bootmod3: v0.10.100 system update is now available!

[proTUNING Freaks]

Hey everyone,
Wanted to share an update on our recent update. Release 0.10.100 is now out and the changes include:

• New Logging Support: Expanded datalogging abilities through RAM channels on MG1 and MG1 Aurix DME cars (e.g. all variants of the B58 engine including the A90 Supra, S58 in the X3M. See pic of a sample bm3 datalog from an M140i B58 test car attached.

• In combination with non-RAM channels you're able to concurrently capture over 70 channels at over 20 samples per second!

• MEVD DME support for RAM channels is in final testing and coming out shortly.

• Google Chrome is now our officially supported browser. Those using Safari will see a not-supported message displayed.

• Maps download and save right inside the browser for in-browser map management. When flashing a map for the very first time you'll see a popup asking to 'Accept' using browser storage. This feature is the first in a series of upcoming features to allow richer offline user experience (already works with mobile apps).

• Fix for mobile browsers, tapping on input fields (e.g. tap on username field on login or anywhere inside the app) would zoom-in the screen throwing off the UI until a user would refresh.

• N20-EWG Startup Roar added

• N55-PWG Selective DTC Code Removal

• Fix for OBD Agent detection and Download Now Flash Later button (affected by latest changes)

• Updated OBD Agent to 0.10.099

NOTE: To use the new channels, go to the About screen and click on Reset Settings.

MG1/MG1 Aurix New RAM Channels listing:

=== Boost Category ====
Boost Setpoint
Distribution Factor (Turbine/Wastegate)
WGDC (Base)
WGDC (Adder)
WGDC (Actual)
Turbine Base
Turbine Adder
Turbine (Actual)
WGDC (I-Gain)
WGDC (D-Gain)
WGDC (P-Gain)
Boost Target (Intake Manifold)
Airmass for Boost Control

=== Load Category ===
Load (Limit)
Load (Target)
Load (Actual)

=== Turbo / Wastegate Category ===
Target Mass Flow (Corrected for Boost Control)
Target Mass Flow (Exhaust Manifold)

=== Ignition Category ===
Ignition Timing (per Cylinder) (Target Corr.)
Ignition Timing Corr. (per Cylinder)
Ignition Timing (per Cylinder)
Ignition Mode (Cold/Warm)
Ignition Mode (Spool)
Ignition Correction (Total)
Ignition Target

=== Fuel Injection Category ===
Relative Fuel Mass

=== Torque Category ===
Torque for Load (Target)
Torque (Actual)
Torque (Target)

[behindthen0thing]

Wow great news!

[tom @ eas]

Great work, guys!

[M3nmotion18]

PTF,

Great work!!

Quick question about the DTC (Codes) Deactivation from Config?... What's this? it shows to enter codes. Just curious. Thanks!

[McLaren720s]

This is still not available for those with locked DME, correct?

[ssabripo]

Originally Posted by McLaren720s

This is still not available for those with locked DME, correct?

+1

[dcpatters]

This update was pushed to me the other day when I attempted to flash my car. I really like the offline toggle mode now. Safari browser no longer supported

[chewbakam4]

Well done guys!

[LINF83]

Bm3 FTW

[mike@x-ph.com]

Nice

[parabmw]

Is there still an issue with march 2019 update from bmw?

[TheMaster1971NL]

Originally Posted by M3nmotion18

PTF,

Great work!!

Quick question about the DTC (Codes) Deactivation from Config?... What's this? it shows to enter codes. Just curious. Thanks!

What is this for?

[TopJimmy]

Originally Posted by TheMaster1971NL

What is this for?

It's for if your car has other persistent codes (besides the CEL for Catless DPs) like my broken lower rear O2 sensor… In the codes I type "12B304, " and it makes a blue code icon, and I continue to type "12B404, " and it makes a second code icon. Note that I type a space after the comma, which changes my typed code into an icon.

[TheMaster1971NL]

Originally Posted by TopJimmy

It's for if your car has other persistent codes (besides the CEL for Catless DPs) like my broken lower rear O2 sensor… In the codes I type "12B304, " and it makes a blue code icon, and I continue to type "12B404, " and it makes a second code icon. Note that I type a space after the comma, which changes my typed code into an icon.

Ok, thanks. Then the dme ignors these codes without problems?

[Info@mad-us.com]

[TopJimmy]

Originally Posted by TheMaster1971NL

Ok, thanks. Then the dme ignors these codes without problems?

Yep.

[18BMWX5M]

Originally Posted by TopJimmy

Yep.

If I'm getting an Oxygen sensor code when running an emissions app to check for rediness, will using this help them become ready or help the system to think they're ready to pass inspection?

[TopJimmy]

Originally Posted by 18BMWX5M

If I'm getting an Oxygen sensor code when running an emissions app to check for rediness, will using this help them become ready or help the system to think they're ready to pass inspection?

Turning off or disabling a code won't get you "ready" to pass…

[18BMWX5M]

Originally Posted by TopJimmy

Turning off or disabling a code won't get you "ready" to pass…

I'm getting three monitors not ready:

Oxygen Sensor
EGR System
Catalyst

I've cleared adaptations, cleared any codes, and still can't get these to go ready. Any ideas on how to get them ready?

[TopJimmy]

I was never able to get all ready with a tune applied…tried for a month. I needed to do a stock tune with stock cats to pass.

[18BMWX5M]

Originally Posted by TopJimmy

I was never able to get all ready with a tune applied…tried for a month. I needed to do a stock tune with stock cats to pass.

My M4 passed with just one monitor not ready and defoulers on the rear oxygen sensor.

[deemack79]

Zero issues passing in NY with defoulers on rear O2's