Help identifying this wheel.

[///MPhatic]

Saw this MG F80 on YouTube and the wheels just captured me a bit. Any idea what they are?

It starts at 6:00 (if the start point didn't save).

[///MPhatic]

Some stills.

[TopJimmy]

Looks like Signature SV502’s, but the spoke V might be a little different…

[///MPhatic]

Originally Posted by TopJimmy

Looks like Signature SV502’s, but the spoke V might be a little different…

Signature was the first wheel that came to mind, but I don't think it's quite there. But thanks!

Notice how the lug hole cuts into the spoke base, and how between the spokes there is a little notch cut out.

[TopJimmy]

I see what you mean. I saw those cuts on BC Forged but the V’s are shaped different.

I’m sure the wheel fanatics will chime in.
LOW4LYF
Got any ideas?

[///MPhatic]

They also look like the 1221, but I contacted them and it's not their wheel.

[///MPhatic]

These look close.

Variant Argon?

https://www.fitmentindustries.com/bu...-argon-20x9-20

[TopJimmy]

In the still shots it looks like the spacing between the V’s are a little wider than the top of the V’s. The FI’s look evenly spaced in both.

[///MPhatic]

Originally Posted by TopJimmy

In the still shots it looks like the spacing between the V’s are a little wider than the top of the V’s. The FI’s look evenly spaced in both.

Yeah, one is deeper because it doesn't have lug holes to contend with. The ADV1 wheel has a similar style, so I posted it because I thought it might be a wheel made by ADV1, but given his location I just deleted it.

I think these are 20's too, which might make them harder to identify.

[JAI///M3]

My first thought was it looked like a forgeline profile in the center.

[///MPhatic]

Originally Posted by JAI///M3

My first thought was it looked like a forgeline profile in the center.

It does, it's the deep hub.

[MineralWhiteF80]

Im guessing it's the BC Forged EH182. After replaying that video full screen super slow mo several times, im pretty sure its these. It's just hard to really tell the nuances because of the video quality and black wheel color, but the EH182 does have the spoke design, the lug hole cuts into the spoke base, the reverse chamfer where the spokes meet, etc.

https://bcforged-na.com/monoblock/eh182/

edit- here is a picture of the EH182 on a Audi R8.

[///MPhatic]

Originally Posted by MineralWhiteF80

Im guessing it's the BC Forged EH182. After replaying that video full screen super slow mo several times, im pretty sure its these. It's just hard to really tell the nuances because of the video quality and black wheel color, but the EH182 does have the spoke design, the lug hole cuts into the spoke base, the reverse chamfer where the spokes meet, etc.

https://bcforged-na.com/monoblock/eh182/

edit- here is a picture of the EH182 on a Audi R8.

Good call. My first thought was BC Forged, but since the car is across the pond I thought it might be just something similar. I'm also not familiar with the EH series, just the KL. Thanks for the info.