Are my rotors dull?

[f82edwards]

Hey, it was hard to measure with the calipers as there’s a tiny lip, came out to 29.4mm.

From the looks of things, should they be replaced?

[afadeev]

Originally Posted by f82edwards

Hey, it was hard to measure with the calipers as there’s a tiny lip, came out to 29.4mm.

I assume we are talking about 380mm x 30mm front rotors.
New thickness is 30mm, minimum thickness is 28.4mm.

Originally Posted by f82edwards

From the looks of things, should they be replaced?

Not at all, plenty of life left.

HTH,
a

[N1rve]

Originally Posted by f82edwards

Hey, it was hard to measure with the calipers as there’s a tiny lip, came out to 29.4mm.

From the looks of things, should they be replaced?

Rotor should be fine. Pad looks a little thin from the angle.

[f82edwards]

Originally Posted by N1rve

Rotor should be fine. Pad looks a little thin from the angle.

Haha, pad was very thin, just put EUR1880's on

[N1rve]

Originally Posted by f82edwards

Haha, pad was very thin, just put EUR1880's on

I have those same pads. Been using them for like 3 years. Still looking like new and been using the original rotors with the car. 67K miles now.