|
Post Reply |
|
Thread Tools | Search this Thread |
03-13-2019, 05:12 PM | #1 |
Banned
840
Rep 1,271
Posts |
4 Sale F80 M3 Comp ESS E-Tronic 550 hp/560Ft/lb tq box only 299£
https://www.ebay.co.uk/itm/283438751895
S55 E-tronic tuner 550 HP / 560 lb-ft tq This is the same software as https://esstuning.com their S55 stage 1 tune for 995 USD, which will have shipping at 100 usd and a wait of 48 hours plus once you have the software reader. Then after the software is sent to you. Instead you have the blow which is and directly plugs into your boost pressure sensors, MAFs and knock sensor. It has 3 maps, vs 1 above, drives the same and you can sell it or remove it once you sell the car. ESS E-tronic provides safe, simple to add power to the already potent F8X M series. Unlike other products on the market E-tronic is a sophisticated multi channel controller that has RPM and MAF intergration. This provides full control of boost at all RPM ranges and proper fuel calibrations during partial load which reduces lag in throttle response. All of this without the need to splice into any factory wiring. OEM grade hardware is used to provide high quality, safe, reliable power with excellent driveablility. 3 pre-set calibration maps provide for a very simple installation without the need for setup or adjustments once installed. The included multi stage maps provide everything from linear power delivery for improved traction under boost to max HP / TQ with the use of higher octane fuel. E-Tronic can be disabled or removed from the vehicle at anytime allowing customers to keep their factory warranty. Installation time est 30-45 min. Real life dyno 537+ hp on M3F80 competition w k&n drop in on dyno dynamics at sea level. Smoother than OEM no kangaroo hop. It’s fully reversible. If you have question please PM me. Be reasonable and we can reach a deal unlike on the real life political comedy unfolding on the BBC. Also I have map updates usb stick for M5. F10 Navigation. Last edited by Ghostriderf80; 04-22-2019 at 02:30 PM.. |
03-13-2019, 05:56 PM | #2 |
General
8566
Rep 19,982
Posts
Drives: 911, Cayenne Turbo, Disco 4
Join Date: Sep 2013
Location: Crieff, Perthshire, Scotland
|
Sent you a PM about the pads.
__________________
Current: Porsche 911 991 C4S, Porsche Cayenne Turbo, Land Rover Discovery 4. Gone...G01 X3 M40i, Cayman S 987, F31 340i, Cayman GT4, F82 M4 CP, Lotus Exige V6, G20 330e, F30 330e, Boxster S 987, F31 335d, Mini Cooper SD, E89 Z4, E90 330d 320d, E60 520d, E46 330d 320d, MX5s, E30 325i
|
Appreciate
0
|
03-14-2019, 03:45 AM | #4 |
General
8566
Rep 19,982
Posts
Drives: 911, Cayenne Turbo, Disco 4
Join Date: Sep 2013
Location: Crieff, Perthshire, Scotland
|
I see you tried to reply, but my inbox was full, have now created space if you want to try again.
__________________
Current: Porsche 911 991 C4S, Porsche Cayenne Turbo, Land Rover Discovery 4. Gone...G01 X3 M40i, Cayman S 987, F31 340i, Cayman GT4, F82 M4 CP, Lotus Exige V6, G20 330e, F30 330e, Boxster S 987, F31 335d, Mini Cooper SD, E89 Z4, E90 330d 320d, E60 520d, E46 330d 320d, MX5s, E30 325i
|
Appreciate
0
|
03-19-2019, 04:11 PM | #12 |
Brigadier General
2472
Rep 4,653
Posts |
Does the carbon wheel trim piece fit a normal wheel?
__________________
Steve Roberts UK
F82 M4 I'm running the 2024 London Marathon for the British Forces Foundation - https://www.justgiving.com/fundraising/sr5/ |
Appreciate
0
|
03-19-2019, 04:25 PM | #13 |
Banned
840
Rep 1,271
Posts |
I am not sure however the diameter of the rear plate did not change. So I assume only that yes it does. The part number is available on the rear of it.
|
Appreciate
0
|
03-20-2019, 06:26 AM | #14 | |
Colonel
978
Rep 2,069
Posts |
Quote:
The cf trim does fit both wheels.
__________________
/// BM3 + M-Power ///
|
|
Appreciate
0
|
03-28-2019, 12:36 PM | #17 |
Banned
840
Rep 1,271
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|