eBay product ratings thread

DataNerd · 01-02-2019, 10:01 AM

Quote:

Originally Posted by gman_newyork

I have the same spoiler from the same seller. I ran 2 strips along the edges (full length) and in the middle I had enough room to add a 3rd strip. Rock solid mount.

I see. So 3 single layered strips running the full length. When I first read it I thought you might have double layered the strips on the ends to make up for a fitment issue.

Thanks for the info!

Rockshaker · 01-02-2019, 10:39 PM

Quote:

Originally Posted by mindspin311

Quote:

Originally Posted by Rockshaker

I purchased this same spoiler and installed it today. Fitment is good and it extends really close to the edge of the trunk. I got a little excited when I finished removing the OEM spoiler and tape in record time thanks to the tip on using the Adhesive Eraser Wheel (the install took about 45 minutes) and position spoiler a little too far to the right so my gaps are not equal. Other than that it went pretty smooth.

How did the underside of yours look? Mine had a few rough areas. The front edge of the spoiler had a lip in some areas that I knew would not let it sit flush. I went ahead and sanded the areas smooth. Still need to install.

I had one hole on the bottom other than that it was flawless.

Relak · 01-04-2019, 05:46 PM

Just got my CS style spoiler in from Euro_kingdom and it definitely had a few problem areas. The lip of the spoiler the points outward is where the seam of the clear coat meets and is definitely visible with the spoiler installed. There were also some rough areas with the clear coat and the carbon fiber not really being uniform. I requested an exchange if they can guarantee that the replacement won't have any defects. We'll see what they say. This is the link to the eBay listing: https://rover.ebay.com/rover/0/0/0?m...2F112260790595

DataNerd · 01-04-2019, 07:29 PM

Quote:

Originally Posted by MKitSS

Just got my CS style spoiler in from Euro_kingdom and it definitely had a few problem areas. The lip of the spoiler the points outward is where the seam of the clear coat meets and is definitely visible with the spoiler installed. There were also some rough areas with the clear coat and the carbon fiber not really being uniform. I requested an exchange if they can guarantee that the replacement won't have any defects. We'll see what they say. This is the link to the eBay listing: https://rover.ebay.com/rover/0/0/0?m...2F112260790595

Not sure if you care but that's not the CS spoiler. That's the M4 high kick.

smithf80 · 01-04-2019, 08:11 PM

Quote:

Originally Posted by mindspin311

I have it. Have not had the opportunity to install yet. Looks good from what I can tell. Came with a bunch of hardware. It's not 100% flat when just laying on the floor, but that obviously might change once mounted to the car. I will do my best to take pictures of it during install.

Any update yet?

mindspin311 · 01-05-2019, 08:41 PM

Quote:

Originally Posted by smithf80

Any update yet?

Hoping to have some time tomorrow to play around with it.

smithf80 · 01-06-2019, 04:21 AM

Quote:

Originally Posted by mindspin311

Hoping to have some time tomorrow to play around with it.

mindspin311 · 01-06-2019, 06:19 PM

Quote:

Originally Posted by smithf80

Sorry, didnt happen today. I recently had PPF installed on the front of the car and found some issues that my installer will need to remedy. So I decided to hold off until I know the bumper is set. Sorry :/

chujk1985 · 01-08-2019, 11:24 PM

any feedback on any f80 carbon side skirts on eBay?

///cbrash · 01-09-2019, 10:34 PM

mindspin311 How does the quality appear on the lightwieght front lip replica? Very interesting in one, thanks!

boss2k · 01-11-2019, 11:44 AM

Installed the mperformance spoiler fitment is spot on right till the trunk edges.

My detailer performed the work and he took the factory spoiler off and after he cleaned up the place he showed me 3-4 minor dents on the center of the trunk under the factory spoiler and dont think it was caused by his plastic removal tool. I let it go and had him install the new Mperformance one as it covers the dents , would you have fixed it by PDR? Its at the back of my mind and have to get it fixed if i remove the spoiler.

TommyLights · 01-11-2019, 11:50 AM

Quote:

Originally Posted by smithf80

I bought the same one, since the one I installed at your place got destroyed by a crappy road in Brooklyn.

///cbrash · 01-11-2019, 03:29 PM

Quote:

Originally Posted by Tommy_M4

I bought the same one, since the one I installed at your place got destroyed by a crappy road in Brooklyn.

I did too! I will be installing it first part of next week.

boss2k · 01-13-2019, 01:47 PM

After installing the Ebay performance type spoiler the trunk is not opening all the way up, I felt the spoiler it was pretty light

Anyone experience this?

Sir Loin · 01-13-2019, 02:03 PM

Quote:

Originally Posted by boss2k

After installing the Ebay performance type spoiler the trunk is not opening all the way up, I felt the spoiler it was pretty light

Anyone experience this?

LOL! So much for carbon fiber being light!

I just installed my CF trunk spoiler yesterday. My trunk still opens all the way up lust like before.

Your trunk needs some viagra

jd__m4 · 01-13-2019, 05:26 PM

Quote:

Originally Posted by boss2k

After installing the Ebay performance type spoiler the trunk is not opening all the way up, I felt the spoiler it was pretty light

Anyone experience this?

