E-Sys 3.30.1 & ESYS Launcher PRO 2.8.1 + Cheat Sheets/Guides *DIY*

[shawnsheridan]

Originally Posted by Supersham

OK, I'm still getting the bugs that I was getting in the original post so I will try again tomorrow just to be sure. I'm guessing I have some faulty module that is causing the bugs but my guesses are about as good as my sleeping dog. Thanks for all your help this evening, I really appreciate it. Through sheer embarrassment I feel like selling my bimmer and getting myself a nice pink bicycle with stabilizers. Slainte Shawn. Goodnight.

You will figure it out. Good luck.

[Supersham]

Thanks for your help again, I manage to Flash the HU-CIC this morning successfully. Still getting my gremlins though so I'm going to have to try get some 2nd hand modules and code them in and see if that does anything. If not I'll be getting the pink bike.

[ring0r]

Hey Guys,

i think ive made a mistake in the coding process so ive got a Error by Esys [short vin invalid character).

First i've made some changes with my Car and after that ive started to code with the car of my father (same G20) ive think ive forgotten to Read the new (Fahrzeugauftrag) can i get this fixed? The error occurs only at BDC-Body3

[shawnsheridan]

Originally Posted by ring0r

Hey Guys,

i think ive made a mistake in the coding process so ive got a Error by Esys [short vin invalid character).

First i've made some changes with my Car and after that ive started to code with the car of my father (same G20) ive think ive forgotten to Read the new (Fahrzeugauftrag) can i get this fixed? The error occurs only at BDC-Body3

What is exact error?

[ring0r]

Originally Posted by shawnsheridan

What is exact error?

* cpsdata object contains invalid character in Short-VIN *

[shawnsheridan]

Originally Posted by ring0r

* cpsdata object contains invalid character in Short-VIN *

This is when doing what? Read CPS from an ECU?

[ring0r]

Originally Posted by shawnsheridan

This is when doing what? Read CPS from an ECU?

After Reading the ECU i want to read coding data from BDC then the error appears, all other Control Units working flawless

[shawnsheridan]

Originally Posted by ring0r

After Reading the ECU i want to read coding data from BDC then the error appears, all other Control Units working flawless

Try writing correct VIN to BDC using WriteDataByIdentifierVIN.

E-Sys => Expert Mode => FSC Extended=> WriteDataByIdentifierVIN = Enter xxxxxCARxVINxxxxx => Press “Start” button and check Log window for “ok” result.

[ring0r]

22-07-06 13:29:56,617 [INFO] [] com.bmw.psdz.jobs.uds.MCD3_ReadCPSfromECU: sjob READ_CPS_FROM_ECU/MCD3_ReadCPSfromECU finished Result: [Response 0: [POS_RESP_MESSAGE: job succeeded], [DATA: (7) ff ff ff ff ff ff ff ]] [Thread-67]
22-07-06 13:29:56,617 [INFO] [] com.bmw.prodias.collections.mcd.AbstractNamedColle ction: provided name TP_CONTROL doesn't map to an item [Thread-67]
22-07-06 13:29:56,617 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: Could not read TP_CONTROL successfully cause Code=49184, CodeDescription='Object with name not found', Severity=2051, VendorCode=3, VendorCodeDescription='provided name TP_CONTROL doesn't map to an item' [Thread-67]
22-07-06 13:29:56,617 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: Could not get TP_CONTROL from MCDResponse, the reading of TP_CONTROL will be ignored. [Thread-67]
22-07-06 13:29:56,617 [DEEP_TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: update ECU statistics from job: DA: 0x40 State: 2 [Thread-67]
22-07-06 13:29:56,617 [TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: removing Job: ECUId:BDC_BODY3_0x40com.bmw.prodias.execution.prim itives.mcd.SingleEcuJob[state=25089, primitiveSN=READ_CPS_FROM_ECU, logicalLinkSN=BDC_BODY3_40_ETHERNET] [Thread-67]
22-07-06 13:29:56,617 [TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: removed Job: ECUId:BDC_BODY3_0x40com.bmw.prodias.execution.prim itives.mcd.SingleEcuJob[state=25089, primitiveSN=READ_CPS_FROM_ECU, logicalLinkSN=BDC_BODY3_40_ETHERNET] [Thread-67]
22-07-06 13:29:56,617 [TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LinkPool: closeECUConnection started [Thread-67]
22-07-06 13:29:56,618 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.LinkPool: detaching from logical link BDC_BODY3_40_ETHERNET use count = 0 [Thread-67]
22-07-06 13:29:56,618 [DEEP_TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.Configured DProject: execute stopCom on logicalLink BDC_BODY3_40_ETHERNET [Thread-67]
22-07-06 13:29:56,618 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.Configured DProject: trying to remove logical link BDC_BODY3_40_ETHERNET from project [Thread-67]
22-07-06 13:29:56,618 [INFO] [] com.bmw.prodias.execution.DefaultJobProcessor: logical link BDC_BODY3_40_ETHERNET is not cleanly removable, but will remove (and reset) it anyway [Thread-67]
22-07-06 13:29:56,618 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.Configured DProject: successfully removed logical link [Thread-67]
22-07-06 13:29:56,618 [TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LinkPool: closeECUConnection finished [Thread-67]
22-07-06 13:29:56,618 [TRACE] [] com.bmw.psdz.vehicle.connection.bf.Coding1Jobs: requestCPSfromECU finished for BDC_BODY3 [Thread-67]
22-07-06 13:29:56,618 [DEBUG] [] com.bmw.psdz.connection.facade.ConnectionImpl: unlockProgrammingTarget started for TargetSelector: Project=S18A_21_11_566_V_004_000_001, VehicleInfo=S18A [Thread-67]
22-07-06 13:29:56,618 [INFO] [] com.bmw.psdz.api.impl.bf.ECUBF: API: requestCPS(Connection pConnection,ECUIdentifier pECUIdentifier) finished [Thread-67]
22-07-06 13:29:56,618 [TRACE] [] com.bmw.esys.domain.psdz.Psdz: Result CPS: [B@69a08b9d [Thread-67]
22-07-06 13:29:56,618 [INFO] [] com.bmw.esys.domain.psdz.Psdz: PSdZ: requestCPS Ende [Thread-67]
22-07-06 13:29:56,623 [WARN] [] com.bmw.esys.commons.exception.EsysExceptionHandle r: E-Sys Error -- <CpsData object contains a Short-Vin with an invalid character.> [Thread-67]
com.bmw.esys.commons.exception.EsysException: <CpsData object contains a Short-Vin with an invalid character.>
at com.bmw.esys.domain.cps.CpsData.verifyShortVin(Cps Data.java:219)
at com.bmw.esys.domain.cps.CpsData.generateCpsFromByt eArray(CpsData.java:202)
at com.bmw.esys.domain.cps.CpsData.valueOf(CpsData.ja va:70)
at com.bmw.esys.domain.cps.CpsUtils.readCps(CpsUtils. java:22)
at com.bmw.esys.gui.coding.CodingController.readCps(C odingController.java:652)
at com.bmw.esys.gui.coding.CodingController.doReadCod ingdata(CodingController.java:675)
at com.bmw.esys.gui.coding.CodingController.readCodin gdata(CodingController.java:704)
at com.bmw.esys.gui.coding.CodingView$CodingPanel$Rea dCodingdataAction.doActionPerformed(CodingView.jav a:567)
at com.bmw.esys.gui.AbstractView$AbstractGuiProgressA ction$1.init(AbstractView.java:486)
at com.bmw.esys.gui.component.DialogProgress$2.constr uct(DialogProgress.java:153)
at com.bmw.esys.gui.component.SwingWorker.lambda$new$ 1(SwingWorker.java:133)
at java.lang.Thread.run(Unknown Source)



