08-21-2022, 03:24 PM | #1 |
Private First Class
125
Rep 138
Posts |
cleaning out front grille?
this is probably a stupid question
i have some debris in the front grille area using a leaf blower and a pressure washer has not worked in dislodging the debris anything else i can try that does not require front lip disassembly? thanks! |
08-21-2022, 04:31 PM | #2 |
Captain
1088
Rep 916
Posts |
There is a ton of content on this topic. The search function doesn't always work well but you'll eventually find what you need.
|
Appreciate
0
|
08-22-2022, 12:41 AM | #3 |
Captain
340
Rep 813
Posts |
You get those extension picker things and pick them through the grille area one by one. Or just live with it.
Easiest and simple is to remove the bumper. But you don't want to go this route. |
Appreciate
0
|
08-22-2022, 11:40 AM | #4 |
Private First Class
102
Rep 103
Posts |
https://f80.bimmerpost.com/forums/sh...ghlight=leaves
https://f80.bimmerpost.com/forums/sh...ghlight=leaves https://f80.bimmerpost.com/forums/sh...ghlight=leaves Just search for 'leaves' and you will find a few, don't recommend removing the bumper for this. |
Appreciate
2
D_SheerDrivingPleasure1088.00 darrvao777125.00 |
08-22-2022, 05:14 PM | #5 |
Major
1359
Rep 1,320
Posts |
Drop the plastic cover over the oil cooler then, drop the oil cooler to be thorough.
OR, be like me and use a pressure washer and sweep side to side. (Leaves break apart and fly out)
__________________
MGM Ext, SO int, Euro IKON, CS front lip, Carbon 1.5 diffuser, GTS/CS coding, M perf rear spoiler, & everything else STOCK.
(Previous E39 and NA1 NSX owner) Those were the days! |
Appreciate
0
|
08-23-2022, 08:57 AM | #6 |
Enlisted Member
24
Rep 31
Posts |
What brand of leaf blower do you use? After I pressure washed, my Ego 650 got rid of 90% of the debris.
|
Appreciate
1
darrvao777125.00 |
08-23-2022, 09:10 AM | #7 |
Private First Class
125
Rep 138
Posts |
thanks for the advice everyone
i just got an ego too and the blower hole fits almost perfectly in that radiator space same thing, was able to blow out 90% of it with the ego there is one cigarette butt in there that drives me insane so i have an order for a shop vac attachment to see if i can suction that thing out will update everyone on how it works thanks! super helpful links too, if anyone is wondering the search function works a lot better on the app than it does a browser page ! |
Appreciate
1
Gibplayer23.50 |
08-24-2022, 12:26 PM | #8 | |
Private First Class
77
Rep 138
Posts |
Quote:
Dropping oil cooler works the best and easiest. Cleaning side coolers is easy as well. Remove front portion of wheel well liner and couple bolts holding each one. No need to disconnect hoses, just tilt radiators back enough. Garden hose and high volume low pressure water is the key, flushing it from the back. High pressure on any radiator fins is a big no no. |
|
Appreciate
3
|
08-24-2022, 12:28 PM | #9 | ||
Private First Class
125
Rep 138
Posts |
Quote:
that's good to know i was trying to angle my pressure washer in there to blast away, guess i'm lucky i stopped early 😂 |
||
Appreciate
0
|
08-25-2022, 07:23 AM | #10 | |
Captain
1088
Rep 916
Posts |
Quote:
|
|
Appreciate
0
|
08-25-2022, 08:27 AM | #11 | |
Enlisted Member
24
Rep 31
Posts |
Quote:
|
|
Appreciate
0
|
08-25-2022, 01:23 PM | #12 | |
Private First Class
77
Rep 138
Posts |
Quote:
Too bad I don't have pet turtle, I'm sure it would enjoy this. |
|
Appreciate
1
D_SheerDrivingPleasure1088.00 |
08-25-2022, 05:13 PM | #13 | ||
Private First Class
122
Rep 102
Posts |
Quote:
|
||
Appreciate
0
|
08-27-2022, 01:31 PM | #14 |
Captain
455
Rep 844
Posts |
Do you need to remove the bumper to remove that plastic shield before getting to the oil cooler?
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|