Yes, adjust the trunk springs to a different setting- there’s a thread somewhere. It takes 30 seconds and gets the trunk back to opening as it should.

boss2k · 01-13-2019, 06:03 PM

Quote:

Originally Posted by eyeamgrewt

Yes, adjust the trunk springs to a different setting- there’s a thread somewhere. It takes 30 seconds and gets the trunk back to opening as it should.

ok will search , so its due to the spoiler?

jd__m4 · 01-13-2019, 06:24 PM

Quote:

Originally Posted by boss2k

ok will search , so its due to the spoiler?

That’s what I’m assuming mine was from, but after I adjusted the tension springs it functions 100%

boss2k · 01-13-2019, 06:29 PM

Quote:

Originally Posted by Sir Loin

LOL! So much for carbon fiber being light!

I just installed my CF trunk spoiler yesterday. My trunk still opens all the way up lust like before.

Your trunk needs some viagra

did you install aftermarket or OEM spoiler?

thebman1212 · 01-15-2019, 12:53 PM

Does anyone know if the carbon fiber splitters from the ebay seller "bulbxpert" is it installed without drilling holes in the bumper and reversible?

Looking for something that doesn't drill holes in the bumper for lease return in the future, and can I install it without using 3m tape, as getting 3m tape off might be tough once its placed onto the front bumper.

damageprone · 01-15-2019, 12:55 PM

Quote:

Originally Posted by thebman1212

Does anyone know if the carbon fiber splitters from the ebay seller "bulbxpert" is it installed without drilling holes in the bumper and reversible?

Looking for something that doesn't drill holes in the bumper for lease return in the future, and can I install it without using 3m tape, as getting 3m tape off might be tough once its placed onto the front bumper.

Just by looking at the area, it doesn't appear that there would be anywhere to drill into unless from the bottom. I'm pretty sure that's a 3M tape item.

thebman1212 · 01-15-2019, 01:16 PM

Quote:

Originally Posted by damageprone

Just by looking at the area, it doesn't appear that there would be anywhere to drill into unless from the bottom. I'm pretty sure that's a 3M tape item.

This is what it says on the ebay post, but a lot of times they aren't as they describe. By the way its written it says you just bolt it on, and no need for 3m tape but I'm not really sure.

No Modification or Cutting Required. Simply Remove the 2 Front Bumper Rubber Under Trays, Then Add These On.

01-04-2019, 05:46 PM	#267
Relak Battle Buddy 247 Rep 453 Posts Drives: X3 Join Date: Nov 2015 Location: Maine iTrader: (2)	Just got my CS style spoiler in from Euro_kingdom and it definitely had a few problem areas. The lip of the spoiler the points outward is where the seam of the clear coat meets and is definitely visible with the spoiler installed. There were also some rough areas with the clear coat and the carbon fiber not really being uniform. I requested an exchange if they can guarantee that the replacement won't have any defects. We'll see what they say. This is the link to the eBay listing: https://rover.ebay.com/rover/0/0/0?m...2F112260790595 Attached Images __________________
	Appreciate 0 Quote

01-08-2019, 11:24 PM	#273
chujk1985 Major 543 Rep 1,029 Posts Drives: 2023 G80 M3 X Comp Join Date: Oct 2018 Location: St. Louis iTrader: (1)	any feedback on any f80 carbon side skirts on eBay?
	Appreciate 0 Quote

01-09-2019, 10:34 PM	#274
///cbrash Second Lieutenant 227 Rep 209 Posts Drives: f80 M3 Join Date: Aug 2017 Location: Edmond, OK iTrader: (0)	mindspin311 How does the quality appear on the lightwieght front lip replica? Very interesting in one, thanks! __________________ Instagram:@skrrrt.garage 2013 C63 AMG (Sold) 2014 Nissan GTR (Sold) 2018 BMW M2 (Sold) 2005 Lotus Elise (Sold) 2015 Bmw M3
	Appreciate 0 Quote

01-11-2019, 11:44 AM	#275
boss2k Colonel 1065 Rep 2,780 Posts Drives: 2021 M2C Join Date: Jan 2010 Location: Atlanta iTrader: (2)	Installed the mperformance spoiler fitment is spot on right till the trunk edges. My detailer performed the work and he took the factory spoiler off and after he cleaned up the place he showed me 3-4 minor dents on the center of the trunk under the factory spoiler and dont think it was caused by his plastic removal tool. I let it go and had him install the new Mperformance one as it covers the dents , would you have fixed it by PDR? Its at the back of my mind and have to get it fixed if i remove the spoiler. Attached Images __________________ 2021 M2C HS/6MT/Exec/Moonroof Last edited by boss2k; 01-11-2019 at 02:24 PM..
	Appreciate 0 Quote

01-13-2019, 01:47 PM	#278
boss2k Colonel 1065 Rep 2,780 Posts Drives: 2021 M2C Join Date: Jan 2010 Location: Atlanta iTrader: (2)	After installing the Ebay performance type spoiler the trunk is not opening all the way up, I felt the spoiler it was pretty light Anyone experience this?
	Appreciate 0 Quote

01-15-2019, 12:53 PM	#284
thebman1212 Private First Class 19 Rep 136 Posts Drives: Frozen G80 Join Date: Oct 2011 Location: Los Angeles iTrader: (0)	Does anyone know if the carbon fiber splitters from the ebay seller "bulbxpert" is it installed without drilling holes in the bumper and reversible? Looking for something that doesn't drill holes in the bumper for lease return in the future, and can I install it without using 3m tape, as getting 3m tape off might be tough once its placed onto the front bumper.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search