07-24-2021, 05:34 PM | #1 |
Private First Class
36
Rep 129
Posts |
FI Interchiller
Hi Guys,
do someone of you has installed the FI Interchiller to get much lower IAT? If so, where did you mount the reservoir tank and how is the experience over all with this? Thanks in advance and best regards
__________________
Instagram: erik_m3g80
|
08-03-2021, 11:24 AM | #3 |
Captain
759
Rep 950
Posts |
I ran the KC kit on my S4 and worked pretty darn good, AIT's would start in the 40's and tap out around 65-68*. I had to insulate the hoses to/from IC as they would freeze up. KC sells a universal kit you can purchase and install, one thing to note is that your heat exchanger might end up heating your coolant for IC if KC is installed prior. I mounted KC on exchanger coolant outlet to KC inlet then KC outlet to IC inlet and others just bypassed completely.
Also overcharge your AC a bit (<.5lbs) to make up for the extra piping/KC exchanger, you'll have to play with that to see what works best. One thing to note is that on a hot day, it may affect your AC performance blowing cool air not cold!! Just a few things I learned from my S4 but worth it lol. Good luck man. https://killerchiller.com/
__________________
M4CS Frozen Blue
ARM DP's/Resonated Mid-pipe | SPL links | Hotchkis bars | JRZ RS2/camber plates | K&N | Koyorad HX | Powerflex purple | Rouge | Spiegler | Speed Eng. snorkel | Vargas CBC/hub | Wagner IC | xHP | Xpel stealth ppf Last edited by Wanted_M; 08-03-2021 at 11:36 AM.. |
Appreciate
1
erik_m3g8036.00 |
Post Reply |
Bookmarks |
|
|