ARMA SPEED
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > Suspension | Brakes | Chassis

Post Reply
 
Thread Tools Search this Thread
      07-14-2019, 01:20 PM   #1
Tommy L Garage
Colonel
2508
Rep
2,077
Posts

Drives: 2017 YMB M3 6MT CP EP VP
Join Date: Dec 2008
Location: Woodbridge, NJ

iTrader: (2)

DIY video: M Performance Height Adjustable Suspension (HAS) install

I know that there are a couple of threads with pictures on installing the M Performance suspension but I don’t think I’ve seen a video.
I had a chance to tackle this job last week and I’ve got to say it was pretty straightforward. I used some tutorials from this website to get the job done. Thanks Carlos - you know who you are

Initially I was very worried about not having a press to do the front suspension. It turns out all you need is a big hammer and that’s it. I was able to hammer everything in place and it sits as it should. I highlighted it in the video in full detail

The front suspension was very easy. I used the jack to loosen up the tension from the spring and undo the top not. Then I dropped everything.

In the back - I marked the camber adjustment bolt to get me in the ball park after I put everything back together, but overall it was also very easy.

What’s annoying about the suspension is the fact that the rear springs are pretty difficult to adjust once you install them. They are hard to get to so make sure you start with a ball park Height to get you started.

The ride quality is a lot better. One of the first things I noticed compared to just the springs is how noticeable are the various suspension settings. With the springs everything felt pretty similar, and comfort did not feel very comfortable. With this setup comfort is comfortable and sport plus is very sporty. I’m super happy with It. Corner balancing is getting done next week and track time hopefully later this month.

Enjoy the clip - hope this helps you out with your DIY.

Oh and this is very similar to KW and Dinan HAS systems when it comes to the installation.





Appreciate 12
M4rkM14.50
fanatic11018.50
CanAutM321104.50
dpgfunk332.50
syx42.00
Agent11br449.50
JTM09375.50
M3ANSPEC393.00
      07-14-2019, 04:07 PM   #2
SherM4n
M4 748(a)
SherM4n's Avatar
United_States
630
Rep
427
Posts

Drives: '18 M4, '12 TT RS, '02 TT
Join Date: Feb 2015
Location: WV, USA

iTrader: (1)

FWIW, a plier-type oil filter wrench makes adjusting the rears much easier. It can chew up the finish a bit on the ring, though, so be careful.
__________________
http://f80.bimmerpost.com/forums/signaturepics/sigpic265822_1.gif
2018 Ferrarirot F82
Appreciate 1
      07-14-2019, 07:03 PM   #3
Mr. Hankey
Christmas Poo
Mr. Hankey's Avatar
892
Rep
1,100
Posts

Drives: '18 GT3, Ex F80x2
Join Date: Oct 2014
Location: New England

iTrader: (0)

Great video Tommy! Nice job with the install and pointing out some of the lesser published details. You motivated me to go out and drop my front a bit more...at 8 threads just like you did. Now mine is level!
__________________
'Twas the size of 'them grilles' that hath immediately freed the binding chains of the mind allowing thee to achieve nirvana: Porsche. They doth not "eventually grow on thou."

Appreciate 1
      07-14-2019, 07:08 PM   #4
Tommy L Garage
Colonel
2508
Rep
2,077
Posts

Drives: 2017 YMB M3 6MT CP EP VP
Join Date: Dec 2008
Location: Woodbridge, NJ

iTrader: (2)

Quote:
Originally Posted by rhk118 View Post
Great video Tommy! Nice job with the install and pointing out some of the lesser published details. You motivated me to go out and drop my front a bit more...at 8 threads just like you did. Now mine is level!
Thanks!
I'm at 5 threads now in the front
Appreciate 1
      07-14-2019, 07:21 PM   #5
Mr. Hankey
Christmas Poo
Mr. Hankey's Avatar
892
Rep
1,100
Posts

Drives: '18 GT3, Ex F80x2
Join Date: Oct 2014
Location: New England

iTrader: (0)

Quote:
Originally Posted by Tommy L Garage View Post
Quote:
Originally Posted by rhk118 View Post
Great video Tommy! Nice job with the install and pointing out some of the lesser published details. You motivated me to go out and drop my front a bit more...at 8 threads just like you did. Now mine is level!
Thanks!
I'm at 5 threads now in the front
Well I saw you set it to 8, then like a little kid couldn't wait! Mine was at 13 threads up in front...but now I guess I know what I'm doing again next weekend

You notice more scraping with your lip now lowered?
__________________
'Twas the size of 'them grilles' that hath immediately freed the binding chains of the mind allowing thee to achieve nirvana: Porsche. They doth not "eventually grow on thou."

