European Auto Source (EAS)
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Forum > BMW M3 (F80) and BMW M4 (F82) General Forum

Closed Thread
 
Thread Tools Search this Thread
      07-03-2012, 12:17 PM   #89
bucket328
Lieutenant
bucket328's Avatar
Canada
16
Rep
495
Posts

Drives: 07 328i
Join Date: Oct 2010
Location: Burlington CAN

iTrader: (3)

Garage List
2007 BMW 328i  [10.00]
Quote:
Originally Posted by VTECaddict View Post
I don't know what planet you live on, but all M engines have been modified "vanilla" engines, other than the S85 V10 and S65 V8. So a ground up "M" engine is actually the exception rather than the rule.
Im sorry but I do not agree with you one bit. You may, may be able to strip some of the engines right down to the core and find a minor trace of what once was a mainstream engine, but engines like the s54 and euro s50 b32 are not tweaked versions of regular bmw engines. Nowadays they are though.
__________________
07 328i
Appreciate 0
      07-03-2012, 12:21 PM   #90
bucket328
Lieutenant
bucket328's Avatar
Canada
16
Rep
495
Posts

Drives: 07 328i
Join Date: Oct 2010
Location: Burlington CAN

iTrader: (3)

Garage List
2007 BMW 328i  [10.00]
Quote:
Originally Posted by SCOTT26 View Post
Actually, what you are looking at in terms of "reworked"
is a strengthened aluminium block with a heavily modified cylinder head , The Induction tech is completely all new as will be BMW's latest bi-vanos variable valve timing.
EfficientDynamics plays a huge part in not only lightweight chassis and body panel technology. Engine Stop-Start , on-demand ancillaries operation and Brake Energy regeneration will give the all-new M3 20-25% better efficiency than the current V8.

The First protypes of the BMW M4 Coupe will be seen later this summer.
Is it 100000000% confirmed they are going to call the coupe the M4??
__________________
07 328i
Appreciate 0
      07-03-2012, 12:47 PM   #91
motortrend
Goldmember
25
Rep
315
Posts

Drives: EM Siree
Join Date: Aug 2010
Location: Puerto Rico

iTrader: (2)

I hope the engine has more to offer that what can be done with bolt ons to the N55
Appreciate 0
      07-03-2012, 01:22 PM   #92
mkoesel
Moderator
United_States
7544
Rep
19,366
Posts

Drives: No BMW for now
Join Date: Jun 2006
Location: Canton, MI

iTrader: (1)

Quote:
Originally Posted by Uli_HH View Post
None speaks about an chip tune ... but an re-inforced crank-shaft-house and an new (other) Turbosystem could easily be quoted by the BMW marketing as an heavily redesigned engine and an lightly modified valvetronic as an comlete new (heavily modified) cylinder head ...
And? Neither sounds "cheap" as you said in your first post. This won't be a cheap transformation by any means, unless you consider an S63 a cheap upgrade of an N63.


Quote:
This very innovative charged-pulse system of the S63Tü only works on V engines, because it needs the cylinder outlets to be close together, so that the way for the energetic exhaust gases are relativ short before the reached the turbo scroll ... totaly impossible in any way to be adopted to an I6, where the distance between the first and the last cylinder is very long !!!
They aren't really that close:



The red and green paths in particular have long runners.

I don't believe for one second that it would be "totally impossible" to do something like this with an I6.
Appreciate 0
      07-03-2012, 01:25 PM   #93
mkoesel
Moderator
United_States
7544
Rep
19,366
Posts

Drives: No BMW for now
Join Date: Jun 2006
Location: Canton, MI

iTrader: (1)

Quote:
Originally Posted by SCOTT26 View Post
Some F32/F33 are now with full electricals meaning standard lights etc but
We should see the FEP F32 around August/September , The 3er GT is now in FEP so Bimmerpost photographers look out!
Thanks again for the info. I'm looking forward to seeing more of the F32 as are most of the Bimmerpost readers I'm sure.
Appreciate 0
      07-03-2012, 01:40 PM   #94
JJFESQ
Big Poppa
JJFESQ's Avatar
United_States
9
Rep
140
Posts