ive tried the step with the WriteDataByIdentifierVIN but it dont works

[shawnsheridan]

Originally Posted by ring0r

ive tried the step with the WriteDataByIdentifierVIN but it dont works

"doesn't map to an item" normally means incorrect E-Sys Connection Target, or you have FrankenPSdZdata, where new PSdZData version folder was copied on top of older version, rather then deleting and replacing.

[ring0r]

I broke the BDC control unit. I coded the CAFD of my Car to my father's and then everything was bricked ... luckily I know a few people from the BMW dealership who flashed the control units for me with ISTA... :] Now everything works flaweless

[shawnsheridan]

Originally Posted by ring0r

I broke the BDC control unit. I coded the CAFD of my Car to my father's and then everything was bricked ... luckily I know a few people from the BMW dealership who flashed the control units for me with ISTA... :] Now everything works flaweless

[efevural3459]

can i get the activation code i tried to use different est token

[shawnsheridan]

Originally Posted by efevural3459

can i get the activation code i tried to use different est token

Your Receive PM function is disabled. PM me when working.

[Allleeexxx]

Hello, does anyone have valid Token for Esys 3.27.1?

[shawnsheridan]

Originally Posted by Allleeexxx

Hello, does anyone have valid Token for Esys 3.27.1?

Assuming you can use old Launcher PRO 2.8.1, all you need including .est Token and Activation Code is in Post #1.

[farbmw]

Hi Guys

I wonder if someone can help me, I generate EST and put it in my E-sys folder I launch PRO and select the path where the new EST is and I click Launch Now and then I get an error message "EST software token is invalid Invalid token" can someone let me know what I am missing or doing wrong?

Thanks in advance!

[shawnsheridan]

Originally Posted by farbmw

Hi Guys

I wonder if someone can help me, I generate EST and put it in my E-sys folder I launch PRO and select the path where the new EST is and I click Launch Now and then I get an error message "EST software token is invalid Invalid token" can someone let me know what I am missing or doing wrong?

Thanks in advance!

PM sent.

[tex340]

Same for me

I cannot activate my pm system right now.

Are there other ways like E-Mail?

fernst1291@gmx.de

Big Thanks

[shawnsheridan]

Originally Posted by tex340

Same for me

I cannot activate my pm system right now.

Are there other ways like E-Mail?

fernst1291@gmx.de

Big Thanks

No. You can try and PM me on Bimmerfest.

[tex340]

"In order to use the PM system and be a full fledged member of this community, you will have to make a certain number of verified post replies and wait 7 days for your account to be upgraded"

I'm going to wait then.

I just want to code the checkbox for traffic information within the NBT evo module. Do I need a token therefore or is the normal esys sufficient?

[shawnsheridan]

Originally Posted by tex340

"In order to use the PM system and be a full fledged member of this community, you will have to make a certain number of verified post replies and wait 7 days for your account to be upgraded"

I'm going to wait then.

I just want to code the checkbox for traffic information within the NBT evo module. Do I need a token therefore or is the normal esys sufficient?

New E-Sys is Tokenless, but for FDL Coding, you need a CAFD Mapping solution such as BimmerUtility.