Appreciate 0
      07-14-2019, 08:21 PM   #6
matty088
Major
362
Rep
1,206
Posts

Drives: 335i
Join Date: Jan 2012
Location: Ct

iTrader: (1)

Quote:
Originally Posted by Tommy L Garage View Post
Thanks!
I'm at 5 threads now in the front
How is the sport plus? Does the car handle tighter than stock? I suppose u can’t recall
Appreciate 0
      07-14-2019, 10:28 PM   #7
Alan l.
Major General
Alan l.'s Avatar
5341
Rep
8,772
Posts

Drives: 2020 F95 X5M Competition
Join Date: Jun 2009
Location: United States

iTrader: (9)

Good video. Just watched it with my kids next to me

One recommendation that I just found out in my own "clicking suspension" thread is that if your strut collar bolt isn't tight enough it will cause clicking sounds when you are turning the wheel at very slow speeds. I believe that bolt is only suppose to be 50lbs ft tq but I don't think its enough. Several others reported the same fix for their cars as well. I replaced my 7K mile strut top hat thinking it was the issue when it was just the collar bolt not being tight enough I guess during my MS spring install.

Alan
__________________
Appreciate 0
      07-15-2019, 07:06 AM   #8
jmciver
///M SubDriver
jmciver's Avatar
United_States
1824
Rep
2,781
Posts

Drives: 2017 M3, 2020 X7 40i
Join Date: Jul 2016
Location: DMV

iTrader: (0)

Garage List
2017 BMW M3  [10.00]
2020 BMW X7  [0.00]
2019 BMW X3  [0.00]
2009 BMW 128i  [0.00]
Great video. I definitely will use it as I am also considering this suspension upgrade - installing it myself should I do it. But I have a related question.... Based on the fact you DD your M3 AND you take your car to the track periodically, did you consider installing camber plates when installing the HAS kit? Why or why not?
__________________
///M3 COMPETITION 6MT - 2017 F80 Smoked Topaz Metallic
BM3 / MP-HAS / GC Camber Plates / Carbonstructure Interior
X7 XDrive 40i ///M-SPORT - 2020 G07 Arctic Grey Metallic

X3 XDrive 30i - 2019 G01 Mineral White (wife's) / 128i 6MT - 2009 E82 Jet Black (son's)
Appreciate 0
      07-15-2019, 08:47 AM   #9
Porsha
Private First Class
Porsha's Avatar
175
Rep
153
Posts

Drives: E36 M3
Join Date: May 2015
Location: Midwest

iTrader: (0)

Thank you for this!

My set arrives this week (prior to my car haha) and can't wait to get them installed and put them through their paces.
Appreciate 0
      07-15-2019, 08:53 AM   #10
Tommy L Garage
Colonel
2508
Rep
2,077
Posts

Drives: 2017 YMB M3 6MT CP EP VP
Join Date: Dec 2008
Location: Woodbridge, NJ

iTrader: (2)

Quote:
Originally Posted by matty088 View Post
How is the sport plus? Does the car handle tighter than stock? I suppose u can’t recall
Yes - sport plus seems tighter for sure - but very compliant. I mean it's definitely an upgrade



Quote:
Originally Posted by Alan l. View Post
Good video. Just watched it with my kids next to me

One recommendation that I just found out in my own "clicking suspension" thread is that if your strut collar bolt isn't tight enough it will cause clicking sounds when you are turning the wheel at very slow speeds. I believe that bolt is only suppose to be 50lbs ft tq but I don't think its enough. Several others reported the same fix for their cars as well. I replaced my 7K mile strut top hat thinking it was the issue when it was just the collar bolt not being tight enough I guess during my MS spring install.

Alan
I hope this wasn't a horror movie that you picked for your kids

Regarding the clicking - I don't have any but that's good to know. I actually did have clicking with my springs - so hopefully I tightened them enough



Quote:
Originally Posted by jmciver View Post
Great video. I definitely will use it as I am also considering this suspension upgrade - installing it myself should I do it. But I have a related question.... Based on the fact you DD your M3 AND you take your car to the track periodically, did you consider installing camber plates when installing the HAS kit? Why or why not?
Thanks! And honestly I did consider camber plates BEFORE my first track day. After that I realized that my tire wear in the front was perfect, so I did not want to change something that wasn't broken. I get my car aligned "as close to stock as possible" so perhaps that helps. I track the car to have fun - not really to be super competitive. Perhaps guys who drive at the very limit need them?



