AGENCY POWER TOP MOUNT INTERCOOLER - SILVER BMW F80 M3 | F82 M4 | M2 Comp

[mike@x-ph.com]

Intercoolers are one of the most important parts of a forced induction system. As air becomes more compressed, its temperature increases. Hot air is less dense than cold air and hot air is more susceptible to detonation. The job of the intercooler is to keep charge air temperatures low and consistent. For S55 powered vehicles, BMW uses an air-to-water intercooler. If you enjoy driving hard on canyon roads or the occasional track day, the OEM intercooler quickly becomes a performance bottleneck. Even daily driving can become a challenge for the OEM intercooler in hot climates. The OEM intercooler is very susceptible to heat soak, which results in high charge air temperatures and ultimately less power. The Agency Power F8X intercooler fits into the stock location and offers significantly better cooling compared to stock. Intercooler volume is increased by 61% which results in lower and more consistent charge air temperatures. It's designed as an OEM replacement and doesn't require custom work for installation. With lower and more consistent charge air temperatures, the chance of detonation is greatly decreased and power is increased.

Features:

• 61% Larger Than Stock
• Lower Charge Air Temperatures
• Consistent Charge Air Temperatures
• Reduced Chance of Detonation
• Reduced Change of Heat Soak
• Cooler Air = More Power!
• Available in Silver

Fitment:

• BMW F80 M3
• BMW F82 M4
• BMW F83 M4
• BMW F87 M2 Competition (S55)

[BadM4]

Sexy piece

[Groganrocket]

Pretty, How much?

[mike@x-ph.com]

Originally Posted by BadM4/135

Sexy piece

Originally Posted by Groganrocket

Pretty, How much?

check your inbox

[IcebergM4]

Originally Posted by mike@x-ph.com

check your inbox

Please PM me as well Mike

[tharptroy]

Mike,

This looks to be closer in quality to the CSF than some of the others (I have seen VRSF, Alibaba and CSF In person). All of the vendors are using different numbers of coolant layers and internal fin arrangements, can you share some internal pictures for comparison?

[TR930]

Originally Posted by tharptroy

Mike,

This looks to be closer in quality to the CSF than some of the others (I have seen VRSF, Alibaba and CSF In person). All of the vendors are using different numbers of coolant layers and internal fin arrangements, can you share some internal pictures for comparison?

Has anyone independently tested these to see if they actually offer an improvement over stock??

[mike@x-ph.com]

Originally Posted by Iceberg4

Please PM me as well Mike

Done!

Originally Posted by tharptroy

Mike,

This looks to be closer in quality to the CSF than some of the others (I have seen VRSF, Alibaba and CSF In person). All of the vendors are using different numbers of coolant layers and internal fin arrangements, can you share some internal pictures for comparison?

I do not have any additional pictures but i will ask Agency Power for some

[TX PETE]

Price please.

[Spun Pornhub]

Originally Posted by mike@x-ph.com

I do not have any additional pictures but i will ask Agency Power for some

Please ask them for fin pack shots as well. Very curious to know if Agency Power is any different from its cheaper counterparts.

[MPOOR]

Sick looking part ~!!!! I would also like to know the price ~!

[mike@x-ph.com]

Originally Posted by TX PETE

Price please.

Originally Posted by nysid2007

Sick looking part ~!!!! I would also like to know the price ~!

Done

[Ferg]

Price shipped to 35748. Do you offer a paint option?

[Cmw2738]

I'll take a PM with pricing please. Thx

[AlteredBe4st]

Pm me price please.

[mike@x-ph.com]

[mike@x-ph.com]

My apologies i just realized the picture link was not working properly, its fixed now

[mike@x-ph.com]