M4 Base to CS Suspension Upgrade?

[_ts]

I was browsing the forums and I found this:

M3 Chassis variants suspension hardware Base/CP/CS:

Front Springs B / C / B
Rear Springs B / C / B
Front Swaybar B / C / B
Rear Swaybar B / C / C
Front damper B / C / C
Rear Damper B / B /B

Am I to take it that all my 2015 Base M4 would need to have the same suspension as a CS is CP front dampers (31318008627 & 31318008628), rear sway bar (33557853266), and then flash the CS software? Can anyone confirm this?

[TopJimmy]

If your base car already has EDC then you can swap over Sport (CS/ZCP) dampers, plug in, and code with kubax86

He can adjust your EDC coding, and can also code your steering and diff to ZCP/CS and bump the MDM into Euro mode.

[alex2364]

No, that’s for the F80 M3. F82 M4 has a different combination of base/CP/CS suspension parts. You need to upgrade a lot more parts on the base F82 to get F82 CS suspension.

https://f80.bimmerpost.com/forums/sh....php?t=1467017