

Hi, I'm looking for a Brake Clearance Template for the normal M3/4 Brake Calipers, is yours in the meantime available?

Thanks an lot!

Noel

Did you ever end up finding the template?

[Andi-M2]

M4 Competition F82 with 9,5+10,5x20 BBS FI-R and 265/30-20 + 285/30-20 Continental Sportcontact 7. No spacers added.