10-12-2021, 03:06 PM | #1 |
Private First Class
134
Rep 197
Posts |
Spring Upgrade for KW V3
Hello,
I currently have KW V3 on my F80 M3 and was looking to upgrade the springs to a set of linear springs for both performance and Clearance for a wider front wheel. I've looked all over the forums but have found nothing. I was wondering what companies offer this and what specification of spring I need. Thank you in advance! |
10-16-2021, 07:08 AM | #2 |
First Lieutenant
179
Rep 331
Posts |
Did you check with Eibach or Swift? Back in my E46 days they used to make replacement springs for a lot of the KW lineup.
__________________
2017 F80 M3 - Mineral White/Amaro Brown
2003 E46 M3 - Jet Black/Cinnamon |
Appreciate
0
|
10-24-2021, 06:07 PM | #3 |
Private First Class
134
Rep 197
Posts |
|
Appreciate
0
|
10-26-2021, 04:08 AM | #4 | |
Major General
13518
Rep 8,163
Posts |
Quote:
__________________
|
|
Appreciate
0
|
10-26-2021, 08:57 AM | #5 |
Captain
492
Rep 688
Posts
Drives: 2015 f80 M3
Join Date: Oct 2016
Location: East Bay Area, CA
|
^what he said.
Gather the measurements you need (spring seat dimensions, spring size, and spring rates you desire) and give that to the spring manufacturers. Swift is a good bet, and possibly try Eibach again but with the above info. They may have a way to cross ref springs they already offer. Keep digging and you will find what you need. Good luck! josh |
Appreciate
0
|
10-26-2021, 10:56 AM | #6 |
Private First Class
51
Rep 139
Posts |
You have to measure the ID of the KW perch to find out what diameter spring to use. I upgraded to linear springs on my KW V3 coilovers(for another vehicle) and needed a spring perch adapter because I had to use a 2.5" spring to match my camber plate. Not sure on spring length though as I haven't done that conversion on this platform.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|