BPM
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > Suspension | Brakes | Chassis

Post Reply
 
Thread Tools Search this Thread
      06-27-2019, 05:28 PM   #1
stevehifi
First Lieutenant
161
Rep
367
Posts

Drives: 17 F80 M3 ZCP
Join Date: May 2008
Location: Irvine,CA

iTrader: (2)

ZCP stock ride height measurements needed

Hi Guys,

Anyone have the measurements in mm for the stock ZCP ride height (front and back) so I can compare with?

The measurement is done from the center of the lower lip of the wheels to the center of the fender crease (just underneath).

Here are my measurements (note that I have CS EDC) and that there is half a tank of gas and no one in the car.

Front Right: 651mm
Front Left: 652mm
Rear Right: 622mm
Rear Left: 621mm

Rake is approx: 30mm front to back

Steve
Appreciate 0
      06-30-2019, 04:24 PM   #2
CRRobert
Private First Class
30
Rep
113
Posts

Drives: 18 Avus Blue ZCP M3
Join Date: Dec 2018
Location: Denver, CO

iTrader: (0)

I measured 652 front and 622 rear on mine, ‘18 F80 ZCP, stock 20” rims. I am running on MP HAS now.
Appreciate 0
      06-30-2019, 05:31 PM   #3
stevehifi
First Lieutenant
161
Rep
367
Posts

Drives: 17 F80 M3 ZCP
Join Date: May 2008
Location: Irvine,CA

iTrader: (2)

Quote:
Originally Posted by CRRobert View Post
I measured 652 front and 622 rear on mine, 18 F80 ZCP, stock 20 rims. I am running on MP HAS now.

Thanks for the feedback. I assume you're running the recommended height
from the MP HAS instructions or something else?

Here are the recommended MP HAS heights for 20" rims:
FR: 633mm
RR: 626mm
Appreciate 0
      07-03-2019, 03:25 PM   #4
CRRobert
Private First Class
30
Rep
113
Posts

Drives: 18 Avus Blue ZCP M3
Join Date: Dec 2018
Location: Denver, CO

iTrader: (0)

I am set lower, running camber plates, and corner balanced.
LF: 626
RF: 629
LR: 620
RR: 620
a little lower that what I would like. they were set based off of 19’s which has some differences than if set based on 20’s, even when the rim difference is taken into account.
Appreciate 0
      07-03-2019, 11:26 PM   #5
stevehifi
First Lieutenant
161
Rep
367
Posts

Drives: 17 F80 M3 ZCP
Join Date: May 2008
Location: Irvine,CA

iTrader: (2)

Quote:
Originally Posted by CRRobert View Post
I am set lower, running camber plates, and corner balanced.
LF: 626
RF: 629
LR: 620
RR: 620
a little lower that what I would like. they were set based off of 19s which has some differences than if set based on 20s, even when the rim difference is taken into account.
That's essentially what the GTS runs on the track height setting (assuming
20" rims fr/rr):
RF: 628
RR: 619

Is that the lowest that MP HAS can go or is there more room?

Do you feel the springs on the MP HAS are stiffer or softer than your ZCP springs that you had before?
Appreciate 0
      07-04-2019, 01:07 AM   #6
matty088
Major
252
Rep
1,052
Posts

Drives: 335i
Join Date: Jan 2012
Location: Ct

iTrader: (1)

Love to know if mp has feels stiffer?
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:13 AM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST