05-07-2021, 02:56 PM | #1 |
Captain
533
Rep 916
Posts |
What size front tires to match 295/30/19 rear tires?
What size front tires do i need to buy to match 295/30/19 rear? I have a set of spare 265/35/19 right now. Is it 265/35 front okay to match with 295/30 rear?
|
05-07-2021, 03:53 PM | #2 |
Lieutenant Colonel
1538
Rep 1,665
Posts |
Not a good idea. Front tire would look thicker than rear tire and your traction control will spazz out b/c the stagger is the opposite for what it should be with front tire taller than the rear tire. You should run 275/30/19 to match with 295/30/19 or 265/35/19 to run with 295/35/19. Furthermore, it will look awkward with a thicker tire up front than rear and raise the front of your car by about 1/4" more than rear.
Last edited by AlterZgo; 05-07-2021 at 04:08 PM.. |
Appreciate
0
|
05-07-2021, 06:54 PM | #3 |
First Pride
110
Rep 1,557
Posts |
I'm having that issue now, as I had the same questions about front tire match for the 295/30/19 rear tire to avoid the traction issue, I decided to get 265/30/19 fronts and my MDM mode is spazzing out, I'm not sure if it's a combination of newer tires and 60 to 70 degree inconsistent weather, I'm tuned with pure turbos but I don't remember having this issue with the stock setup
__________________
Modded M4
|
Appreciate
0
|
05-07-2021, 09:03 PM | #4 | |
Lieutenant Colonel
1538
Rep 1,665
Posts |
Quote:
However for my 20” rims, I’ve been running a 30mm stagger: 265/30/20 F and 295/30/20 R for about 6 months now and zero issues whatsoever. So YMMV. |
|
Appreciate
0
|
05-08-2021, 12:34 PM | #5 |
Major General
5457
Rep 5,148
Posts |
In MPS4S (for example) the 265/35/19 is 26.3in and the 295/30/19 is 26.0in. This works if the front is half worn when you put new rears on. The 255/35/19 is 26in from the start.
The 305/30/19 is 26.3in, and matches the front 265/35 well.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|