Drives: F15 3.5i AW/Mocha
Join Date: May 2012
Location: Long Island

iTrader: (1)

Garage List
2014 535xi  [0.00]
Do what you want with the rest of the line but M3 should be NA .
__________________
F10 535xi AW/Mocha
Appreciate 0
      07-03-2012, 02:45 PM   #95
///M3AN
First Lieutenant
///M3AN's Avatar
United_States
35
Rep
343
Posts

Drives: 2008 Jet Black E90 M3
Join Date: May 2012
Location: NW Arkansas

iTrader: (1)

Garage List
man, this kind of stuff just makes being in the "M club" more exciting! M3/M4 or not, BMW knows how to build anticipation....
Appreciate 0
      07-03-2012, 02:52 PM   #96
ScheerSpeed
Major General
ScheerSpeed's Avatar
United_States
436
Rep
5,766
Posts

Drives: '13 F30 Estoril M-Sport 335i
Join Date: Sep 2006
Location: Miami, FL

iTrader: (14)

looks like they went to a 275 rear tire... definetly more power!
Appreciate 0
      07-03-2012, 02:53 PM   #97
SCOTT26
Major General
SCOTT26's Avatar
5404
Rep
5,824
Posts

Drives: A big F-off German Truck.
Join Date: Jan 2007
Location: WORLDWIDE

iTrader: (0)

Quote:
Originally Posted by bucket328 View Post
Is it 100000000% confirmed they are going to call the coupe the M4??
Yes it is well known in the industry that the more sporting styles of the 3er - The Coupe , Cabrio and Gran Coupe will be designated as the BMW 4er.
The designation allows BMW to move the car further upmarket and charge a further premium.
The 4er family will also allow an eight model series under the F30 with Sedan , Touring and Gran Turismo seperated by the more sporting Coupe , Cabrio and Gran Coupe models.
The same with the BMW 2er - Coupe and Cabrio and potential four door would be split from the Sporthatch.

Quote:
I don't doubt that the wheels match the F8X spy car photos. Keep in mind though, that the original concept E90 M3 was presented with CSL style wheels and not final production wheels. Perhaps they are showing this car with sportier wheels - or they haven't decided on final wheels for the F32 yet? Who knows, I'm just as curious as everyone else!

A complete image of the car would certainly help out!
You have to understand that these details are not final. I have seen prototypes which have used older style BMW wheels because they are still under design finalisation. A lot of these early proposals are not actually cars some are essentially clay models or fibre-glass models for evaluations - it is purely work in progress.
At this stage details are not essentially important.
__________________
The M850i is evidence that BMW have got their mojo back when it comes to dynamic sports cars...
Appreciate 0
      07-03-2012, 03:49 PM   #98
TOPHER325
New Member
5
Rep
22
Posts

Drives: 87 325is
Join Date: Feb 2006
Location: Atlanta

iTrader: (0)

Quote:
Originally Posted by SCOTT26 View Post
You have to understand that these details are not final. I have seen prototypes which have used older style BMW wheels because they are still under design finalisation. A lot of these early proposals are not actually cars some are essentially clay models or fibre-glass models for evaluations - it is purely work in progress.
At this stage details are not essentially important.
Precisely my point - thanks SCOTT26!
__________________
Appreciate 0
      07-03-2012, 05:39 PM   #99
swamp2
Lieutenant General
swamp2's Avatar
United_States
644
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Let's look at n55 being the base engine for the new M3/M3, specifically the bored vs. stroked issue for a larger displacement. I thought I may be able to conclude that the engine simply can not be bored alone to 3.2 liters, but this quick calculation does not quite show that, neither from pure geometric argument nor from a more engineering based argument. It almost shows it but not quite...

n55/n54
Bore: 84 mm
Stroke: 89.6 mm
Bore spacing: 91 mm
Displacement 2.979 l

Cylinder wall thickness between cylinders = 91 - 84 = 7 mm = .28". Just over 1/4 inch.

