Blendmount Discount

GasHead · 02-05-2015, 07:02 AM

I just ordered a Blendmount for my car and there giving discounts for any referrals so if your in the market use it and save some money.

http://blendmount.refr.cc/KSMX8D4

ngilaj · 02-05-2015, 08:23 AM

Do you mind sharing which blendmount you purchased? I bought a BMW-007 based on the side profile picture and it doesn't fit. They are going to send me out another one that should work (006)?

GasHead · 02-05-2015, 06:58 PM

I just ordered the 007 because of the front camera, we will see if it fits.

aussiedave87 · 02-05-2015, 10:00 PM

Quote:

Originally Posted by GasHead

I just ordered a Blendmount for my car and there giving discounts for any referrals so if your in the market use it and save some money.

http://blendmount.refr.cc/KSMX8D4

Will you leave the detector in your car when parked? Are you worried about someome breakimg your window to get a $300 detector?

ngilaj · 02-06-2015, 07:30 AM

theres a release on the back of the blend mount so if you leave the vehicle you can take off the detector. the blend mount will only remain as it is attached to the actual mirror

GasHead · 02-16-2015, 06:08 AM

And with no suction cups on the glass it doesn't look like you have a detector!

aussiedave87 · 02-26-2015, 08:31 PM

Quote:

Originally Posted by GasHead

I just ordered a Blendmount for my car and there giving discounts for any referrals so if your in the market use it and save some money.

http://blendmount.refr.cc/KSMX8D4

Did the 007 fit? I have an F80 without Drivers Assist (in case that matters).

aussiedave87 · 02-26-2015, 08:42 PM

Quote:

Originally Posted by ngilaj

Do you mind sharing which blendmount you purchased? I bought a BMW-007 based on the side profile picture and it doesn't fit. They are going to send me out another one that should work (006)?

Did the 006 fit?

ngilaj · 02-26-2015, 09:12 PM

The 007 didn't originally fit however they sent me a piece that replaces a piece on the 007 to allow the detector to fit. It pretty much gives you more room to play with so you can adjust the RD higher or lower. So to answer the 007 did fit but make sure to ask them for the bigger bottom piece

e36 · 05-05-2015, 09:59 AM

Do you have any pictures?

phidailo · 05-05-2015, 06:27 PM

006 fits with the front camera.

goneloco · 05-05-2015, 06:52 PM

I have a Passport 9500xi. The BlendMount that I have is part # BBE-2017. Works great in my M4. Only problem is the position of the RD blocks the light sensor so it doesn't automatically adjust brightness.

Bahn360Photo · 05-06-2015, 10:47 AM

i use passenger visor and its more stealth and works well. hard to use the visor but my passenger doesnt mind the sacrifice

GasHead · 05-26-2015, 06:47 PM

M3ANS55 · 06-03-2015, 11:27 AM

Just Ordered!!!

GasHead · 06-25-2015, 11:22 AM

Quote:

Originally Posted by goneloco

I have a Passport 9500xi. The BlendMount that I have is part # BBE-2017. Works great in my M4. Only problem is the position of the RD blocks the light sensor so it doesn't automatically adjust brightness.

The mount I have isn't blocking that sensor. And the directions dont show it for that model.

goneloco · 06-25-2015, 04:52 PM

Quote:

Originally Posted by GasHead

Quote:

Originally Posted by goneloco

I have a Passport 9500xi. The BlendMount that I have is part # BBE-2017. Works great in my M4. Only problem is the position of the RD blocks the light sensor so it doesn't automatically adjust brightness.

The mount I have isn't blocking that sensor. And the directions dont show it for that model.

Here is a shot of mine. It is directly below the mirror. The blacked out section of the windshield where the mirror sits seems to block the sensor. Before I got the BlendMount I had the RD suction cupped to the windshield so it sat more forward and didn't block the sensor. Is yours mounted the same way?

Detailers Domain · 06-25-2015, 11:29 PM

Quote:

Originally Posted by phidailo

006 fits with the front camera.

did you use the wire tap?

997usa · 06-26-2015, 03:35 AM

I ordered the 006 and the wiretap for my F83; not yet arrived.

goneloco · 06-26-2015, 10:52 AM

Quote:

Originally Posted by DetailersDomain

did you use the wire tap?

I used the wire tap. Tom@eas had a post telling which wires in the mirror harness to tap. Simple.

997usa · 07-07-2015, 08:23 AM

The 006 (Valentine1) works great for the M4

GasHead · 07-08-2015, 04:21 AM

Yes it sits in the same location but that isn't a head lamp sensor, it's the led warning light for the alarm.

