|
|||||||
Post Reply |
|
|
Thread Tools | Search this Thread |
| 08-28-2019, 04:42 PM | #1 |
|
Lieutenant General
 
2306
Rep 12,654
Posts |
AutoTalent | Emmotion "Emmanuele Design" Lowering Spring Kit for Bmw F82 M4
 To order please visit our website by clicking HERE We are pleased to release our lowering spring kit for the BMW M4 platform! As with our other lowering spring options, the goal with this offering was to lower the M4 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set and 100% tested to insure all the critical dimensions and rate/loads are within tolerance. The springs are then powder coated with a stealth black finish for an OEM appearance. Specifications for our lowering springs are: Front Lowering: 1.3" Rear Lowering: 0.9" Stock Front Rate: 186 lb./in. Emmotion Front Rate: 190 lb./in. Stock Rear Rate: 608 lb./in. Emmotion Rear Rate: 635 lb./in. F.A.Qs Are these springs compatible with adaptive ride control? Yes, these springs are compatible with adaptive ride control. They pair extremely well with the adjustable dampening, as they maintain the distinct ride characteristics between the different modes. Are these springs okay for a daily driver? Yes, these springs were specifically designed for daily driven vehicles. They were designed to maintain the factory ride quality. Will lowering springs cause my factory shocks and struts to wear out prematurely? Our springs are a linear rate design, similar to the OEM units. As such, they will not cause additional wear on the shocks and struts. The spring heights are also designed to stay within the travel range of the factory shocks and struts to ensure longevity of the factory components. Will there be any added noise with these springs? No, as we use a linear design with no dead coils, there will be no added noise over a stock spring. These springs are designed to be a direct replacement for the factory units, with no need to change any other components.   How to Place Your Order: Phone Domestic: (855) 973-2757 X 104 Phone International: (310) 231-7800 X 104 E-mail: Online@AutoTalent.com Website: www.AutoTalent.com Payment:  Installations: Feel free to visit us at our facility in Los Angeles, CA. We install everything we sell. 19143 S. Hamilton Ave Gardena, CA 90248  Shipping: All orders are shipped via FedEx, UPS, USPS and Pilot. International, Hawaii and Alaska customers: Please contact us for the best quote possible. Hours of Operation: Monday through Friday: 10AM-7PM Pacific Time Saturday: By appointment only |
Post Reply |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