To get to 3.2 l (a rumored displacement) with bore change alone requires a bore of:

2*((3.2/2.979)*(84/2)^2)^(1/2)

Or 87.1 mm. Let's call it 87.

That would leave .15 inch of material between the cylinders. A shade more than 50% of what you can see in this picture (n54 block shown, these features are identical on the n55 block). Although this looks and feels too thin, engineering is not about look at feel. The stress in this portion of the engine will be roughly

σ = peak combustion pressure * (bore/2)/(thickness between bores)

(Note: This is the simplest thin walled cylinder approximation, which should be decent in this case.)

The peak combustion pressure (really rough estimate) is probably around 1000 psi (full load, high rpm). Anyone want to help me revise that estimate? This IS NOT BMEP, but peak dynamic combustion pressure.

Thus going from 3.0 to 3.2 liters by bore alone will increase the stress in this region by the same ratio as the wall thicknesses, nearly 200% in this case (x 1.86)!

The wall is certainly strong enough to handle a single combustion cycle. The limiting factor in design here is very likely "high cycle fatigue". This is just the repeated loading of the combustion cycle continuously weakening the material on the thin walled aluminum in this area. A practical limit for the allowable stress in typical aluminum alloys used for heads and engine blocks (say A356 alloy at an elevated temperature of 300 deg F) is in the 13000 psi range.

In the new 3.2 l hypothetical design the cylinder wall stress would be about 11000 psi. Very close the 13000 limit.

So in short, without sleeving, the n55 could likely enable a 3.2 l engine by bore increase alone. However, it appears to be producing a design very near fatigue limits. Thus, unlikely but not impossible.

My prediction for the engine is > 3.0 liter displacement and that will be gained by bore and stroke. I think that was also my prediction before this simple investigation...

As I've noted before even 400 hp from a 3 liter engine is already reaching the same hp/l as the Porsche Turbo. An additional reason I think the displacement must be going up.
Attached Images
 
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |
Appreciate 0
      07-03-2012, 07:21 PM   #100
FogCityM3
Colonel
FogCityM3's Avatar
507
Rep
2,395
Posts

Drives: M3 (E90) & Porsche GT3 RS
Join Date: Feb 2012
Location: San Francisco

iTrader: (0)

Keep the Tarp on! feels like the more details about the new M3 come out, the more that reality seems a lot less enjoyable than the fantasy.
Appreciate 0
      07-03-2012, 08:32 PM   #101
swamp2
Lieutenant General
swamp2's Avatar
United_States
644
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Quote:
Originally Posted by m3alabama View Post
400hp out of 3.0? Why is that so hard to imagine? As everyone knows a 500 dollar tune can get that now and even bmw's own 1m is putting down 340 whp which is right about 400 crank hp. That engine is already easily tuned to 450 crank hp.

With new valvetronic technology, lighter parts and a bumped redline to 7200 with 2 resdesigned twin-scroll's instead 1 twin,450 is not only possible but quite easy. Especially with slightly higher capacity turbo's that can move the peak power up the band slightly comapred to where it is now to take advantage of the higher redline possible with lighter parts and new valvetronic tech
You can also make the argument that you can get about 1000 hp/liter from an engine. The difference is a race engine vs. one that should with immense reliability go for 250,000+ miles.

By the way the 1M is not 340 wheel hp but 335 crank hp.

The comparison to the Porsche Turbo with 500 hp from 3.8, despite the totally different engine configurations, is fair one. Porsche has been doing reliable high performance twin turbo 6 cylinder engines for a long time. I don't see the first M3 with FI to radically exceed its power per displacement. 450 hp from 3.0 liters would exceed the Porsche by nearly 15%.
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |
Appreciate 0
      07-03-2012, 09:23 PM   #102
Kayani_1
Lieutenant Colonel
Kayani_1's Avatar
United_States
83
Rep
1,656
Posts

Drives: BMW E92/E60
Join Date: Oct 2009
Location: Houston

iTrader: (1)

I doubt it. The Nissan GT-R and Maclaren MP4-12c both race in GT3 class and in case of GT-R it also has raced in GT/GT1 as well as few of the other racing series across the world. Also, CTS-V races in SCCA etc.

