10-15-2019, 06:38 PM | #1 |
BimmerPost Supporting Vendor
24083
Rep 190,602
Posts |
Carbon Fiber M3 M4 Front Lip Install Video and Tips
In this video we show the step by step install of the XPH BMW M3 M4 Carbon Fiber Front Lip. This design is the M-Performance look. We also showcase the 2 additional designs we offer at the end of the video. The install of the other 2 designs (V & 3D Style lips) is a lot easier. You just align the bumper and use screws to secure fitment. In this install we used 3M VHB tape, it is not mandatory to do so. using screws is more than enough. We recommend using 5 screws for a secure fit but install can be done with 3 screws only. The center connection is the trickiest one. We found that securing the screw pushed more to the front of the bumper will ensure a tighter connection and close all gaps. You can secure it at the rear of the lip but it looks better if you drill the front of the lip and use a screw there. More Pictures
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
02-11-2020, 11:10 AM | #3 |
BimmerPost Supporting Vendor
24083
Rep 190,602
Posts |
Done
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
02-03-2021, 10:09 AM | #5 |
BimmerPost Supporting Vendor
24083
Rep 190,602
Posts |
I dont remember which ones we used during the install to be honest.
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|