Burger Tuning M3/M4 Billet Exhaust Tips - Pictures Inside

[JDE92M3]

Do you know when the angled cut will be available? Or is that still in production and going to take some time? Straight cut looking good!

JD

[mike@x-ph.com]

Originally Posted by JDE92M3

Do you know when the angled cut will be available? Or is that still in production and going to take some time? Straight cut looking good!

JD

They only made 10 sets of each type M3 black, M3 silver, M5 black, M5
silver, to get them out in the wild and for customer feedback.
Assuming the feedback is positive which they expect then it won't be
long for a larger batch.

[nupak]

Hey Mike, just to confirm that my order #6170 I am getting the black tips as you show in the pic

[mike@x-ph.com]

Originally Posted by nupak

Hey Mike, just to confirm that my order #6170 I am getting the black tips as you show in the pic

No sir you ordered the regular black ones for $199, this is another design that was just released. It also costs more

[nupak]

The description says the upgraded tips. Could you please point me to the new ones and I will purchase and return the ones that you have sent for refund when you receive. I am not interested in the old type ones. The newer ones are what I want as they are shorter and won't stick out as much.

[mike@x-ph.com]

Originally Posted by nupak

The description says the upgraded tips. Could you please point me to the new ones and I will purchase and return the ones that you have sent for refund when you receive. I am not interested in the old type ones. The newer ones are what I want as they are shorter and won't stick out as much.

Cant post links here, but if you to our website under exhaust tips for the M3/M4 its clear from the pictures which one is which. Not sure how you ended up getting the wrong ones


Version 1 (that you got)


Version 2(billet tips)

[JDE92M3]

Hey boys so I was really loving the new design of the straight cut BMS exhaust tips in anodized black. The main reason for the switch, I felt my old ones stuck out a bit too much after the AA midpipe install. Not really the fault of AA or BMS, but glad I was able to achieve the look I wanted.

The new tips are perfect IMO! They are very adjustable, and a great length and don't stick out at all. The fitment is spot on, the anodized black color is very sharp and the install takes about 5 minutes or less haha. And I'm loving how the inside lip of the tip semi covers up the inner muffler tip. Also, the tips have a good pressure fit onto OEM muffler tips, so the screws provided seem more like a safety net than necessity. I think the first gen or second gen BMS tips you really can't go wrong, but the adjustability of the second gen ones made it a no brainer for me !

Thanks again Mike@XtremePowerhouse and Ando/Terry BMS

*Sorry for poor lighting had to take it in the garage, because of course it would start to snow after I finished the install*















JD

[TurboSid]

Originally Posted by JDE92M3

Hey boys so I was really loving the new design of the straight cut BMS exhaust tips in anodized black. The main reason for the switch, I felt my old ones stuck out a bit too much after the AA midpipe install. Not really the fault of AA or BMS, but glad I was able to achieve the look I wanted.

The new tips are perfect IMO! They are very adjustable, and a great length and don't stick out at all. The fitment is spot on, the anodized black color is very sharp and the install takes about 5 minutes or less haha. And I'm loving how the inside lip of the tip semi covers up the inner muffler tip. Also, the tips have a good pressure fit onto OEM muffler tips, so the screws provided seem more like a safety net than necessity. I think the first gen or second gen BMS tips you really can't go wrong, but the adjustability of the second gen ones made it a no brainer for me !

Thanks again Mike@XtremePowerhouse and Ando/Terry BMS

*Sorry for poor lighting had to take it in the garage, because of course it would start to snow after I finished the install*

JD

Can they be pushed in further? Stick out too much IMO

[JDE92M3]

Originally Posted by TurboSid

Can they be pushed in further? Stick out too much IMO

They can definitely be pushed in, but I don't like them sitting super flush. I like them to jut out just a little past the diffuser. The issue is the camera angle makes the tips seem like they are sticking out more than they are. I'll try and take better shots later for sure. And I've seen M Performance exhaust, AA exhaust and Akra exhaust and they all sit out like that. So I went for a similar look.

Also keep in mind, the AA midpipe I have installed made the OEM muffler push out about .5". So if your not running a midpipe then tips will sit likely inside by diffuser. Hope this helps.









JD

[mike@x-ph.com]

Looks amazing !!!
JDE92M3

[nokiaprinter]

Looking good, please pm price for black tips

[nupak]

Mike, can I return the ones I purchased and get the billet ones?

[mike@x-ph.com]

Originally Posted by nupak

Mike, can I return the ones I purchased and get the billet ones?

Yes you can return them if they have not been installed yet .. just email me to mike@x-ph.com for the return address

[Flbmwm3]

I was disappointed as I ordered the old ones, waited a long time and Joe at your place confirmed before he shipped me the old design that I would get these new billet ones instead.

I've emailed him several times since receiving them asking about what happened and no response. Really poor bait and switch situation. Can you help Mike?

[blake9220]

Interested in V2, can you PM price if they are available in silver?

[mike@x-ph.com]

Originally Posted by Flbmwm3

I was disappointed as I ordered the old ones, waited a long time and Joe at your place confirmed before he shipped me the old design that I would get these new billet ones instead.

I've emailed him several times since receiving them asking about what happened and no response. Really poor bait and switch situation. Can you help Mike?

Sorry to hear that, definitely not a bait and switch kind of thing.
Forward me the emails and i will take care of it

[mike@x-ph.com]

Originally Posted by blake9220

Interested in V2, can you PM price if they are available in silver?

Check your inbox

[nupak]

One question - the tips(older version) I am returning is 5 1/2 inches long at the top, can you please advise as to the length on the new billet ones that I will be ordering.

[mike@x-ph.com]

Originally Posted by nupak

One question - the tips(older version) I am returning is 5 1/2 inches long at the top, can you please advise as to the length on the new billet ones that I will be ordering.

Billet tips length is 4.75"

[nupak]

Ok, I can work with that.

[dt1845]

These just showed up today. Super easy to install. I used a 6lb. mini sledge and a piece of wood to remove stock tips as the rubber mallet hammer claw method wasn't working for me. Need to wash it now!

Will post more pics when I get my Vorsteiner Rear Diffuser installed next week.

[mike@x-ph.com]

Originally Posted by dt1845

These just showed up today. Super easy to install. I used a 6lb. mini sledge and a piece of wood to remove stock tips as the rubber mallet hammer claw method wasn't working for me. Need to wash it now!

Will post more pics when I get my Vorsteiner Rear Diffuser installed next week.

Thank you for the pics, looks amazing!