Quote:
Originally Posted by Porsha View Post
Thank you for this!

My set arrives this week (prior to my car haha) and can't wait to get them installed and put them through their paces.
Awesome! You'll be happy with them. Doing it yourself?
Appreciate 0
      07-15-2019, 10:53 AM   #11
Porsha
Private First Class
Porsha's Avatar
175
Rep
153
Posts

Drives: E36 M3
Join Date: May 2015
Location: Midwest

iTrader: (0)

Quote:
Originally Posted by Tommy L Garage View Post

Awesome! You'll be happy with them. Doing it yourself?
I'm considering it and videos like this help for sure.

One question as I've seen people post about this. After the install, is there any coding needed for the suspension so the EDC resets the compression and rebound rates with the new springs?
Appreciate 0
      07-15-2019, 11:58 AM   #12
Tommy L Garage
Colonel
2508
Rep
2,077
Posts

Drives: 2017 YMB M3 6MT CP EP VP
Join Date: Dec 2008
Location: Woodbridge, NJ

iTrader: (2)

Quote:
Originally Posted by Porsha View Post
I'm considering it and videos like this help for sure.

One question as I've seen people post about this. After the install, is there any coding needed for the suspension so the EDC resets the compression and rebound rates with the new springs?
Technically The manual calls for it but I didn’t do it and I really had no issues. I think it’s to ensure you have the latest and greatest software.
Appreciate 0
      07-15-2019, 12:10 PM   #13
allinon72
Brigadier General
allinon72's Avatar
United_States
4892
Rep
3,783
Posts

Drives: 20' M2C, 23' X1
Join Date: May 2017
Location: Indianapolis, IN

iTrader: (2)

The most useful DIY videos are those done by normal guys with normal tools in the driveway. Thanks Tommy.
Appreciate 3
      07-15-2019, 04:13 PM   #14
x.shell
▆ ✚✚   ▆▆▆▆▆▆
x.shell's Avatar
6577
Rep
5,304
Posts

Drives: ▋ ▉▉
Join Date: Nov 2012
Location:  ▆▆▆ ▆▆▆ ▆

iTrader: (3)

Good job TL. I added the video to the Master Suspension thread.

https://f80.bimmerpost.com/forums/sh....php?t=1143161
Appreciate 0
      07-15-2019, 06:52 PM   #15
jmciver
///M SubDriver
jmciver's Avatar
United_States
1824
Rep
2,781
Posts

Drives: 2017 M3, 2020 X7 40i
Join Date: Jul 2016
Location: DMV

iTrader: (0)

Garage List
2017 BMW M3  [10.00]
2020 BMW X7  [0.00]
2019 BMW X3  [0.00]
2009 BMW 128i  [0.00]
So what are you going to do with the extra set of front EDC dampers . For some of my DIYs in the past I have purchased "practice" parts before (in fact there are still some of them in my garage now )...
__________________
///M3 COMPETITION 6MT - 2017 F80 Smoked Topaz Metallic
BM3 / MP-HAS / GC Camber Plates / Carbonstructure Interior
X7 XDrive 40i ///M-SPORT - 2020 G07 Arctic Grey Metallic

X3 XDrive 30i - 2019 G01 Mineral White (wife's) / 128i 6MT - 2009 E82 Jet Black (son's)
Appreciate 0
      07-15-2019, 06:59 PM   #16
Tommy L Garage
Colonel
2508
Rep
2,077
Posts

Drives: 2017 YMB M3 6MT CP EP VP
Join Date: Dec 2008
Location: Woodbridge, NJ

iTrader: (2)

Quote:
Originally Posted by jmciver View Post
So what are you going to do with the extra set of front EDC dampers . For some of my DIYs in the past I have purchased "practice" parts before (in fact there are still some of them in my garage now )...
Quote:
Originally Posted by x.shell View Post
Good job TL. I added the video to the Master Suspension thread.

Thanks!!!

https://f80.bimmerpost.com/forums/sh....php?t=1143161
Quote:
Originally Posted by jmciver View Post
So what are you going to do with the extra set of front EDC dampers . For some of my DIYs in the past I have purchased "practice" parts before (in fact there are still some of them in my garage now )...
Haha funny. I actually ended up borrowing a set from a friend. I gave him back my fronts after the swap.
Appreciate 0
      07-15-2019, 08:07 PM   #17
minn19
Lieutenant General
minn19's Avatar
13970
Rep
10,061
Posts

Drives: 24 Z06, 23 CT4VBW, 22 PFinder
Join Date: Jul 2013
Location: Minnesota

iTrader: (0)

Hmm, I should of posted my video of my MP HAS install. Drop off car at dealer and pick up 5 series loaner. Drop off loaner tomorrow and pick up car, done!

