Autotalent
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > DIY and Coding Discussions

Post Reply
 
Thread Tools Search this Thread
      02-20-2019, 09:55 PM   #1
netinvader
Private First Class
United_States
61
Rep
148
Posts

Drives: 2018-M3 CS & 1987-325 IS
Join Date: Dec 2017
Location: San Francisco, CA

iTrader: (1)

DIY How to perform iSTEP UPDATES on NBTEVO (for enabling fullscreen CarPlay)

In order to enable fullscreen CarPlay via a 3rd party .BIN solution, you need to be running on [18-07-549 / NBTevo_O] or greater. For reference, my MY2018 F80 was running [iSTEP 17-07-507 / NBTEvo_L].

This PDF covers the entire process of how to update your NBTevo headunit. Fully documented with photos, screenshots and even a process log so you can follow step by step. This same guide can technically be used to update any module in your car --as always, do your research as your conditions may differ than mine. You assume all responsibility and risk. This guide is for educational purposes only.

Please PM me if you have any feedback.

Last edited by netinvader; 02-21-2019 at 01:04 AM..
Appreciate 7
      02-24-2019, 09:44 PM   #2
pmooiweer
Zymurgist
United_States
77
Rep
154
Posts

Drives: 2018 BMW M3 (F80)
Join Date: May 2012
Location: Philadelphia area

iTrader: (0)

Thanks for sharing this. I'm looking at buying the full screen patch by itself, which requires CarPlay to be installed and activated. I was hoping that flashing HU_NBT2 wouldn't require reactivating CarPlay, but I guess that's not the case. Does CarPlay need to be reinstalled or reactivated after flashing and, if so, how do you do that (where would I get the .bin file needed)?
Appreciate 1
bordins18.00

      02-24-2019, 10:04 PM   #3
netinvader
Private First Class
United_States
61
Rep
148
Posts

Drives: 2018-M3 CS & 1987-325 IS
Join Date: Dec 2017
Location: San Francisco, CA

iTrader: (1)

Quote:
Originally Posted by pmooiweer View Post
Thanks for sharing this. I'm looking at buying the full screen patch by itself, which requires CarPlay to be installed and activated. I was hoping that flashing HU_NBT2 wouldn't require reactivating CarPlay, but I guess that's not the case. Does CarPlay need to be reinstalled or reactivated after flashing and, if so, how do you do that (where would I get the .bin file needed)?
Just sent you a PM.
Appreciate 1
      03-19-2019, 02:55 AM   #4
sj22
Lieutenant
Canada
187
Rep
531
Posts

Drives: 14 F15 50I
Join Date: Nov 2011
Location: Vancouver

iTrader: (0)

thanks for this, i will upgrade atm and nbthu2 isteps for full screen carplay this weekend. how long did the update take for you? any idea how to activate full screen carplay using fsc since the bin method wont work with the latest isteps?
Appreciate 0
      03-19-2019, 01:00 PM   #5
netinvader
Private First Class
United_States
61
Rep
148
Posts

Drives: 2018-M3 CS & 1987-325 IS
Join Date: Dec 2017
Location: San Francisco, CA

iTrader: (1)

Quote:
Originally Posted by sj22 View Post
thanks for this, i will upgrade atm and nbthu2 isteps for full screen carplay this weekend. how long did the update take for you? any idea how to activate full screen carplay using fsc since the bin method wont work with the latest isteps?
Took about 45 min. If you check the log at the end of my document, it gives you a full timeline as to how long each section takes.

Also, hit up wibbles for fullscreen activation with the latest istep.
Appreciate 0
      05-03-2019, 11:22 AM   #6
ssgm1x
Lieutenant
ssgm1x's Avatar
United_States
208
Rep
563
Posts

Drives: 2018 BMW M3
Join Date: Aug 2017
Location: cherry hill ,NJ

iTrader: (0)

Quote:
Originally Posted by pmooiweer View Post
Thanks for sharing this. I'm looking at buying the full screen patch by itself, which requires CarPlay to be installed and activated. I was hoping that flashing HU_NBT2 wouldn't require reactivating CarPlay, but I guess that's not the case. Does CarPlay need to be reinstalled or reactivated after flashing and, if so, how do you do that (where would I get the .bin file needed)?
DO NOT DO IT !!!! Updated my 2018 M3 NBTevo to latest software (just the NBTevo was updated) then patched fullscreen carplay. iDrive unit keeps rebooting now 1-3 times a day. Its not worth it .....
__________________
2018 BMW M3 DCT
10.67sec 1/4mi.@ 133.7mph, Stock Turbos, F80 Paul, BM3.
Appreciate 0
      05-05-2019, 05:10 PM   #7
netinvader
Private First Class
United_States
61
Rep
148
Posts

Drives: 2018-M3 CS & 1987-325 IS
Join Date: Dec 2017
Location: San Francisco, CA

iTrader: (1)

I've done this procedure on two different 2018 M3, including a M3 CS and I have not experienced any kind of rebooting, bugs, lags or glitches of any kind.
Appreciate 0
      05-09-2019, 10:05 AM   #8
pmooiweer
Zymurgist
United_States
77
Rep
154
Posts

Drives: 2018 BMW M3 (F80)
Join Date: May 2012
Location: Philadelphia area

iTrader: (0)

Same here; no issues whatsoever. I flashed NBT to version P (November 2018 software version) and patched CarPlay via Enet cable/internet.
Appreciate 0
      06-09-2019, 05:48 PM   #9
M140iGuy
Private First Class
M140iGuy's Avatar
15
Rep
108
Posts

Drives: M140i
Join Date: Dec 2018
Location: Earth

iTrader: (0)

Do you need to use ISTA to clear any errors or is ESYS all that's needed?
Appreciate 0
      06-10-2019, 06:17 PM   #10
pmooiweer
Zymurgist
United_States
77
Rep
154
Posts

Drives: 2018 BMW M3 (F80)
Join Date: May 2012
Location: Philadelphia area

iTrader: (0)

Quote:
Originally Posted by M140iGuy View Post
Do you need to use ISTA to clear any errors or is ESYS all that's needed?
I used ISTA to clear all errors, both before and after flashing (so I could tell which errors were specific to NBT flash). Note that flashing takes about 45 minutes, so make sure to use a power supply to avoid draining your battery.

The full-screen patch takes about 6 minutes and requires a strong internet signal. Assuming you'll be using your wired port for connecting to the car, you'll need a strong wireless internet connection.
Appreciate 0
      12-06-2019, 02:45 AM   #11
PaulM4
Private
3
Rep
59
Posts

Drives: 2016 M4
Join Date: Dec 2018
Location: San Diego

iTrader: (0)

Hi folks. I'm looking for updates my ISTEP to the latest but I have Head unit retrofitted to ID6 will it be any issue?
Appreciate 0
      12-06-2019, 02:39 PM   #12
kubax86
BimmerPost Supporting Vendor
kubax86's Avatar
Germany
457
Rep
887
Posts


Drives: M4
Join Date: Jul 2017
Location: World

iTrader: (3)

Quote:
Originally Posted by PaulM4 View Post
Hi folks. I'm looking for updates my ISTEP to the latest but I have Head unit retrofitted to ID6 will it be any issue?
You need to have OABR(Ethernet to Gateway) connected.
__________________
Apple CarPlay for NBT EVO/ENTRYNAV2/MGU (iDrive 5/6/7)
Fullscreen CarPlay Patch for EVO and WAY, Region Changes, Map lifetime Codes, All FSCs, Remote Coding Services

oempackbmw@gmail.com or PM
Appreciate 0
      05-19-2020, 11:42 AM   #13
sstyle
Enlisted Member
7
Rep
44
Posts

Drives: 320xi
Join Date: Mar 2020
Location: Russia

iTrader: (0)

But how to know shipment I-step if I retorit HU?
Appreciate 0
      05-20-2020, 02:37 PM   #14
cryptz
Lieutenant
United_States
129
Rep
410
Posts

Drives: 2015 m4
Join Date: Jun 2014
Location: pottstown pa

iTrader: (1)

Quote:
Originally Posted by sstyle View Post
But how to know shipment I-step if I retorit HU?
just wanted to throw it out there, i have found that to not be overly critical. if you calculate everything and the hwel is black it will update without issue. I tested mine and found a handfull of istep shipment versions that all resulte din hwel being black. its possible there were no nbt evo updates through those various istep shipment builds, or perhaps it isnt that sensitive. Either way my evo came from a 2019 car, every istep shipment variation i tried from late 2018 had the same result.
Appreciate 0
      08-12-2020, 08:37 AM   #15
nbt
New Member
nbt's Avatar
Germany
-2
Rep
19
Posts

Drives: 2016 f36 430i MPacket
Join Date: Sep 2019
Location: Germany

iTrader: (0)

Hi all

I have esys 3.30.1 with v.4.24.31_PSdZData_Lite.rar
This is what i use for Coding.

Now i want to do the iStep for my NBTevo ID4 to ID6 and to install carplay.

i saw that there are 2 versions of FULL PSdZData:
For i.e:

v.4.23.12_PSdZData_Full and v.63.3_PSdZData_Full

What are the diferences between the 2? which one to use for the flashing from id4 to id6?

do anyone have a guide to do this?

Thanks!

Last edited by nbt; 08-12-2020 at 08:42 AM..
Appreciate 0
      08-12-2020, 11:24 AM   #16
kubax86
BimmerPost Supporting Vendor
kubax86's Avatar
Germany
457
Rep
887
Posts


Drives: M4
Join Date: Jul 2017
Location: World

iTrader: (3)

They are different versions.
After flash you would need to get Full FSC PACK to activate all features as well as proper coding.

Thanks
__________________
Apple CarPlay for NBT EVO/ENTRYNAV2/MGU (iDrive 5/6/7)
Fullscreen CarPlay Patch for EVO and WAY, Region Changes, Map lifetime Codes, All FSCs, Remote Coding Services

oempackbmw@gmail.com or PM
Appreciate 0
      08-31-2020, 07:38 AM   #17
byvlad
New Member
Ukraine
3
Rep
16
Posts

Drives: BMW 340xi F30
Join Date: May 2019
Location: Kyiv

iTrader: (0)

Somebody knows how to avoid ATM flsl error?
Because EVO is retrofitted and I don't have ATM in my car.
Appreciate 0
      09-05-2020, 11:18 AM   #18
deneyer
Second Lieutenant
Belgium
25
Rep
224
Posts

Drives: BMW
Join Date: Apr 2017
Location: Belgium

iTrader: (0)

Quote:
Originally Posted by netinvader View Post
In order to enable fullscreen CarPlay via a 3rd party .BIN solution, you need to be running on [18-07-549 / NBTevo_O] or greater. For reference, my MY2018 F80 was running [iSTEP 17-07-507 / NBTEvo_L].

This PDF covers the entire process of how to update your NBTevo headunit. Fully documented with photos, screenshots and even a process log so you can follow step by step. This same guide can technically be used to update any module in your car --as always, do your research as your conditions may differ than mine. You assume all responsibility and risk. This guide is for educational purposes only.

Please PM me if you have any feedback.
PDF link is death, can you replace it please? Thanks
Appreciate 0
Post Reply

Bookmarks

Tags
carplay, diy, e-sys, istep

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:12 PM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST