19in 2-Piece wheels clearing CCB?

[DeTh]

Hey guys,
Need a little bit of help here. Looking to possibly trade for CCBs as I have found a good deal local. I am currently on 19in 2-Piece Velos Wheels. My main concern is the hardware lip where the barrel meets the lip will not clear, or be very very close.

If someone happens to have some spare time and wouldn't mine taking some measurements of the radius from the center of the wheel to a few different points on the caliper (front section with M logo, middle section where pad pins are, and largest radius on top of caliper), I would really appreciate it. Thanks!

[M3SQRD]

Originally Posted by DeTh

Hey guys,
Need a little bit of help here. Looking to possibly trade for CCBs as I have found a good deal local. I am currently on 19in 2-Piece Velos Wheels. My main concern is the hardware lip where the barrel meets the lip will not clear, or be very very close.

If someone happens to have some spare time and wouldn't mine taking some measurements of the radius from the center of the wheel to a few different points on the caliper (front section with M logo, middle section where pad pins are, and largest radius on top of caliper), I would really appreciate it. Thanks!

Have you tried calling Velos to check if this specific model clears CCB?

Do you know the offsets, widths, and outer lip sizes? There could be barrel clearance issues if it’s a reverse mount barrel or the CCB calipers could make contact with the inner surface of the wheel face design.