In time the most racing series will adapt to the influx of force induction and hybrid cars. Infact most already have.


Quote:
Originally Posted by bimmerjph View Post
+1

The only nock I see on the upcoming engine is that I think the turbos will keep it out of a lot or racing series. Correct me if I am wrong though.
__________________
nickname"BAD 3",MHD E85 tune,RennArt catback non-resonated exhaust,VRSF Downpipes, VRSF 7"FMIC,VRSF stock side inlets,SSQV BOV,ECS CP,M-performance alcantara steering,retrofit M3 paddle shifters,Alpina B3 tranny flash,AFE power seal CAI,LED angels,ST Coilovers,M3 upper/lower control arms,E93 M3 Front Swaybar ,235/35/19x9 ,275/30/19x9.5. M sport bumpers, CF diffuser. When in doubt..flat out.
Appreciate 0
      07-04-2012, 02:24 AM   #103
aus
Major General
United_States
912
Rep
9,029
Posts

Drives: Odysse
Join Date: Jul 2005
Location: Seal Beach, CA

iTrader: (10)

Quote:
Originally Posted by mhabs View Post
Keep the Tarp on! feels like the more details about the new M3 come out, the more that reality seems a lot less enjoyable than the fantasy.
Sad, but true.

Quote:
Originally Posted by m3alabama View Post
Actually look at all the dyno's out there. Atleast 4 or 5 independant's floating around and all are above 330 whp. Clearly underrated per usual for bmw's FI engines. So I that puts the 1M right at 390 crank hp consistently and I am sure bmw designed it to "last"
Is that stock??? Those are INSANE numbers. That's just under what E9x M3's dyno stock!!! It doesn't overheat at the track either, like the N54 does.


Quote:
Originally Posted by bucket328 View Post
Im sorry but I do not agree with you one bit. You may, may be able to strip some of the engines right down to the core and find a minor trace of what once was a mainstream engine, but engines like the s54 and euro s50 b32 are not tweaked versions of regular bmw engines. Nowadays they are though.
Agreed. For all those saying all the //M engines are based on M/N engines, what was the S52 based on?

.
__________________
Let me get this straight... You are swapping out parts designed by some of the top engineers in the world because some guys sponsored by a company told you it's "better??" But when you ask the same guy about tracking, "oh no, I have a kid now" or "I just detailed my car." or "i just got new tires."
Appreciate 0
      07-04-2012, 03:51 AM   #104
swamp2
Lieutenant General
swamp2's Avatar
United_States
644
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Quote:
Originally Posted by SCOTT26 View Post
Yes it is well known in the industry that the more sporting styles of the 3er - The Coupe , Cabrio and Gran Coupe will be designated as the BMW 4er. The designation allows BMW to move the car further upmarket and charge a further premium.
I know the new M3 and M4 will perform. Nonetheless one can not deny there is just something wrong with a lightly massaged n54 with close to 500 hp in a 65-70k base M4 (guessing the M4 will have even more power than the M3 and will also exhibit engine "reuse" to maximize profit). I guess as long as the cars continue to dominate their classes I can't complain too much. Nonetheless small details like this make the cars undeniably less special and have me looking seriously outside the M brand for the first time in a long time.
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |
Appreciate 0
      07-04-2012, 04:27 AM   #105
swamp2
Lieutenant General
swamp2's Avatar
United_States
644
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Quote:
Originally Posted by m3alabama View Post
Actually look at all the dyno's out there. Atleast 4 or 5 independant's floating around and all are above 330 whp. Clearly underrated per usual for bmw's FI engines. So I that puts the 1M right at 390 crank hp consistently and I am sure bmw designed it to "last"

I am not talking about a full on race engine but rather a lightly tuned engine which has been going on for 4 years now in the n54 community and engines with 150k miles are running strong. I am saying all they have to do is strengthen a few internals and EASILY could get 450 crank out of 3 litres and I mean easily. Then add new valvetronic with a higher redline and new turbo's and 3 litres is enough to easily push 500hp.

