[CODING] Missing CAFD Files

[shawnsheridan]

Originally Posted by irx

Attachment 3291709 I select f020, and still get this error

The FA is wrong in some way, or you need to flash FEM_BODY.

[irx]

when reading EPS block

[shawnsheridan]

Originally Posted by irx

Attachment 3291710

And again I tell you, Missing CAFD error, cafd_00000794.caf.012_037_100 is in psdzdata provided. Something is wrong with your setup / install.

[shawnsheridan]

Originally Posted by irx

Attachment 3291714
when reading EPS block

Resource not available? Are you connected to car and have motor running?

[irx]

I saw that I hadn’t completely copied the files, now it lets me continue but it gives me this

[shawnsheridan]

Originally Posted by irx

Attachment 3291735 I saw that I hadn’t completely copied the files, now it lets me continue but it gives me this

You can VO Code it without a Token. If you want to FDL Code it, and use the current E-Sys package, you need a valid Token or update your E-Sys Package. PM sent.

[irx]

Thank you very much for your help, I managed to set it up. and even changed the CAFD file in the editor, clicked Code. But I didn't get the desired result. I installed LED fog lights on the car and edited these values ​​in the file:
NSW_L_DUALSP - aktiv
NSW_L_KALTUEBERWACHUNG nicht_aktiv
NSW_L_WARMUEBERWACHUNG nicht_aktiv
NSW_L_KURZSCHLUSS nicht_aktiv
NSW_L_IS_LED active
NSW_R_DUALSP active
NSW_R_KALTUEBERWACHUNG nicht_aktiv
NSW_R_WARMUEBERWACHUNG nicht_aktiv
NSW_R_KURZSCHLUSS nicht_aktiv
NSW_R_IS_LED aktiv

The error remained on the instrument panel that the fog lights were not working properly. What did I do wrong? Or do I need to remove the error via ISTA after encoding?

[irx]

or tell me how to correctly load an already edited cafd file into the ECU

[shawnsheridan]

Originally Posted by irx

Thank you very much for your help, I managed to set it up. and even changed the CAFD file in the editor, clicked Code. But I didn't get the desired result. I installed LED fog lights on the car and edited these values ​​in the file:
NSW_L_DUALSP - aktiv
NSW_L_KALTUEBERWACHUNG nicht_aktiv
NSW_L_WARMUEBERWACHUNG nicht_aktiv
NSW_L_KURZSCHLUSS nicht_aktiv
NSW_L_IS_LED active
NSW_R_DUALSP active
NSW_R_KALTUEBERWACHUNG nicht_aktiv
NSW_R_WARMUEBERWACHUNG nicht_aktiv
NSW_R_KURZSCHLUSS nicht_aktiv
NSW_R_IS_LED aktiv

The error remained on the instrument panel that the fog lights were not working properly. What did I do wrong? Or do I need to remove the error via ISTA after encoding?

Originally Posted by irx

or tell me how to correctly load an already edited cafd file into the ECU

If you made these FDL Chnages and then Did Code FDL on BDC, and it did not work, I have no idea why.

[Cedric02]

Shawn,

Sorry be of trouble. Would you be willing to send me the following file CAFD_00001EF6_006_050_020? I updated my psdzdata files, but when trying to recode the HU NBT2 with the cafd files, I get lots of errors. Thank you.

[shawnsheridan]

Originally Posted by Cedric02

Shawn,

Sorry be of trouble. Would you be willing to send me the following file CAFD_00001EF6_006_050_020? I updated my psdzdata files, but when trying to recode the HU NBT2 with the cafd files, I get lots of errors. Thank you.

If you have CAFD already, a new one won't solve coding errors. Coding errors come from bad FA or FDL Code Parameters.

[Cedric02]

To tell you a little bit about what happened, I was trying to retrofit a ZGW in my E64 to reprogram ZBE. I was mistakenly led to believe that connecting the ZGW to the EVO wouldn't lock it, but it did, so the CAFD is now gone.

I tried to inject it (the same was I did last time), but it looks like it's not working because I replaced the psdzdata folder with another one that does not contain CAFD_00001EF6_006_050_020.

The CAFD file I was referring to earlier was saved by someone who coded my unit remotely, but this file is corrupt apparently.

I'd really appreciate your help.

[shawnsheridan]

Originally Posted by Cedric02

To tell you a little bit about what happened, I was trying to retrofit a ZGW in my E64 to reprogram ZBE. I was mistakenly led to believe that connecting the ZGW to the EVO wouldn't lock it, but it did, so the CAFD is now gone.

I tried to inject it (the same was I did last time), but it looks like it's not working because I replaced the psdzdata folder with another one that does not contain CAFD_00001EF6_006_050_020.

The CAFD file I was referring to earlier was saved by someone who coded my unit remotely, but this file is corrupt apparently.

I'd really appreciate your help.

cafd_00001ef6.caf.006_050_020 is in latest psdzdata. PM sent.

[iliannavy]

Hello.
i need
cafd_00004508.caf.002_006_014
because is missing in my PSZData

[shawnsheridan]

Originally Posted by iliannavy

Hello.
i need
cafd_00004508.caf.002_006_014
because is missing in my PSZData

Why you need this specific CAFD? It's really old. Latest is cafd_00004508.caf.008_003_025.