11-17-2023, 12:11 PM | #1 |
First Lieutenant
127
Rep 315
Posts |
CDV Removal, do we have one? Review? 6MT F8x
I searched the forums cannot find anything on CDV on our chassis. I believe we do have one but has anyone done the mod on F8x reading this post and can comment on if it is worth the effort?
|
11-17-2023, 04:51 PM | #2 |
Captain
567
Rep 894
Posts |
You are correct. We absolutely do have one.
https://www.bimmerpost.com/forums/sh...php?p=26894686 I replaced mine with the E9X slave cylinder. You’ll understand from the above thread. I can’t say I noticed an incredible difference, but many people have. It was also a while ago, so I may have just forgotten about the shift feel beforehand.
__________________
Previously:
2010 E92 335 (6MT) 2011 E92 M3 ZCP (6MT) |
Appreciate
0
|
11-18-2023, 11:39 PM | #3 |
Colonel
451
Rep 2,062
Posts
Drives: 2017 F80 M3 ZCP BSM 2012 E82 1
Join Date: May 2012
Location: Boston, MA
|
Didn’t search hard enough. There’s more than 1 write up about the diy to remove it. Yes it’s worth it. Yes it’s easy
__________________
2017 F80 ZCP BSM - Klein Innovation. ActiveAutowerkes. AR Design. BootMod3 Paul Johnson. EvRw. Project Gamma. RW Carbon. UCP. UUC. Hawk. Dinan. NGK. Macht Schnell. TMS. VR. aFe.
RIP - E82 135i - 7/7/2021 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|