M4 CS with MP HAS

[Fatih m4cs]

Hello everyone
I just bought the mp has for my m4cs
I will have them installed 2 weeks later
I have a couple questions
Firstly will i be able lower the front to match the rear because i have 19s up front so the fender gap is really visible
But then there is always the question of ride quality. I dont want it to be super harsh so that i can still daily it and i also dont want to scrape the cs splitter. I also dont want to screw up the cars balance. Can someone provide me the measurement i should use?
Thanks to anyone in advance

[FrozenGT]

I have the MP HAS installed on my 2020 F82 Comp.. from my understanding the stock springs are linear in nature and the HAS Kit springs are progressive. Meaning the ride should be softer when you are not pushing it hard. I could be wrong, but my ride quality is excellent. I am on 763m wheels PS4S tires 19F/20R.. Hope this helps you!

[Fatih m4cs]

I ended up with 603 front 617 rear on 763m 19F 20R wheels i will post the before and after when its done.

[Fatih m4cs]

This is how it ended up
I will be able to see it a week later but i think there is something wrong because they could only lower it this much.
Doesnt look much diffrent than stock
I

[M 4 FUN]

It will not be harsher because it is lower as long as you don't ride on the bump stops. It's a big misunderstanding that the shocks are harder because the car is lower.

[Taylorsherk]

My stock ZCP looks lower than that in the rear.
Somethings gotta be up with the install

[Fatih m4cs]

Originally Posted by M 4 FUN

It will not be harsher because it is lower as long as you don't ride on the bump stops. It's a big misunderstanding that the shocks are harder because the car is lower.

I didnt say it was harsher it just didnt get as low as i wanted it to thats the problem
They probably had an issue with the installation

[NickyC]

Definitely the install. Here is mine on the same setup, and they told me they could have gone plenty lower (I'm going to lower the back a bit in the coming weeks but leave the front as is to protect the lip). Good luck!

[theweebabySeamus]

Looks good, I wouldn't touch a thing.

[Fatih m4cs]

Originally Posted by NickyC

Definitely the install. Here is mine on the same setup, and they told me they could have gone plenty lower (I'm going to lower the back a bit in the coming weeks but leave the front as is to protect the lip). Good luck!

Your car looks amazing !!
Can you send me your measurements please
So that i can talk to him. Im still in london so i cant see the car yet i will fiddle with jt when i get back.

Here are some more pics by the way