There is zero chance this engine will be bigger than 3.0l. Just not going to happen
Getting a bit OT but that's OK I guess...

The first 1M dyno I happened to pull open showed 331 hp (insideline). Either way I trust dyno's about as far as I can toss the crumpled up paper it is printed on. Loss is generally ARBITRARY in a dyno. The only dynos I really trust are from rri.se and they have not done the 1M. Anyway, performance numbers do indicate the 1M may be a bit under rated and I agree that this phenomena seems to exist across multiple FI BMW vehicles. The 335i is clearly underrated. However, the 1M just does not have 390 nor 400 crank hp. No way. 390 crank hp would give the car a superior power to weight ratio than the M3. Curiously enough it never outperforms it.

I doubt the internals of the 1M would need strengthened to reliably offer 450 or even 500 hp. It is all of the other stuff - oil cooling, air cooling, oil pump, water cooling/water pump, etc., etc. It almost certainly has a forged crank, rods and pistons already. There is so much more that goes into an OEMs plans around a vehicles power than most enthusiasts can even fathom.

I can see the argument that the displacement will be 3.0 liters. I'm by no means 100% sure it will be > 3.0. I just think it is most likely.

Also, I highly doubt we will see 500 hp from a 3.0l BMW M engine in any vehicle under development or even in the next after that. That would be a specific power greater than the McLaren MP4-12C. That is simply not realistic any time soon.

Again this has nothing to do with what is possible. It has to do with what is CHEAP and that is BMW's new middle name. Massive parts commonality to serve both the above average quick AWD family luxury grocery getter all the way to the "race bred" M cars. This is their road to CHEAP. Don't take my word for it - this has been presented in many a BMW investor presentation.
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |
Appreciate 0
      07-04-2012, 04:27 AM   #106
Uli_HH
Lieutenant
Uli_HH's Avatar
Germany
111
Rep
585
Posts

Drives: AW M3 E90)/ 523i Touring
Join Date: Nov 2005
Location: Hamburg Germany

iTrader: (0)

Quote:
Originally Posted by swamp2 View Post
I know the new M3 and M4 will perform. Nonetheless one can not deny there is just something wrong with a lightly massaged n54 with close to 500 hp in a 65-70k base M4 (guessing the M4 will have even more power than the M3 and will also exhibit engine "reuse" to maximize profit). I guess as long as the cars continue to dominate their classes I can't complain too much. Nonetheless small details like this make the cars undeniably less special and have me looking seriously outside the M brand for the first time in a long time.
100% agreed ... thatīs the point in the engine issue ... I donīt beleave that the new M3/M4 in any kind would be an bad performer - performance would be better than any precessor !

BUT for me an M3 (until today) was an very special car and that not only meens performance wise ... I am ready to pay an much increased price for an car like an M3 because I get something special an unique ... less than 20% common part are an credo for the M-GmbH (until now) ... an the unique, special and fascinating engine is an important part (if not the most important!) of the Myth M ... I am not really willing to accept an simple "pimped" AG-engine in an M3/M3, what an S55 based on the N55 in any kind would be ... there could the N54/335i(tuning)-Fanboys could say what they want - they just donīt understand the Myth M ... itīs much more than hp, performance and sound !!!


Quote:
Originally Posted by swamp2 View Post
Let's look at n55 being the base engine for the new M3/M3, specifically the bored vs. stroked issue for a larger displacement. I thought I may be able to conclude that the engine simply can not be bored alone to 3.2 liters, but this quick calculation does not quite show that, neither from pure geometric argument nor from a more engineering based argument. It almost shows it but not quite...

n55/n54
Bore: 84 mm
Stroke: 89.6 mm
Bore spacing: 91 mm
Displacement 2.979 l

Cylinder wall thickness between cylinders = 91 - 84 = 7 mm = .28". Just over 1/4 inch.

