▀▄ eas | 19x10 / 19x11 Fitment Confirmed - Detailed Photos Inside!

[mercedesc63]

Originally Posted by silverstar335

Resurecting an old thread, is that a mineral white F80? What are the wheel specs and finish?

That car is a ET 25 275/30/19 front and ET 305/30/19 rear... I'm sure it's a much harsher ride due to the less sidewall and tramlines quite a bit (bigger front tire causes this)... here's my car alpine white same color wheels. Same ET as above 265/35 front and 305/30 rear. Better in the rain and better ride on average.

[silverstar335]

Originally Posted by mercedesc63

That car is a ET 25 275/30/19 front and ET 305/30/19 rear... I'm sure it's a much harsher ride due to the less sidewall and tramlines quite a bit (bigger front tire causes this)... here's my car alpine white same color wheels. Same ET as above 265/35 front and 305/30 rear. Better in the rain and better ride on average.

So you have 19x10 ET25 running on 265/35 and 19x11 ET35? running on 305/30.

[mercedesc63]

Originally Posted by silverstar335

So you have 19x10 ET25 running on 265/35 and 19x11 ET35? running on 305/30.

Yes correct no rubbing if you ask me these offsets are as aggressive as can be.

[silverstar335]

Originally Posted by mercedesc63

Yes correct no rubbing if you ask me these offsets are as aggressive as can be.

Trying to order some wheels but I can't decide what the most appropriate offset is. I am definitely staying either with a 265/35/19 + 295/35/19 or a 265/35/19 + 305/30/19 combo. I am currently running 265/35 + 295/35 on the stock rims and it is just fine, traction has also improved significantly.

The BBS FI-Rs are currently number 1 on my list, their offset is not as aggressive: 19x9.5 ET22 and 19x10.5 ET35 which if my math is accurate translates to the outer wall of the wheel extending 4mm and 5mm less than your setup, front and rear respectively. The weight savings are fantastic though, we are talking about 25lbs of unspring weight in comparison to the stock 19 437s.

I am looking at the new HRE R101Ls but their offset is set as well:
19x9.5 ET 22 and 19x11 ET43. Not sure how I feel about the 19x11 ET43.

And then there is always the HRE R101 where you can pick your own offset but those are not as light as the BBS FI-Rs.

Btw, are you lowered? I can't tell by looking at the picture.

[mercedesc63]

Originally Posted by silverstar335

Trying to order some wheels but I can't decide what the most appropriate offset is. I am definitely staying either with a 265/35/19 + 295/35/19 or a 265/35/19 + 305/30/19 combo. I am currently running 265/35 + 295/35 on the stock rims and it is just fine, traction has also improved significantly.

The BBS FI-Rs are currently number 1 on my list, their offset is not as aggressive: 19x9.5 ET22 and 19x10.5 ET35 which if my math is accurate translates to the outer wall of the wheel extending 4mm and 5mm less than your setup, front and rear respectively. The weight savings are fantastic though, we are talking about 25lbs of unspring weight in comparison to the stock 19 437s.

I am looking at the new HRE R101Ls but their offset is set as well:
19x9.5 ET 22 and 19x11 ET43. Not sure how I feel about the 19x11 ET43.

And then there is always the HRE R101 where you can pick your own offset but those are not as light as the BBS FI-Rs.

Btw, are you lowered? I can't tell by looking at the picture.

I am not lowered and am on Non-EDC shocks and springs. The best tire setup in my opinion is 275/30/19 and 305/30/19. I would do Michelin Super Sports no doubt next time.

Check out the HRE and BBS thread I'm sure they would be able to help you out!

[wheelhouse]

I am looking to run RE11r 305 rear wheels with 275 in the front what wheels would you recommend?

[silverstar335]

Originally Posted by wheelhouse

I am looking to run RE11r 305 rear wheels with 275 in the front what wheels would you recommend?

Signature Wheels!

[kevin @ eas]

Originally Posted by wheelhouse

I am looking to run RE11r 305 rear wheels with 275 in the front what wheels would you recommend?

PM coming your way

[SOLIDM4]

Originally Posted by VMRWheels

Few shots of jc05e46m3's car before/after powder coat

Perfect stance.. what set up is this.

[kevin @ eas]

Originally Posted by SOLIDM4

Perfect stance.. what set up is this.

Those would be 19x10 et 25 and 19x11 et 35

[VMRWheels]

Originally Posted by SOLIDM4

Perfect stance.. what set up is this.

Here's a few more pics of the 19x10 / 19x11 setup!

[shay2nak]

Wish I saw this thread a few months earlier.

[SOLIDM4]

Originally Posted by VMRWheels

Here's a few more pics of the 19x10 / 19x11 setup!

Can you PM prices and options ect.

[Justinjay24]

Will 19x9.5 et25 front and 19x11 et25 fit my f82 m4 and what tires size should I run?

[kevin @ eas]

Originally Posted by Justinjay24

Will 19x9.5 et25 front and 19x11 et25 fit my f82 m4 and what tires size should I run?

Front looks good but on the back its going to be a bit aggressive. Ideally you would want something in the et 40's range. The et 25 should work however would have to step down tires probably in the 285 range or below.

[M3SQRD]

Originally Posted by Justinjay24

Will 19x9.5 et25 front and 19x11 et25 fit my f82 m4 and what tires size should I run?

Originally Posted by kevin @ eas

Front looks good but on the back its going to be a bit aggressive. Ideally you would want something in the et 40's range. The et 25 should work however would have to step down tires probably in the 285 range or below.

In a post above, there’s a picture (see below) of a f82 with 19x11et35. Here’s the post:
https://f80.bimmerpost.com/forums/sh...8&postcount=32

Tire size is not stated but it looks like a 305 (possibly a 295, definitely not wider than 305). However, to make a 305 mounted on 11et35 fit, it required significant negative camber (defeats the purpose of mounting a 305, IMO) which is shown in the picture below. Now you’ve stated you can run an 11et25, which sticks out an additional 0.39” relative to the 11et35, with a 285 along with a caveat that you really want something in the range of et40 for an 11” wide wheel. No mention of how much neg camber is required. Also, 11” is the max wheel width a 285 can be mounted on and it’ll result in a very stretched look. So would you 100% guarantee that a 285 will fit on an 11et25 with reasonable rear camber (around-2.0 deg, not -2.5 deg or even more negative) without rubbing anywhere?

I don’t understand why people buy wide wheels with poor offsets, pair them with skinny tires and then dial in as much negative camber as you can get (with aftermarket adjustable arms) just to get them to fit. In the end, they’ve bought an 11” wide wheel yet have less rubber on the road than the stock 275 mounted on a 10et40. Now’s a good time for the Chewbacca defense.

[Justinjay24]

Don't worry I didn't buy it yet. Just wanna ask the experts here what to buy and not to buy. Thanks for the advice!

[Justinjay24]

I have another question I was looking at this wheels 19x10.5 et25 squared do you guys think this will fit without any camber plates? And what tires will fit on it?