Kidding aside, I wish I had the time and confidence to do DIYs like this. Great job and great videos, thanks for them!
Appreciate 1
      07-16-2019, 05:10 AM   #18
CanAutM3
General
CanAutM3's Avatar
Canada
21105
Rep
20,741
Posts

Drives: 2021 911 turbo
Join Date: Jan 2012
Location: Montreal

iTrader: (1)

Garage List
Quote:
Originally Posted by minn19 View Post
Hmm, I should of posted my video of my MP HAS install. Drop off car at dealer and pick up 5 series loaner. Drop off loaner tomorrow and pick up car, done!

Kidding aside, I wish I had the time and confidence to do DIYs like this. Great job and great videos, thanks for them!
The benefit of a dealer install is the peace of mind that comes with a full warranty.
__________________
Porsche 911 turbo 2021 992 GT Silver

Previous cars: M4cs 2019 F82 Limerock Grey / M4 2015 F82 Silverstone / M3 2008 E92 Silverstone / M3 2002 E46 Carbon Black
Appreciate 0
      07-16-2019, 08:27 AM   #19
Tommy L Garage
Colonel
2508
Rep
2,077
Posts

Drives: 2017 YMB M3 6MT CP EP VP
Join Date: Dec 2008
Location: Woodbridge, NJ

iTrader: (2)

Quote:
Originally Posted by CanAutM3 View Post
The benefit of a dealer install is the peace of mind that comes with a full warranty.
What is the warranty for? Springs breaking? Or struts leaking?
If my struts leak the dealer would still replace them under warranty. I’ve got a great relationship with my guy and he gets $100 from me every time I go
Appreciate 1
minn1913970.00
      07-16-2019, 08:55 AM   #20
CanAutM3
General
CanAutM3's Avatar
Canada
21105
Rep
20,741
Posts

Drives: 2021 911 turbo
Join Date: Jan 2012
Location: Montreal

iTrader: (1)

Garage List
Quote:
Originally Posted by Tommy L Garage View Post
What is the warranty for? Springs breaking? Or struts leaking?
If my struts leak the dealer would still replace them under warranty. I’ve got a great relationship with my guy and he gets $100 from me every time I go
Could be anything. As an example, recently I had the front strut accelerometer go, putting the chassis functions in limp mode at the track. Dealer fixed it no questions asked. If I'd done the MP-HAS installation myself, they might have blamed that for the faulty sensor. Like I said, it is a question of "peace of mind".

But, you're right, a good relationship with one's dealer goes a long way. I am very happy with the relationship I have with my dealer, they've been great with me .
__________________
Porsche 911 turbo 2021 992 GT Silver

Previous cars: M4cs 2019 F82 Limerock Grey / M4 2015 F82 Silverstone / M3 2008 E92 Silverstone / M3 2002 E46 Carbon Black
Appreciate 1
minn1913970.00
      07-17-2019, 12:19 PM   #21
minn19
Lieutenant General
minn19's Avatar
13970
Rep
10,061
Posts

Drives: 24 Z06, 23 CT4VBW, 22 PFinder
Join Date: Jul 2013
Location: Minnesota

iTrader: (0)

Quote:
Originally Posted by CanAutM3 View Post
The benefit of a dealer install is the peace of mind that comes with a full warranty.
Agreed and peace of mind it was done correctly in my case. The rears don't look bad, but no way I'd want to tackle the fronts unless I had someone experienced (such as Tommy) helping me.
Appreciate 0
      07-17-2019, 06:51 PM   #22
Tommy L Garage
Colonel
2508
Rep
2,077
Posts

Drives: 2017 YMB M3 6MT CP EP VP
Join Date: Dec 2008
Location: Woodbridge, NJ

iTrader: (2)

Quote:
Originally Posted by minn19 View Post
Agreed and peace of mind it was done correctly in my case. The rears don't look bad, but no way I'd want to tackle the fronts unless I had someone experienced (such as Tommy) helping me.
Too kind
Appreciate 1
minn1913970.00
Post Reply

Bookmarks

Tags
coilovers, dinan has, f80, f82, kw has, m performance has, springs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:01 AM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST