Volk Racing TE37 Gallery For F80/82

[Hxngs]

Just ended up with a set of te’s. What type of tires are you guys running on te37 sl’s. The 18in wheel

[blaccm3]

Originally Posted by Hxngs

Just ended up with a set of te’s. What type of tires are you guys running on te37 sl’s. The 18in wheel

It would help to list your spec. Assuming you have the common set-up of 9.5 +22 and 11 +34 so you can do 265/295

[Hxngs]

Originally Posted by blaccm3

It would help to list your spec. Assuming you have the common set-up of 9.5 +22 and 11 +34 so you can do 265/295

Yeah I’m going with the 35 sidewalls

[vietboyx1115]

Originally Posted by Hxngs

Yeah I’m going with the 35 sidewalls

I went 275/35 and 295/35 without issue.

[Hxngs]

Originally Posted by vietboyx1115

I went 275/35 and 295/35 without issue.

Just what I need. Thank you

P.s are you lowered on anything?

[vietboyx1115]

Originally Posted by Hxngs

Just what I need. Thank you

P.s are you lowered on anything?

EMD springs no pucks

[Cboy]

Originally Posted by EDMJAY

I’m maxed at -3.2 camber. Had some rubbing driving to get an alignment but after adding camber it went away.

Do you have rear toe arms? How do you get -3.2 if not? Thanks!

[heitzke]

Originally Posted by r0wr

What’s everyone doing with their rusted hubs? Love my TE37SL but the rusted hubs are killing the vibe. Caps are so expensive too.

The caps are def expensive, and you really can't find the SL adapters anymore. I have a set on my car and it was really frustrating to make them even *sort of* fit. The hubs of the F8X extrude too far and doesn't let the adapter sit in the wheel enough.

I had to make a little gasket from some rubber pipe fitting to press them in place. You can't tell but it's never felt right to me. Not having caps was driving me crazy though.

[r0wr]

Originally Posted by heitzke

The caps are def expensive, and you really can't find the SL adapters anymore. I have a set on my car and it was really frustrating to make them even *sort of* fit. The hubs of the F8X extrude too far and doesn't let the adapter sit in the wheel enough.

I had to make a little gasket from some rubber pipe fitting to press them in place. You can't tell but it's never felt right to me. Not having caps was driving me crazy though.

Yeah, I am considering going the "brush off the rust, spray paint" method. Just haven't found time to do it.

[EDMJAY]

Originally Posted by Cboy

Do you have rear toe arms? How do you get -3.2 if not? Thanks!

No toe arms, just have to turn the coils down and go low.

[M3AN_F8IGHTY]

gotta love te's

[Andydr3w]

Just finished finalizing my setup

Mag blue SL’s

18x9.5 ET22 (5mm spacer)
18x11 ET34

275/35
315/30 Falken RT660’s

[M3_Enjoyer]

System Spec TE37SL's Blast Bronze
18x9.5 et22 - 18x11 et34

Michelin ps4s
265/35/18 - 285/35/18

KW HAS

Stud Conversion

No spacers currently

[funk323]

test fitting some TE's today. in the pic there is a 15mm spacer, but without a spacer its pretty close, it hits the coilovers (tractive), so I may back down to 5mm or something like a 7.5mm spacer.

18x10.5 et 30.

[heyyouduh]

Originally Posted by funk323

test fitting some TE's today. in the pic there is a 15mm spacer, but without a spacer its pretty close, it hits the coilovers (tractive), so I may back down to 5mm or something like a 7.5mm spacer.

18x10.5 et 30.

Awesome. Didn't even know rays made TEs in 18x10.5 etc 30. Would be solid for a square set up.

[funk323]

Originally Posted by heyyouduh

Awesome. Didn't even know rays made TEs in 18x10.5 etc 30. Would be solid for a square set up.

Yeah, I was lucky they had these actually in stock. I wanted bronze but cant be too picky when the wait times are so long these days.

[M3_Enjoyer]

Originally Posted by Russo_T

System Spec TE37SL's Blast Bronze
18x9.5 et22 - 18x11 et34

Michelin ps4s
265/35/18 - 285/35/18

KW HAS

Stud Conversion

No spacers currently

Just a quick question if anyone has a similar setup and is running spacers - what size(s) were safe for you with no rubbing? Thinking of going 5mm front/10mm rear, inputs are appreciated!

[Original]

If you guys are in the market for TE37SL, Saga, or Ultra. Please send me a PM! I have a special forum pricing for members.

[Original]

Originally Posted by Russo_T

Just a quick question if anyone has a similar setup and is running spacers - what size(s) were safe for you with no rubbing? Thinking of going 5mm front/10mm rear, inputs are appreciated!

You can squeeze slightly bigger than 5mm in front, if you are running 265/35 with 9.5 ET22. However, the 10MM rear might be slightly aggressive but that depends on your alignment specs.

[Original]

Originally Posted by heyyouduh

Awesome. Didn't even know rays made TEs in 18x10.5 etc 30. Would be solid for a square set up.

They make them in 10.5 +30 in Saga models, but not in the TE37SLs.

[M3_Enjoyer]

Originally Posted by Original

You can squeeze slightly bigger than 5mm in front, if you are running 265/35 with 9.5 ET22. However, the 10MM rear might be slightly aggressive but that depends on your alignment specs.

thanks for the response! the car is currently between -1.7 to -1.9 camber all around

[funk323]

Originally Posted by Original

They make them in 10.5 +30 in Saga models, but not in the TE37SLs.

These are the newer TE37 SAGA SL's