02-05-2015, 07:02 AM	#1
GasHead Private 12 Rep 67 Posts Drives: 2024 X3M SMB Join Date: Nov 2012 Location: Houston, Texas iTrader: (2) Garage List 2024 BMW X3 M [0.00]	Blendmount Discount I just ordered a Blendmount for my car and there giving discounts for any referrals so if your in the market use it and save some money. http://blendmount.refr.cc/KSMX8D4
	Appreciate 1 Tweet Quote

02-05-2015, 08:23 AM	#2
ngilaj New Member 0 Rep 12 Posts Drives: 2015 BMW M4 Convertible Join Date: Jan 2015 Location: NJ iTrader: (0)	Do you mind sharing which blendmount you purchased? I bought a BMW-007 based on the side profile picture and it doesn't fit. They are going to send me out another one that should work (006)?
	Appreciate 0 Quote

02-05-2015, 06:58 PM	#3
GasHead Private 12 Rep 67 Posts Drives: 2024 X3M SMB Join Date: Nov 2012 Location: Houston, Texas iTrader: (2) Garage List 2024 BMW X3 M [0.00]	I just ordered the 007 because of the front camera, we will see if it fits.
	Appreciate 0 Quote

02-06-2015, 07:30 AM	#5
ngilaj New Member 0 Rep 12 Posts Drives: 2015 BMW M4 Convertible Join Date: Jan 2015 Location: NJ iTrader: (0)	theres a release on the back of the blend mount so if you leave the vehicle you can take off the detector. the blend mount will only remain as it is attached to the actual mirror
	Appreciate 0 Quote

02-16-2015, 06:08 AM	#6
GasHead Private 12 Rep 67 Posts Drives: 2024 X3M SMB Join Date: Nov 2012 Location: Houston, Texas iTrader: (2) Garage List 2024 BMW X3 M [0.00]	And with no suction cups on the glass it doesn't look like you have a detector!
	Appreciate 0 Quote

02-26-2015, 09:12 PM	#9
ngilaj New Member 0 Rep 12 Posts Drives: 2015 BMW M4 Convertible Join Date: Jan 2015 Location: NJ iTrader: (0)	The 007 didn't originally fit however they sent me a piece that replaces a piece on the 007 to allow the detector to fit. It pretty much gives you more room to play with so you can adjust the RD higher or lower. So to answer the 007 did fit but make sure to ask them for the bigger bottom piece
	Appreciate 0 Quote

05-05-2015, 09:59 AM	#10
e36 Lieutenant 101 Rep 432 Posts Drives: BMWs Join Date: May 2005 Location: NJ iTrader: (1)	Do you have any pictures?
	Appreciate 0 Quote

05-05-2015, 06:27 PM	#11
phidailo Enlisted Member 14 Rep 34 Posts Drives: Future F80 Join Date: Aug 2014 Location: Houston iTrader: (0)	006 fits with the front camera. Attached Images
	Appreciate 0 Quote

05-05-2015, 06:52 PM	#12
goneloco First Lieutenant 129 Rep 397 Posts Drives: 2019 M4 Join Date: Nov 2014 Location: Rhode Island iTrader: (2) Garage List 2015 BMW M4 [0.00]	I have a Passport 9500xi. The BlendMount that I have is part # BBE-2017. Works great in my M4. Only problem is the position of the RD blocks the light sensor so it doesn't automatically adjust brightness. __________________ 2019 M4 Coupe MG SS DCT ZCP 2015 M4 Coupe MG SS DCT (Trade) 2009 335xi Coupe Dinan Stage 2 (Sold) 2003 M3 Coupe (Sold) 1998 M3 Sedan (RIP)
	Appreciate 1 Quote

05-06-2015, 10:47 AM	#13
Bahn360Photo Fitness Gene 1112 Rep 2,413 Posts Drives: 2018 M4 Join Date: Feb 2014 Location: SoFlo iTrader: (2) Garage List 2006 bmw m5 [10.00] 2016 bmw z4 35is [8.33] 2000 bmw m5 [10.00] 2018 BMW M4 [10.00] 1987 BMW 325 Conver ... [10.00]	i use passenger visor and its more stealth and works well. hard to use the visor but my passenger doesnt mind the sacrifice __________________ Effective 11 Min Home Workouts????? No equipment????? 20 years of experience Spartan Race winner PROtrainer! Click the link?? https://www.youtube.com/c/FitnessGene
	Appreciate 0 Quote

05-26-2015, 06:47 PM	#14
GasHead Private 12 Rep 67 Posts Drives: 2024 X3M SMB Join Date: Nov 2012 Location: Houston, Texas iTrader: (2) Garage List 2024 BMW X3 M [0.00]	still works!
	Appreciate 0 Quote

06-03-2015, 11:27 AM	#15
M3ANS55 Banned 64 Rep 145 Posts Drives: BSM F80 m3 Join Date: Dec 2014 Location: Bloomfield NJ iTrader: (0)	Just Ordered!!!
	Appreciate 0 Quote

06-26-2015, 03:35 AM	#19
997usa First Lieutenant 172 Rep 383 Posts Drives: 2015 F83 M4 - Silverstone Join Date: Aug 2012 Location: Chapel Hill, NC iTrader: (0)	I ordered the 006 and the wiretap for my F83; not yet arrived.
	Appreciate 0 Quote

07-07-2015, 08:23 AM	#21
997usa First Lieutenant 172 Rep 383 Posts Drives: 2015 F83 M4 - Silverstone Join Date: Aug 2012 Location: Chapel Hill, NC iTrader: (0)	The 006 (Valentine1) works great for the M4
	Appreciate 0 Quote

07-08-2015, 04:21 AM	#22
GasHead Private 12 Rep 67 Posts Drives: 2024 X3M SMB Join Date: Nov 2012 Location: Houston, Texas iTrader: (2) Garage List 2024 BMW X3 M [0.00]	Yes it sits in the same location but that isn't a head lamp sensor, it's the led warning light for the alarm.
	Appreciate 0 Quote