08-13-2020, 10:08 PM | #1 |
Captain
563
Rep 884
Posts |
Anyone in central NJ have M Performance HAS installed somewhere other than the dealer and happy with the install?
Please name the shop! Thanks. UPDATE I'm updating this post because the best use of this forum, IMHO, is the community helping each other out. I did a bit of research before getting my MP HAS installed today and wanted to share it, since I don't think it's private info. After doing my research, I reached out to the following shops for the springs install: Kies Motorsports - I was informed by them that they no longer do installations (other than crank hubs). They did refer me to Cliff @ TSD Motorsports, who was their former installer, but now is a non-affiliated shop. TSD-Motorsports - Cliff informed me that they do not do HAS installations becaise there is a lot of risk to the OEM struts during install. Tyspeed Automotive - Tyler is a good guy and a great mechanic. He's def. a BMW expert. He quoted me $550 for the install and $169 for the alignment. This is a pretty competitive price! Bimmerclinic - I have never been there, but they are a BMW shop and the closest to home. They quoted me $1080 + tax for the install and $240 + tax for the alignment. Redline Speed Worx - This shop was referred to me by a BMW enthusiast friend of mine, who's opinion I trust. They were also close to home. They quoted $1200 + tax, including the alignment. The Stance Shop - This shop was referred to me below by HarrisoneliF82. Big shout out to you sir! Keith, the owner of The Stance Shop quoted me $200 for the install and $80 for the alignment. That's an unreal price, so much that I was skeptical. I went with The Stance Shop for multiple reasons: (1) I looked at his Instagram page (@the_stance_shop) at it's almost entirely F8x's. Keith himself owns an E46, an E90 and a F80. He's definitely an F8x expert. (2) Keith was the only one of the above shops who was able to confirm that he has specifically installed a handful of MP HAS kits before. Everyone else told me that all the kits are essentially the same install, but couldn't confirm specifically installing MP HAS (may be true, but I wanted previous MP HAS install experience). (3) Keith was the most reachable. (4) Obviously the price. Until I got there, I was still somewhat skeptical. Sounded too good to be true. Well, Keith installed the entire kit in about an hour and a half, while talking to me half the time and answering his phone the other half. It was like clockwork for him. He could easily install it in under an hour without distractions. The Stance Shop is in Queens, and so the kit was immediately put to the test with the bumpy side roads. Thank God, no sounds coming from the suspension. By all accounts, super clean install. I was initially considering doing the install myself, but at that rate, it really wasn't worth my time to do it. This forum needs to know about The Stance Shop! Keith does a lot more than just suspension installs on this platform, at amazing prices!
__________________
Previously:
2010 E92 335 (6MT) 2011 E92 M3 ZCP (6MT) Last edited by RElias21; 08-29-2020 at 03:26 PM.. |
08-14-2020, 06:02 AM | #3 |
driver
816
Rep 777
Posts |
Maximum PSI and Bimmerclinic do all kinds of BMW work including suspension upgrades. They do alignments and cornerbalancing as well. Located in South Amboy just south of the Driscoll Bridge or Route 35
|
Appreciate
0
|
08-14-2020, 06:46 AM | #4 | |
Captain
563
Rep 884
Posts |
Quote:
Yea, I considered them and I'm sure they do good work, but bimmerclinic quoted me 1080 + tax. I don't think the job warrants that price.
__________________
Previously:
2010 E92 335 (6MT) 2011 E92 M3 ZCP (6MT) |
|
Appreciate
0
|
08-14-2020, 07:08 AM | #5 | ||
Lieutenant
266
Rep 563
Posts |
Quote:
|
||
Appreciate
1
RElias21562.50 |
08-14-2020, 05:22 PM | #6 |
Lieutenant Colonel
775
Rep 1,751
Posts |
|
Appreciate
0
|
08-14-2020, 05:35 PM | #8 |
Lieutenant
266
Rep 563
Posts |
|
Appreciate
0
|
08-14-2020, 07:00 PM | #10 |
Captain
563
Rep 884
Posts |
The rear looks doable to me. The fronts look a bit more complicated, to me at least.
__________________
Previously:
2010 E92 335 (6MT) 2011 E92 M3 ZCP (6MT) |
Appreciate
0
|
08-14-2020, 08:27 PM | #11 |
bmw tech
473
Rep 365
Posts |
sent pm
__________________
Lehigh Valley Motors
193 Front Street Hellertown, PA 18055 484.214.6464 Mainentance-Repair-Performance |
Appreciate
0
|
08-29-2020, 03:18 PM | #14 |
Captain
563
Rep 884
Posts |
Update to my initial post above.
Pic of the car after install. I went with the BMW recommended height.
__________________
Previously:
2010 E92 335 (6MT) 2011 E92 M3 ZCP (6MT) |
Appreciate
0
|
08-29-2020, 03:30 PM | #16 |
Captain
563
Rep 884
Posts |
I bought the kit itself used from a forum member in Cali who only had it on the car for about 500 miles, and then decided he was selling the car.
Kit cost me $950 shipped (including the hardware) and installed for $200. Total cost for MP HAS at $1150 installed. That's less that the kit alone new!
__________________
Previously:
2010 E92 335 (6MT) 2011 E92 M3 ZCP (6MT) |
Appreciate
0
|
08-29-2020, 03:34 PM | #17 | |
Banned
4999
Rep 4,139
Posts |
Quote:
|
|
Appreciate
0
|
08-30-2020, 11:42 AM | #21 |
Lieutenant Colonel
775
Rep 1,751
Posts |
|
Appreciate
0
|
08-30-2020, 11:44 AM | #22 | |
Lieutenant
266
Rep 563
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|