To get to 3.2 l (a rumored displacement) with bore change alone requires a bore of:

2*((3.2/2.979)*(84/2)^2)^(1/2)

Or 87.1 mm. Let's call it 87.

That would leave .15 inch of material between the cylinders. A shade more than 50% of what you can see in this picture (n54 block shown, these features are identical on the n55 block). Although this looks and feels too thin, engineering is not about look at feel. The stress in this portion of the engine will be roughly

σ = peak combustion pressure * (bore/2)/(thickness between bores)

(Note: This is the simplest thin walled cylinder approximation, which should be decent in this case.)

The peak combustion pressure (really rough estimate) is probably around 1000 psi (full load, high rpm). Anyone want to help me revise that estimate? This IS NOT BMEP, but peak dynamic combustion pressure.

Thus going from 3.0 to 3.2 liters by bore alone will increase the stress in this region by the same ratio as the wall thicknesses, nearly 200% in this case (x 1.86)!

The wall is certainly strong enough to handle a single combustion cycle. The limiting factor in design here is very likely "high cycle fatigue". This is just the repeated loading of the combustion cycle continuously weakening the material on the thin walled aluminum in this area. A practical limit for the allowable stress in typical aluminum alloys used for heads and engine blocks (say A356 alloy at an elevated temperature of 300 deg F) is in the 13000 psi range.

In the new 3.2 l hypothetical design the cylinder wall stress would be about 11000 psi. Very close the 13000 limit.

So in short, without sleeving, the n55 could likely enable a 3.2 l engine by bore increase alone. However, it appears to be producing a design very near fatigue limits. Thus, unlikely but not impossible.

My prediction for the engine is > 3.0 liter displacement and that will be gained by bore and stroke. I think that was also my prediction before this simple investigation...

As I've noted before even 400 hp from a 3 liter engine is already reaching the same hp/l as the Porsche Turbo. An additional reason I think the displacement must be going up.
First of all ... nice review!

But I simple donīt beleave that BMW/M-GmbH on the one hand would re-inforce the engine by puting reinforcement bars on the outside of the crank-shaft-housing and eventually on the engine block and on the other hand would reduce the thickness of the cylinder walls ... so increasing the bore of the engine for me is no suitable option to increase the displacement. Also if BMW is doing so, they need complety new pistons which would have nothing common with other engines ... no way much much too costly!

The only relativ cost effectiv way to increase the displacement of the N55 is to stroke it ... that this make less sence for an high-pressure and high-reving turboengine is clear.

Greets Uli_HH
P.S. ... but there are recent rumors, that the rumored 3.2 I6 could be the engine of choise for the coming M340i, which would have probably an much greater Hp-increase than current M...i models.

Last edited by Uli_HH; 07-04-2012 at 06:17 AM..
Appreciate 0
      07-04-2012, 04:36 AM   #107
swamp2
Lieutenant General
swamp2's Avatar
United_States
644
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Quote:
Originally Posted by Uli_HH View Post
100% agreed ... thatīs the point in the engine issue ... I donīt beleave that the new M3/M4 in any kind would be an bad performer - performance would be better than any precessor !

BUT for me an M3 (until today) was an very special car and that not only meens performance wise ... I am ready to pay an much increased price for an car like an M3 because I get something special an unique ... less than 20% common part are an credo for the M-GmbH (until now) ... an the unique, special and fascinating engine is an important part (if not the most important!) of the Myth M ... I am not really willing to accept an simple "pimped" AG-engine in an M3/M3, what an S55 based on the N55 in any kind would be ... there could the N54/335i(tuning)-Fanboys could say what the wonīt - they just donīt understand the Myth M ... itīs much more than hp, performance and sound !!!

Greets Uli_HH
Yes agreed right back at you!

