|
Post Reply |
|
Thread Tools | Search this Thread |
07-13-2021, 09:19 PM | #1 |
Captain
526
Rep 855
Posts |
suggestion on tool to install bushings on rear camber arm
Hi Guys,
Just wondering if anyone has successfully pressed out and installed new bushings on the rear lower camber arm (one on the wheel carrier and one on the subframe). If so do you happen to know the diameter of the bushings and also what press tool that you used (brand/cost). Thanks, Steve |
07-14-2021, 10:44 AM | #2 |
Brigadier General
3995
Rep 3,530
Posts
Drives: 328d Wagon, M2 Comp, i4 eD35
Join Date: Sep 2016
Location: Bay Area, CA
|
There was a thread about pressing the ball joint on the knuckle out in the F30 forums recently. The ball joint is the same PN (33326792553) between F2x/3x and F8x.
__________________
-328d Wagon Build Log (with helpful reference links)
-My YouTube Channel for some of the best DIYs and in depth information Please don't PM me for suspension recommendations unless interested in paid private consultations. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|