M performance CF rear spoiler, Is this normal?

[TommyLights]

Originally Posted by chicagoshark

Evidently from what I'm told, so take it with a grain of salt, from the guys at the dealer. M4 still uses tape, M3 spoiler uses the liquid adhesive. Not sure why there is a difference between the two. But mine came with 2 boxes. Spoiler, and the liquid adhesive.

I wouldnt use it. If you want to change the look up, you wont be able to without damaging the paint.

[chicagoshark]

Originally Posted by Tommy_M4

I wouldnt use it. If you want to change the look up, you wont be able to without damaging the paint.

One. You have a point
Two. Too late haha

[TheBreeze]

Does anyone have a link to double-sided tape I would use to install a new MP spoiler? Don't want anything that could damage paint, so I'll use tape, just not sure what to use. Obviously don't want it coming off too easily

[allinon72]

Originally Posted by TheBreeze

Does anyone have a link to double-sided tape I would use to install a new MP spoiler? Don't want anything that could damage paint, so I'll use tape, just not sure what to use. Obviously don't want it coming off too easily

https://www.amazon.com/3M-Scotch-595...gateway&sr=8-4

[TheBreeze]

Originally Posted by allinon72

https://www.amazon.com/3M-Scotch-595...gateway&sr=8-4

Thanks!

[F80Speed77]

Just installed this on my car and was pretty pissed when I saw it didn't have the tape on it already. Also ECS didn't send me any of the aforementioned glue. Found some of the Super Bond 3M stuff at a local hardware store so hoping that works close to the VHB stuff.

Mah gawd was removing the factory foam glue crap awful... New one looks great though!