Enable Video from USB

[pdx_m3r]

In an attempt to code the HU_NBT ECU to enable video from USB on the iDrive, I completed the following changes:

Enable Video Files from USB
3000!ENT_CODEC_XVID Activ
3000!ENT_CODEC_XVCD Activ
3000!ENT_CODEC_OGG Activ

However, this didn't work for me, so I googled the F30 forums and found the following additional file that needed to be coded:

3003 API_USB_VIDEO --> both

Alas, it worked! Hoping this thread helps others since I couldn't find the solution in this F80 forum.

[banff]

Thanks for the post. I have found that randomly some cars have both already selected and other have none. there seems to be no pattern so for anyone trying best just always check!

[FR00ZN]

Originally Posted by pdx_m3r

In an attempt to code the HU_NBT ECU to enable video from USB on the iDrive, I completed the following changes:

Enable Video Files from USB
3000!ENT_CODEC_XVID Activ
3000!ENT_CODEC_XVCD Activ
3000!ENT_CODEC_OGG Activ

However, this didn't work for me, so I googled the F30 forums and found the following additional file that needed to be coded:

3003 API_USB_VIDEO --> both

Alas, it worked! Hoping this thread helps others since I couldn't find the solution in this F80 forum.

I followed the above and it worked perfect too

[edwinm3]

nice! thanks for sharing

[Donger Kim]

I have successfully coded many features on my car but for some reason I cannot get this one to work. after I save the code, disconnect to test it out, I would double check to see if the codes are the same values but It seems to get reversed back to "niche aktiv".

I am not in front of my car/ computer but I vakue remember I couldn't find "3000!ENT_CODEC_XVCD Activ" but only had VCD (without the X) and just improvised ( I assumed that's why it didn't work but my values also got reversed.

This and auto folding mirrors, can't seem to get that to work either, although I believe I found a solution, just havnt had time to try it out.

I have an August MY16 build.