It is funny how much BMW M USED TO promote 80% different parts on the M cars and REDLINE, REDLINE, REDLINE. Now it's highest price and parts bin cars... Oh well I still may buy one .
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |
Appreciate 0
      07-04-2012, 09:49 AM   #108
NELSON.MLGB
Captain
NELSON.MLGB's Avatar
Canada
47
Rep
713
Posts

Drives: 2010 E92 JB M3
Join Date: Dec 2011
Location: Calgary,AB

iTrader: (2)

whatever happens I still love my s65.
Appreciate 0
      07-04-2012, 01:49 PM   #109
m balla
m balla
Slovakia
14
Rep
155
Posts

Drives: ///M
Join Date: Sep 2011
Location: bslava

iTrader: (0)

It could be possible to do 447/402 from a benzin version of the tri-turbo diesel design. I would more likely buy a 3.2 though because it has more potential. With those big of back tires I'm assuming higher compression w high boost so w a trick intake setup that improves flow modulation, I could foresee twin dual or twin triple scroll turbos as well. But with turbo lag that's where the third turbo comes in. Listening to the exhaust clips it sure seems like there is a lot flow at low rpms so not sure to compare it to n55 sound, triturbo diesel sound or if sounds similar to s63tu. It appears the cylinders have some room to bore outwards but reinforcing def w aluminum block.
Appreciate 0
      07-04-2012, 04:40 PM   #110
swamp2
Lieutenant General
swamp2's Avatar
United_States
644
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Quote:
Originally Posted by m3alabama View Post
Swamp I think we are both pretty much on the same page.

...my only point is I think bmw proved with the 1M that they already have the goods to reach 400 crank hp with 5-6 year old technology (n54) in a reliable fashion.
I'm not so sure we are on the same page. You keep repeating how easy it would be to get 450 hp from 3 liters. I suppose I agree with that in theory but in practice it takes much more than you admit (the points about everything outside of the block and heads - you seem to be ignoring)

Tuners may believe a n54/n55 is reliable with 450 hp but I guarantee BMW M engine engineers do not. Plain and simple.

As well BMW has simply not produced a factory reliable 400 hp with the n54/n55.

Quote:
Originally Posted by m3alabama View Post
kill some more parasitic losses from the lighter valvetrain and updates a few parts could probably achieve the 450 crank number.
In typical discussions about parasitic losses they are all after the crankshaft. Now for the very specialized topic about pre-crank or losses in the actual engine itself: You won't be making any appreciable gains (far less then 1%) from changes in the valvetrain.

We certainly do agree that a flat torque curve and linear power curve extending to around the 7k rpm range is very likely for the next engine.

Cheers.
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |
Appreciate 0
Closed Thread

Bookmarks

Tags
2013 bmw m3, 2013 bmw m4, 2013 m3, 2013 m4, 2014 bmw m3, 2014 m3, 2014 m3 forum, bmw f80, bmw f80 forum, bmw f80 forums, bmw f80 m3, bmw f80 m3 sedan, bmw f82, bmw f82 forum, bmw f82 forums, bmw f82 m3, bmw f82 m3 coupe, bmw f82 m3 forum, bmw f82 m4, bmw f82 m4 coupe, bmw f83, bmw f83 m3, bmw f83 m4, bmw m forum, bmw m forums, bmw m4, bmw m4 coupe, bmw m4 coupe forum, bmw m4 forum, bmw m4 forums, f80, f80 forum, f80 forums, f80 m3, f80 m3 forum, f80 m3 forums, f80 m3 sedan, f82, f82 coupe, f82 forum, f82 forums, f82 m3, f82 m3 coupe, f82 m3 forum, f82 m4, f82 m4 coupe, f82 m4 forum, f82 m4 forums, f83 m3, f83 m4, m forum, m forums, m3 f80, m3 f80 forum, m3 f80 forums, m3 n55, m3 n55 engine, m4 forum, m4 forums, m4 n55

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:47 AM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST