Colourlock- great stuff

[NSX2M4]

The "color" is dead on...
Steps taken are exactly as directed.

1) use CL cleaner.
2) wipe with damp cloth and let dry.
3) sand rough areas smooth with CL sanding pad.
4) apply dye by rubbing, drying each coat with heat gun. 2 coats.
5) apply dye by dabbing the leather each coat and drying with heat gun. 2 coats. NOTE: (It will be bubbly, once heat is applied it drys and gives texture)
6) apply CL conditioner.

Before


After

[NSX2M4]

The cleaner and conditioner did wonders for the leather steering wheel. A nice supple matte finish.

[wknd_M]

That came out nice, I need to do it to my seat as well.

[Jbrown7403]

I did the same in the exact spot on my Silverstone Comp seats with Colourlock! I too was pleasantly surprised with the results!

[jfritz27]

Originally Posted by NSX2M4

The "color" is dead on...
Steps taken are exactly as directed.

1) use CL cleaner.
2) wipe with damp cloth and let dry.
3) sand rough areas smooth with CL sanding pad.
4) apply dye by rubbing, drying each coat with heat gun. 2 coats.
5) apply dye by dabbing the leather each coat and drying with heat gun. 2 coats.
6) apply CL conditioner.

Before
Attachment 2888729

AfterAttachment 2888730

Excellent work, thanks! Mind sharing a link to the exact kit (including color code for Sakhir)? That would be awesome... been meaning to tackle my bolster...

[NSX2M4]

Originally Posted by jfritz27

Excellent work, thanks! Mind sharing a link to the exact kit (including color code for Sakhir)? That would be awesome... been meaning to tackle my bolster...

Thanks. I just bought it off amazon since the Colourlock US site has been down for quite some time. There's only 1 Sakhir orange BMW code that I know of for the interior. I just bought the standard SO kit and the cleaner/condition, sanding pad, and a cleaning brush separately.

[Mintsopoulos]

wow this is awesome. Im in need of this same fix.

[N1rve]

Wow, turned out great. Would definetly use this when the time comes.

[jaylazy2020]

[QUOTE=Jbrown7403;28934505]I did the same in the exact spot on my Silverstone Comp seats with Colourlock! I too was pleasantly surprised with the results![/QUOTE


Would have a link to the product you bought?

The drivers bolster on my Silverstone comp seat could use a touch up.

Thanks

[NSX2M4]

[QUOTE=jaylazy2020;28940848]

Originally Posted by Jbrown7403

I did the same in the exact spot on my Silverstone Comp seats with Colourlock! I too was pleasantly surprised with the results![/QUOTE


Would have a link to the product you bought?

The drivers bolster on my Silverstone comp seat could use a touch up.

Thanks

Dye
https://www.amazon.com/dp/B07L2XG7TX...t_details&th=1

Sanding pad
https://www.amazon.com/dp/B016IJNFZI...roduct_details

Cleaning kit
https://www.amazon.com/dp/B09JGTQQTG...roduct_details

[NSX2M4]

Originally Posted by jfritz27

Excellent work, thanks! Mind sharing a link to the exact kit (including color code for Sakhir)? That would be awesome... been meaning to tackle my bolster...

Posted to jaylazy2020 by mistake. But you can find any BMW color on that link.

[jfritz27]

Originally Posted by NSX2M4

Posted to jaylazy2020 by mistake. But you can find any BMW color on that link.

No prob -- thanks!

[NSX2M4]

Originally Posted by jfritz27

No prob -- thanks!

No problem. This fix is so easy and I'm a very impatient person...
I tested it first on a scuffed area of the SO armrest since I have the M perf one now and was surprised. I couldn't tell it was repaired.
If you have some hard creases in the side bolster by the door you can also heat the leather up to relax it and smooth the creases out. A hair dryer doesn't get hot enough but use caution. Always move the heat gun back and forth and back off multiple times.

[bmwbrad22]

Wow that did an amazing job

Great Work !